Today's Message Index:
----------------------
1. 08:09 AM - Re: RV9-List Digest: 1 Msgs - 09/02/06 (Larry Rush)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: RV9-List Digest: 1 Msgs - 09/02/06 |
Wayne,
Yes, I did. I made up an aluminum mount (.032 to .046") with a couple 10-32 nut
plates for the antenna center mount and riveted it to the top stab rib with four
LP4-4 rivets. The mount has a 5/8" flange in front and rear, is about 3"
long, and raises the "puck" up so the top is flush with the top edge of skin.
The cut-outs are about 1 1/2+ long on each side, and of course the fiber glass
tip needs a couple cutouts also. I also ran about a 4' long coax up thru the
vert. stab. with BNC connectors on each end so I could easily remove the stab
without re-routing the coax. You can leave the "puck" in place but remove the
two stainless antenna whiskers for painting. After paint it is almost unnoticable.
Looks great and VOR/LOC/GS receprion is as good as you'll get. I think
I have a pic in my Build Log if you want one. I'll scan it and e-mail it to you.
(built mine before digital cameras <: ).
Larry
"LIMA TANGO SENDS"
----- Original Message ----
From: RV9-List Digest Server <rv9-list@matronics.com>
Sent: Sunday, September 3, 2006 2:57:30 AM
Subject: RV9-List Digest: 1 Msgs - 09/02/06
*
=================================================
Online Versions of Today's List Digest Archive
=================================================
Today's complete RV9-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the RV9-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/rv9-list/Digest.RV9-List.2006-09-02.html
Text Version:
http://www.matronics.com/digest/rv9-list/Digest.RV9-List.2006-09-02.txt
===============================================
EMail Version of Today's List Digest Archive
===============================================
----------------------------------------------------------
RV9-List Digest Archive
---
Total Messages Posted Sat 09/02/06: 1
----------------------------------------------------------
Today's Message Index:
----------------------
1. 02:20 AM - Re: Re: RV9-List Digest: 1 Msgs - 08/29/06 (Wayne)
________________________________ Message 1 _____________________________________
Time: 02:20:05 AM PST US
From: "Wayne" <wowens@darientel.net>
Subject: Re: RV9-List: Re: RV9-List Digest: 1 Msgs - 08/29/06
The antenna base (hockey puck) I have is wider than the top of the
rudder. Did you cut a notch and let a half inch hang out on either side?
Thanks again for your time.
Wayne
----- Original Message -----
From: Larry Rush
To: rv9-list@matronics.com
Sent: Thursday, August 31, 2006 5:15 PM
Subject: RV9-List: Re: RV9-List Digest: 1 Msgs - 08/29/06
I put mine and two others on top of the vertical stab.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|