Today's Message Index:
----------------------
1. 04:54 AM - Re: Wiring conduit and lower skin riveting - RV-9 Wings (Peter Laurence)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wiring conduit and lower skin riveting - RV-9 Wings |
Place the tube first. Then rivet. it's no big deal to get around the
tube.Also, you might want to place a dab of proseal around the tubing at
each rib.
Peter Laurence
----- Original Message -----
From: "Darryl Husk" <dhusk@webxetra.com>
Sent: Monday, November 19, 2007 2:19 PM
Subject: RE: RV9-List: Wiring conduit and lower skin riveting - RV-9 Wings
>
> I ran the tube first, than riveted skins. I'm sure it is much easier to
> work around the tube when riveting than to try and pull the tube later.
>
> Darryl Husk
> RV-9A Redford, MI
> Do not archive
>
> -----Original Message-----
> From: owner-rv9-list-server@matronics.com
> [mailto:owner-rv9-list-server@matronics.com] On Behalf Of
> dfischer@iserv.net
> Sent: Monday, November 19, 2007 1:24 PM
> To: rv9-list@matronics.com; rv-list@matronics.com
> Subject: RV9-List: Wiring conduit and lower skin riveting - RV-9 Wings
>
>
> I'm about to do one of two things - rivet the lower wing skins, or run the
> corregated plastic wiring conduit though the wing ribs. Any advice as to
> the preferred order? Running the conduit after the lower skin is on looks
> like a mjor pain, but working around the conduit during riveting looks to
> be troublesome as well. The tubing will be running through holes I
> drilled towards the bottom of the ribs in the web below and centered
> between two lightening holes. Thanks in advance for any help!
>
> Doug Fischer
> RV-9A Jenison, MI Sloooooowwww-Build
> do not archive
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|