RV9-List Digest Archive

Wed 06/01/05


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 02:09 PM - Re: RV9-List Digest: 4 Msgs - 05/31/05 (Bobdeva@aol.com)
     2. 02:19 PM - cabin carpet? (Bobdeva@aol.com)
     3. 02:36 PM - Re: cabin carpet? (Bill Cary)
     4. 04:01 PM - Re: cabin carpet? (N55XS)
     5. 04:04 PM - Re: cabin carpet? (Dale Larsen)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:09:28 PM PST US
    From: Bobdeva@aol.com
    Subject: Re: RV9-List Digest: 4 Msgs - 05/31/05
    --> RV9-List message posted by: Bobdeva@aol.com


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:19:42 PM PST US
    From: Bobdeva@aol.com
    Subject: cabin carpet?
    --> RV9-List message posted by: Bobdeva@aol.com Has anyone come up with a good way to fasten a carpet down? I insulated with Ensolite and then carefully fit a piece of carpet. Problem is every time I push forward with my feet to exit, the carpet slides forward slightly. After a dozen or so flights it's bunched up ahead of the rudder pedals. I don't want to glue it down nor do I want any fasteners through the belly. Ideas, Please! Gotta be be an easy, simple way. Thanks, Bob D


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:36:56 PM PST US
    From: "Bill Cary" <williamc@RV9Builder.com>
    Subject: cabin carpet?
    --> RV9-List message posted by: "Bill Cary" <williamc@rv9builder.com> (snip)Has anyone come up with a good way to fasten a carpet down? How about Velcro???


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:01:30 PM PST US
    From: N55XS <topglock@cox.net>
    Subject: Re: cabin carpet?
    --> RV9-List message posted by: N55XS <topglock@cox.net> Try Carpet tape. Available at your local building supply (Lowe's, etc.) Jeff Bobdeva@aol.com wrote: >--> RV9-List message posted by: Bobdeva@aol.com > >Has anyone come up with a good way to fasten a carpet down? I insulated with >Ensolite and then carefully fit a piece of carpet. Problem is every time I >push forward with my feet to exit, the carpet slides forward slightly. After a >dozen or so flights it's bunched up ahead of the rudder pedals. I don't want to >glue it down nor do I want any fasteners through the belly. Ideas, Please! >Gotta be be an easy, simple way. > >Thanks, Bob D > > > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:04:48 PM PST US
    From: "Dale Larsen" <slickrock@been-there.com>
    Subject: Re: cabin carpet?
    --> RV9-List message posted by: "Dale Larsen" <slickrock@been-there.com> Bob, My floor carpet is glued to 1/2" padding and then some heavy cardboard material, the kind they use in upholstery. It is then laid in the floor sections with the end butting against the firewall. This makes the whole assembly rigid enough that the carpet does not bunch up when getting in/out, and is still easily removable. No fasteners. Dale ----- Original Message ----- From: <Bobdeva@aol.com> Subject: RV9-List: cabin carpet? > --> RV9-List message posted by: Bobdeva@aol.com > > Has anyone come up with a good way to fasten a carpet down? I insulated > with > Ensolite and then carefully fit a piece of carpet. Problem is every time I > push forward with my feet to exit, the carpet slides forward slightly. > After a > dozen or so flights it's bunched up ahead of the rudder pedals. I don't > want to > glue it down nor do I want any fasteners through the belly. Ideas, > Please! > Gotta be be an easy, simple way. > > Thanks, Bob D > > >




    Other Matronics Email List Services

  • Post A New Message
  •   rv9-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV9-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv9-list
  • Browse RV9-List Digests
  •   http://www.matronics.com/digest/rv9-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --