Today's Message Index:
----------------------
1. 01:24 PM - wiring harness debugging (kerrjohna@comcast.net)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | wiring harness debugging |
1.25 RCVD_NUMERIC_HELO Received: contains an IP address used for HELO
--> RV9-List message posted by: kerrjohna@comcast.net
follow up report on the debugging. pin by pin along with getting help to understand
that switched 14v is internal, etc and everything checks out.
the stroke of luck was that the trim indicators wires were run as a 6 wire shielded
and after grounding the shield the flashing indicators when the PTT was pushed
went away. It was a good suggestion from the list that had me looking there
first, and for the rest of you plan in advance to shield the indicator wires
from the PPT lead forward.
John Kerr
just fiberglass and paint left
follow up report on the debugging. pin by pin along with getting help to understand
that switched 14v is internal, etc and everything checks out.
the stroke of luck was that the trim indicators wires were run as a 6 wire shielded
and after grounding the shield the flashing indicators when the PTT was pushed
went away. It was a good suggestion from the list that had me looking there
first, and for the rest of you plan in advance toshield the indicator wires
from the PPT lead forward.
John Kerr
justfiberglass and paint left
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|