---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Wed 06/29/05: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:14 AM - Re: Elevator horn alignment (Albert Gardner) ________________________________ Message 1 _____________________________________ Time: 06:14:58 AM PST US From: "Albert Gardner" Subject: RE: RV9-List: Elevator horn alignment --> RV9-List message posted by: "Albert Gardner" Mine weren't predrilled but the alignment wasn't critical. I think the important thing is to make both sides the same. Small differences are taken care of when you align the elevators and then drill the holes that connect them to each other and the elevator push/pull tube. Albert Gardner RV-9A N872RV 500 hours Yuma, AZ -----Original Message----- From: owner-rv9-list-server@matronics.com [mailto:owner-rv9-list-server@matronics.com] On Behalf Of EXT-Allen, David Subject: RV9-List: Elevator horn alignment --> RV9-List message posted by: "EXT-Allen, David" My RV9A instructions say to clamp the powder coated elevator horn in place and align it with the centerline of the elevator spar before drilling it to the spar and to the inboard rib. Anyone have a suggestion on how to do this alignment? Thanks for your help. Dave Allen RV9A Empennage