Today's Message Index:
----------------------
 
     1. 11:59 AM - Fw: Engine decision time ... (Gerry Filby)
 
 
 
Message 1
| 					INDEX |  Back to Main INDEX |  
| 					NEXT |  Skip to NEXT Message |  
| 	LIST |  Reply to LIST Regarding this Message |  
| 		SENDER |  Reply to SENDER Regarding this Message |  
  | 
      
      
| Subject:  | Engine decision time ... | 
      
      --> RV9-List message posted by: Gerry Filby <gerf@gerf.com>
      
      
      Thanks to all of you for your helpful posts - lots of food for 
      thought !
      
      g
      
      
      > 
      > --> RV9-List message posted by: Gerry Filby <gerf@gerf.com>
      > 
      > 
      > Fellow builders,
      > 
      > Its that daunting and exciting time to decide what engine to 
      > put in my RV9 (taildragger).  I've decided to rule out the auto 
      > conversions and go Lycosaur (IO-320 or 360) but I could use a 
      > like a little help deciding which.  The 9 fuselage is pretty 
      > much identical to the 7, so it will take a 360.  I know Van's 
      > recommends the 320 as the max for the 9 presumably to limit the 
      > possibility of exceeding Vne for the airframe etc etc.
      > 
      > I'm  wondering if folks already flying their 9s are getting max 
      > performance as advertised with the 320 and thus there's no 
      > purpose to putting in the 360.  My mission is fastest possible 
      > cruise for frequent trips up and down the California coast from 
      > my home base in San Francisco to destinations like LA, San 
      > Diego, Tahoe, Portland, Seattle with the occassional coast to 
      > coast jaunt.  Resale value is probably less of a concern to me 
      > - I can't ever see myself selling this puppy.
      > 
      > Any experiences, thoughts, rants, prejudices and musings will 
      > be most welcome :)
      > 
      > __g__
      > 
      > ========================================================== 
      > Gerry Filby                                  gerf@gerf.com
      >                    Tel: 415 203 9177
      > 
      > 
      > 
      > 
      > 
      > 
      > 
      
      -- 
      __g__
      
      ========================================================== 
      Gerry Filby                                  gerf@gerf.com
                         Tel: 415 203 9177
      
      
      
      
      
      
 
Other Matronics Email List Services
 
 
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
 
 
-- Please support this service by making your Contribution today! --
  
 |