----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Sat 11/26/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:38 AM - The List of Contributors Coming Soon - Make Sure You're Listed!  (Matt Dralle)
     2. 06:05 PM - Tip-up mounting question  (Merems)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:38:35 AM PST US
From: Matt Dralle <dralle@matronics.com>
Subject: RV9-List: The List of Contributors Coming Soon - Make Sure You're Listed!

--> RV9-List message posted by: Matt Dralle <dralle@matronics.com>

Hi Listers,

The List of Contributors (LOC) is just around the corner!  On 
December 1st I post a list of everyone that so generously made a 
Contribution to support the Lists.  Its sort of my way of publicly 
thanking everyone that took a minute to show their appreciation for the Lists.

Won't you take a moment and assure that your name is on that List of 
Contributors?  As a number of people have pointed out, the List seems 
at least, if not a whole lot more, as valuable as a 
building/flying/recreating tool as a typical your magazine 
subscription.  We won't even talk about a newsstand price... :-)

Won't you take minute and assure that your name is on the upcoming 
LOC?  Tell others that you appreciate the Lists.  Making a 
Contribution to support the Lists is fast and easy using your Visa or 
M/C on the SSL Secure Web Site:

         http://www.matronics.com/contribution

or by popping a personal check in the mail to:

         Matronics Email Lists
         c/o Matt Dralle
         PO Box 347
         Livermore CA 94551-0347

I would like to thank everyone that has so generously made a 
Contribution thus far in this year's List Fund Raiser!  Remember that 
its YOUR support that keeps these Lists going and improving!  Don't 
forget to include a little comment about how the Lists have helped 
you!  I love to feel the love... :-)

Best regards,

Matt Dralle
Email List Administrator


Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
do not archive






________________________________  Message 2  _____________________________________


Time: 06:05:35 PM PST US
From: "Merems" <merems@cox.net>
Subject: RV9-List: Tip-up mounting question
        INNOCENT GLOBAL 0.0000 1.0000 -4.4912

--> RV9-List message posted by: "Merems" <merems@cox.net>

Fellow Tip-Up builders,

I am in the process of building the roll bar/frame for my RV-7A.  The frame halves
are very warped and the flanges aren't 90 as needed.  It has taken some time
to adjust the flanges but the parts are still warped.  I haven't drilled the
inner supporting strips yet, that's tomorrows adventure.

Anyway I have included a photo of the mounting brackets in there approximate position
and note the interference with the seat back stop on the top side of the
bulkhead (circled area).  I believe this is common, but I haven't seen too many
photos of this interference.  I am considering taking a dremel tool and removing
the offending material on the seat back stop.

What have you done to correct this?  Am I the only one (I doubt it)?

Paul