Today's Message Index:
----------------------
1. 02:42 AM - Re: edge rolling (John Oliveira)
2. 05:51 PM - Re: edge rolling (Bob Kelly)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: edge rolling |
--> RV9-List message posted by: "John Oliveira" <oliveira@frontiernet.net>
The only edge to roll are those that overlap. I only rolled the upper skin
where they overlap. The skin on the spar that butts up against the tank
skin or leading edge skin does not need to be rolled.
John Oliveira
----- Original Message -----
From: "Michael Schipper" <mike@learningplanet.com>
Sent: Friday, May 05, 2006 11:24 AM
Subject: Re: RV9-List: edge rolling
> --> RV9-List message posted by: Michael Schipper <mike@learningplanet.com>
>
> Hi Jef,
>
> I would only roll the edges which go on the spar. The trailing edges
> of the skins don't need to be rolled, and certainly not the sides. I
> would roll before dimpling for sure.
>
> Mike Schipper
> RV-9A - N63MS - Flying
> www.my9a.com
>
>
> On May 5, 2006, at 6:04 AM, Jef Vervoort wrote:
>
>> --> RV9-List message posted by: "Jef Vervoort"
>> <jef.vervoortw@telenet.be>
>>
>> Has anybody used an Edge rolling tool on the wing skins ( I bought
>> one from
>> Avery)?
>>
>> Should we roll the edges before dimpling the rivet holes?
>>
>> All 4 edges or just the 2 longer ones?
>>
>> Jef Vervoort 91031, wing skins.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: edge rolling |
--> RV9-List message posted by: Bob Kelly <mmpi@missionmedia.org>
John,
While you are right, the butt joints don't need to be rolled, they sure look
good when you do. I feel it gives the edge a little stiffness that it
wouldn't otherwise have and makes a more nearly straight joint. It worked
for me anyway.
Bob Kelly, painting
On 05/06/06, John Oliveira wrote:
> --> RV9-List message posted by: "John Oliveira" <oliveira@frontiernet.net>
>
> The only edge to roll are those that overlap. I only rolled the upper skin
> where they overlap. The skin on the spar that butts up against the tank
> skin or leading edge skin does not need to be rolled.
>
> John Oliveira
> ----- Original Message -----
> From: "Michael Schipper" <mike@learningplanet.com>
> To: <rv9-list@matronics.com>
> Sent: Friday, May 05, 2006 11:24 AM
> Subject: Re: RV9-List: edge rolling
>
>
>> --> RV9-List message posted by: Michael Schipper
>> <mike@learningplanet.com>
>>
>> Hi Jef,
>>
>> I would only roll the edges which go on the spar. The trailing edges
>> of the skins don't need to be rolled, and certainly not the sides. I
>> would roll before dimpling for sure.
>>
>> Mike Schipper
>> RV-9A - N63MS - Flying
>> www.my9a.com
>>
>>
>> On May 5, 2006, at 6:04 AM, Jef Vervoort wrote:
>>
>>> --> RV9-List message posted by: "Jef Vervoort"
>>> <jef.vervoortw@telenet.be>
>>>
>>> Has anybody used an Edge rolling tool on the wing skins ( I bought
>>> one from
>>> Avery)?
>>>
>>> Should we roll the edges before dimpling the rivet holes?
>>>
>>> All 4 edges or just the 2 longer ones?
>>>
>>> Jef Vervoort 91031, wing skins.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Regards
--
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|