----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Sat 05/20/06: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 03:45 PM - Aft CG  (Chenoweth)
 
 
 
________________________________  Message 1  _____________________________________


Time: 03:45:53 PM PST US
From: "Chenoweth" <chenoweth@gwi.net>
Subject: RV9-List: Aft CG

--> RV9-List message posted by: "Chenoweth" <chenoweth@gwi.net>

This is a question for any of you with a completed tailwheel 9.  I'm in 
the tail cone and mid section construction part of one and wonder about 
CG problems.  I'm hoping to use a wooden prop and worry that I'll end up 
with a very aft CG if I do.  That is leading me to wonder if ELT and 
strobe power supply placement should be other than behind bulkhead 706 
(which is where Van's strongly recommends I put them).  
Any comments and suggestions on this will be gratefully received.
Bill
Albion, Maine