----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Tue 08/23/05: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:06 PM - Flap pushrod cutout  (Merems)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:06:55 PM PST US
From: "Merems" <merems@cox.net>
Subject: RV9-List: Flap pushrod cutout

--> RV9-List message posted by: "Merems" <merems@cox.net>

Fellow builders,

I am preparing my bottom center fuselage skin for riveting and I am trying to determine
the cutout size for the flap pushrod.  I have had the side skins on and
I know there is a slot cut in the side skin for the flap pushrod.  There is
a 3/32 hole in bottom skin that lines up with this slot. I believe this slot
and hole are to joined/enlarged together to form the slot for the pushrod, however
I can't seem to find the proper reference in the drawings or instructions.

If you can enlighten me I would appreciate it.

Paul