---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Wed 09/14/05: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:52 PM - holes in wing ribs & wires (Jef Vervoort) ________________________________ Message 1 _____________________________________ Time: 12:52:12 PM PST US From: "Jef Vervoort" Subject: RV9-List: holes in wing ribs & wires --> RV9-List message posted by: "Jef Vervoort" Deburring the ribs before priming and having made an extra hole of 0.750 inch according the Vans drawing in their FAQ section, I still have this questions: I plan to use the Duct NT 5/8-50 conduit for the wiring of nav light (LED), strobe and maybe halogen landing light in the wing tips. The Bob Archer VOR antenna in the wing tip seems very interesting. Is it good practice to run the coax cable for such Vor antenna in the same conduit? Should I make other holes in the ribs for wires or tubes, maybe for an Efis that I plan. I suppose it is much easier now than later. Thanks. Jef in Belgium; 91031.