---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Sun 05/07/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:35 AM - Re: edge rolling (Albert Gardner) ________________________________ Message 1 _____________________________________ Time: 12:35:45 AM PST US From: "Albert Gardner" Subject: RE: RV9-List: edge rolling --> RV9-List message posted by: "Albert Gardner" The tank skin tends to get a little "puffy" between the hold down screws and rolling the edge helps to reduce that and improves the appearance. I rolled the tank skins, empennage leading edge skins and fuse skins where they overlap and liked the result. I'm doing it again on my RV-10. Albert Gardner Yuma, AZ RV-9A flying, RV-10 in progress. -----Original Message----- --> RV9-List message posted by: "John Oliveira" The only edge to roll are those that overlap. I only rolled the upper skin where they overlap. The skin on the spar that butts up against the tank skin or leading edge skin does not need to be rolled. John Oliveira