Today's Message Index:
----------------------
1. 04:25 AM - Re: Wavy trailing edge (Chenoweth)
2. 10:19 AM - He Said, She Said... (dralle@matronics.com (Matt Dralle))
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wavy trailing edge |
--> RV9-List message posted by: "Chenoweth" <chenoweth@gwi.net>
Sounds very promising. What sort of "finishing" did you have to do to the
surface of the angle?
Bill
----- Original Message -----
From: "William Letcher" <w.letcher@worldnet.att.net>
Subject: RV9-List: Wavy trailing edge
> --> RV9-List message posted by: "William Letcher"
<w.letcher@worldnet.att.net>
>
> The best way for me to do the trailing edges was to use a piece of 2" X
3" angle iron 1/4" thick,
> mounted into my building table. Use the holes in the trailing edge as your
drill guide and drill every
> other hole into the 3" side of your angle. Drill at a comparable angle to
the finished skins.
> When you are finally ready to rivet the trailing edge, install every other
rivet, tape them into place,
> turn it over and calico the empty holes to the 3" back riveting bar. (The
2" X 3" angle you just drilled)
> Then do the standard back riveting. After every other hole is riveted,
remove the clecoes and back rivet
> the remaining holes. Be careful not to place any of the factory rivet
heads over any of the holes drilled
> into the bar, when you back rivet the remaining rivets.
> This procedure made a very flat trailing edge for me.
> Bill
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | He Said, She Said... |
--> RV9-List message posted by: dralle@matronics.com (Matt Dralle)
Dear Listers,
I've been getting some great feedback from Listers lately along with
their List Contributions. I thought I share a few more of the nice
thoughts people have had regarding the what the Lists mean to them.
Please take a minute right now and make a Contribution to support these
Lists. Remember that its solely *your* generosity that keeps them
running and without your support they would cease to exist.
The Contribution web site is fast and easy:
http://www.matronics.com/contribution
Thank you!
Matt Dralle
Matronics List Administrator
====================== What Listers Are Saying #3 ======================
This is a great deal for aviation info/entertainment.
Christopher R.
Truly a great source of help and information.
Eddie S.
I couldn't imagine building my RV-7A without the 'net
and your lists!
Sebastian T.
Great lists!
Corey C.
Where would I be without the list?
George R.
What a resource!
Clay K.
Great service.
Martin H.
[The List] has such a wealth of information.
David N.
A great resource for builders and flyers.
Gregg W.
I enjoy the Lists.
Gene S.
A great source of information.
Richard N.
This is a great service.
Ralph C.
Great service.
Richard N.
Great resource!
John T.
Very helpfull & we appreciate all your efforts.
Stan B.
Makes me realize how much I don't know that I don't know...
Martin H.
I am not a builder but enjoy the posts.
Doug P.
Great information.
James B.
Thanks to all who share their knowledge and ask the
questions I didn't know enough to ask myself. It will fly
some day.
James M.
Excellent source of information.
Tony C.
While I haven't learned enough to contribute to others very
often, I have learned enough to avoid some mistakes in
building my kit.
CL M.
AeroElectric list is the best!
Dennis J.
[The List] is invaluable.
Benjamin S.
I think of the Kolb List as the daily "Kolb Magazine" of
what's going on.
Bill T.
Great service.
John D.
Have very much appreciated the help, suggestions, and
knowledge of the listers over the course of my project.
Michael S.
A very useful service.
Colin R.
[The List] has saved me from mistakes already several times.
Ron L.
Love the list and hope to see it never change.
David N.
Between the archives, the folks that have already done it,
and the rest of us currently building - I think every tidbit
of knowledge is available to get/keep us in the air.
Ralph C.
====================== What Listers Are Saying #3 ======================
do not archive
--
Matt G. Dralle | Matronics | P.O. Box 347 | Livermore | CA | 94551
925-606-1001 Voice | 925-606-6281 FAX | dralle@matronics.com Email
http://www.matronics.com/ W.W.W. | Featuring Products For Aircraft
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|