----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Fri 05/05/06: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:09 AM - edge rolling  (Jef Vervoort)
     2. 06:14 AM - Re: edge rolling  (Mike Hoover)
     3. 08:27 AM - Re: edge rolling  (Michael Schipper)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:09:08 AM PST US
From: "Jef Vervoort" <jef.vervoortw@telenet.be>
Subject: RV9-List: edge rolling

--> RV9-List message posted by: "Jef Vervoort" <jef.vervoortw@telenet.be>

Has anybody used an Edge rolling tool on the wing skins ( I bought one from
Avery)?

Should we roll the edges before dimpling the rivet holes?

All 4 edges or just the 2 longer ones?

Jef Vervoort 91031, wing skins.








 
 
 



________________________________  Message 2  _____________________________________


Time: 06:14:51 AM PST US
From: "Mike Hoover" <mikehoover@sc.rr.com>
Subject: RE: RV9-List: edge rolling

--> RV9-List message posted by: "Mike Hoover" <mikehoover@sc.rr.com>

I would definitely roll the edges before dimpling. I rolled the skins that
overlapped another one. Not sure if I rolled the forward edge that butts up
to the leading edge skin, but a little couldn't hurt.

Mike
RV-9A fuse

-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com] On Behalf Of Jef Vervoort
Sent: Friday, May 05, 2006 7:04 AM
Subject: RV9-List: edge rolling

--> RV9-List message posted by: "Jef Vervoort" <jef.vervoortw@telenet.be>

Has anybody used an Edge rolling tool on the wing skins ( I bought one from
Avery)?

Should we roll the edges before dimpling the rivet holes?

All 4 edges or just the 2 longer ones?

Jef Vervoort 91031, wing skins.








 
 
 










 
 
 



________________________________  Message 3  _____________________________________


Time: 08:27:17 AM PST US
From: Michael Schipper <mike@learningplanet.com>
Subject: Re: RV9-List: edge rolling

--> RV9-List message posted by: Michael Schipper <mike@learningplanet.com>

Hi Jef,

I would only roll the edges which go on the spar. The trailing edges  
of the skins don't need to be rolled, and certainly not the sides. I  
would roll before dimpling for sure.

Mike Schipper
RV-9A - N63MS - Flying
www.my9a.com


On May 5, 2006, at 6:04 AM, Jef Vervoort wrote:

> --> RV9-List message posted by: "Jef Vervoort"  
> <jef.vervoortw@telenet.be>
>
> Has anybody used an Edge rolling tool on the wing skins ( I bought  
> one from
> Avery)?
>
> Should we roll the edges before dimpling the rivet holes?
>
> All 4 edges or just the 2 longer ones?
>
> Jef Vervoort 91031, wing skins.
>
>