Today's Message Index:
----------------------
1. 06:14 AM - Re: Elevator horn alignment (Albert Gardner)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Elevator horn alignment |
--> RV9-List message posted by: "Albert Gardner" <ibspud@adelphia.net>
Mine weren't predrilled but the alignment wasn't critical. I think the
important thing is to make both sides the same. Small differences are taken
care of when you align the elevators and then drill the holes that connect
them to each other and the elevator push/pull tube.
Albert Gardner
RV-9A N872RV 500 hours
Yuma, AZ
-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com] On Behalf Of EXT-Allen, David
Subject: RV9-List: Elevator horn alignment
--> RV9-List message posted by: "EXT-Allen, David" <david.allen@boeing.com>
My RV9A instructions say to clamp the powder coated elevator horn in
place and align it with the centerline of the elevator spar before
drilling it to the spar and to the inboard rib.
Anyone have a suggestion on how to do this alignment?
Thanks for your help.
Dave Allen
RV9A Empennage
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|