Today's Message Index:
----------------------
1. 10:11 AM - joggle (Chenoweth)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
The joggles in the aft ends of 719 (the skin stiffeners that go between
firewall and carry thru) were poorly done by Van's and I can't figure
out how to fix them.
They need to be 1/8" deep to nest properly at the carry thru flange and
they are more like 1/16" deep. To compound this there is a serious
bulge made by whatever tool was used to make the joggle about 1 1/2"
forward of the end. This bulge is going to make quite a bump in the
skin if I don't do something about it.
Can any of you give me some guidance on how to fix this? About the only
thing I've come up with is to saw off the opposing leg of the angle and
then bend what's left to fit. Don't think this is such a great idea
though.
Bill
Albion, Maine
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|