Today's Message Index:
----------------------
1. 09:46 PM - Fuselage riveting help? Firewall mount weldment (Merems)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fuselage riveting help? Firewall mount weldment |
INNOCENT GLOBAL 0.0017 1.0000 -4.4666
--> RV9-List message posted by: "Merems" <merems@cox.net>
Fellow RV-9/7 fuselage builders,
I am just about complete with my riveting of my RV-7 fuselage (upside down). I
am having troubles setting the forward most AN426AD4 rivet that joins the side
skin, bottom skin, longeron and firewall weldment. I have tried several different
bucking bars. Most of them are lighter then I would normally use to set
1/8 rivets, but due to the flanges on the weldment I can't use my larger and
heavier bucking bars. I believe most of the energy is going into the structure
and not the rivet. I am using a 3X gun and running 50 psi.
Any thoughts?
Paul
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|