----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Sun 02/19/06: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:38 PM - Re: Pitot static system  ()
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:38:32 PM PST US
From: <dthomas773@sbcglobal.net>
Subject: Re: RV9-List: Pitot static system

--> RV9-List message posted by: <dthomas773@sbcglobal.net>

I would think not.  Actually when you get to the panel
you will use plastic, why not earlier?

Dennis Thomas
RV9, N164DV,second annual, 255 hours

--- "D.Munz" <182ppl@comcast.net> wrote:

> --> RV9-List message posted by: "D.Munz"
> <182ppl@comcast.net>
> 
> This may have been covered in past posts but I will
> ask again. Are  there any reasons that I should
> avoid using poly-tubing for my pitot system.
> 
> 
> 
>
> browse
> Subscriptions page,
> FAQ,
>
> Admin.
>
> 
> 
> 
>  
>  
>  
> 
> 
> 
>