---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Fri 07/28/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:11 AM - joggle (Chenoweth) ________________________________ Message 1 _____________________________________ Time: 10:11:04 AM PST US From: "Chenoweth" Subject: RV9-List: joggle The joggles in the aft ends of 719 (the skin stiffeners that go between firewall and carry thru) were poorly done by Van's and I can't figure out how to fix them. They need to be 1/8" deep to nest properly at the carry thru flange and they are more like 1/16" deep. To compound this there is a serious bulge made by whatever tool was used to make the joggle about 1 1/2" forward of the end. This bulge is going to make quite a bump in the skin if I don't do something about it. Can any of you give me some guidance on how to fix this? About the only thing I've come up with is to saw off the opposing leg of the angle and then bend what's left to fit. Don't think this is such a great idea though. Bill Albion, Maine