Today's Message Index:
----------------------
1. 10:16 AM - Wanted Garmin 196 or 96 (Bryan Flood)
2. 07:58 PM - Re: Brake lines (Larry Rosen)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Wanted Garmin 196 or 96 |
Hello, all you people who got a 396 or 496 for X-mas, it's time to sell me
your old Garmin 196. I finished my rv-9a in August and it's a whole lot of
fun. Unfortunately long trips by pilotage and dead reckoning are a real
hassle. I can't afford the new whiz bang do everything GPS but I do need to
move into the current era of navigation. Instead of putting the old GPS in
the baggage compartment and flying it all over the US (dead weight) sell it
to me, you know you will probably never use it again. If you want to sell me
your old 96 or 196 please contact me at:
bryanflood@hotmail.com
Thanks,
Bryan
do not archive
_________________________________________________________________
>From photos to predictions, The MSN Entertainment Guide to Golden Globes has
it all. http://tv.msn.com/tv/globes2007/?icid=nctagline1
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill,
Saw your photos here <http://www.repucci.com/bill/fuselage_pg3.html>.
Do you have any specifics on the brake lines you used? Vendor,
Manufacture, Model?
Larry Rosen
RV-10 N205EN (reserved)
Bill Repucci wrote:
>
> Good advice!
>
> Realizing the brake lines on the -9A are different than on the -9 here
> is my experience with the -9.
>
> I did not like the idea of the loop around the brake so I elected to run
> the hard line down the gear leg and transition to a 12" section of
> stainless steel flex line. Look great, easy enough to do, etc. but...
>
> The fairing would not fit over the union. So, off came those brake
> lines and they were replaced with flex lines from the firewall down to
> the brake. Much easier installation. I'll post pictures on my web site
> in a few days. Busy with work right now.
>
> Bill
>
> -----Original Message-----
> From: owner-rv9-list-server@matronics.com
> [mailto:owner-rv9-list-server@matronics.com] On Behalf Of Michael Ice
> Sent: Monday, December 11, 2006 3:07 PM
> To: rv9-list@matronics.com
> Subject: Re: RV9-List: Brake lines
>
>
>
> Wayne,
>
> If you order the brake lines now don't forget to get the firewall
> doubler plate. You will still have access to the brake/rudder pedals for
> a long time but it easier to do now. Don't rivet on the front deck until
> you are absolutely sure you don't or won't need any more access to the
> front area.
>
> Mike Ice
> RV-9 Wiring, wiring, wiring
>
> ----- Original Message -----
> From: Wayne <wowens@darientel.net>
> Date: Monday, December 11, 2006 10:45 am
> Subject: Re: RV9-List: Brake lines
> To: rv9-list@matronics.com
>
>
>>
>> Thanks all.
>> I called Vans this morning and they told me the brake lines come
>> in the
>> finishing kit . The fellow who answered my call couldn't
>> understand the
>> logic of " why the finishing kit not the fuselage kit" either. It
>> sure looks
>> like it would be easier now than after I have stacked a bunch of
>> aluminum on
>> top of the pedals.
>> ----- Original Message -----
>> From: "John Castor" <rjcastor@knology.net>
>> To: <rv9-list@matronics.com>
>> Sent: Monday, December 11, 2006 9:41 AM
>> Subject: Re: RV9-List: Brake lines
>>
>>
>>
>>>
>>> Wayne,
>>> I'm at the same placeinstalling brake lines. I have no part
>>>
>> labeled VA 188
>>
>>> but do have a VA 118 which came with the finish kit. These lines
>>>
>> go from
>>
>>> pedals to firewall connection. My plans also call for aluminum
>>>
>> tube from
>>
>>> gear mount to wheel brake. I have considered flexible for this
>>>
>> connection.> John Castor
>>
>>> ----- Original Message -----
>>> From: <dthomas773@sbcglobal.net>
>>> To: <rv9-list@matronics.com>
>>> Sent: Sunday, December 10, 2006 9:11 PM
>>> Subject: Re: RV9-List: Brake lines
>>>
>>>
>>>
>>>>
>>>> Hi Wayne,
>>>> Unless they have changed, flexible brake lines are not provivded.
>>>> The instructions will tell you ( at least mine did )that you use
>>>> 1/4 inch aluminum tube and create a half loop at the end and then
>>>> hook it directly to the brake. I had a local shop fabricate
>>>> 18 inch flex lines.
>>>>
>>>> Dennis Thomas
>>>> --- Wayne <wowens@darientel.net> wrote:
>>>>
>>>>
>>>>> My quick build RV9A kit appears to be short two flexible brake
>>>>> lines (VA188). Do those come with the finishing kit instead?
>>>>>
>>>>> Thanks for the guidance on the fuel return system everyone.
>>>>> Wayne
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>> 12/09/2006
>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|