----------------------------------------------------------
                           RVCanada-List Digest Archive
                                      ---
                     Total Messages Posted Fri 06/03/05: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:19 AM - Re: Inspection  (Franz Fux)
     2. 09:39 AM - Re: Inspection  (Tom and Marilyn Law)
     3. 11:45 AM - Saskatoon visits  (Jim Jewell)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:19:00 AM PST US
From: "Franz Fux" <franz@lastfrontierheli.com>
Subject: RE: RVCanada-List: Inspection

--> RVCanada-List message posted by: "Franz Fux" <franz@lastfrontierheli.com>

I would suggest that you leave on side of the skin open on all the parts to
have access to all the rivets for inspection
Franz
RV7A
Vernon, BC

-----Original Message-----
From: owner-rvcanada-list-server@matronics.com
[mailto:owner-rvcanada-list-server@matronics.com]On Behalf Of Wayne
Subject: RVCanada-List: Inspection


--> RVCanada-List message posted by: "Wayne" <wlm@cogeco.ca>

I'm just getting ready to start riveting my horizontal stabilizer together,
and am unsure how much I need to leave open for the MDRA  precover
inspection.
I'd like to finish as much as possible.
Can anybody share their wisdom on this?
Also the rest of the empennage parts?

Thanks

Wayne
RV 7A


--

--






________________________________  Message 2  _____________________________________


Time: 09:39:47 AM PST US
From: "Tom and Marilyn Law" <tlaw@klondiker.com>
Subject: Re: RVCanada-List: Inspection

--> RVCanada-List message posted by: "Tom and Marilyn Law" <tlaw@klondiker.com>

Transport Canada did my Inspection With the all the skins riveted on one
side and open on the other side  only enough to look inside and see all the
rivets.  All went well.

Tom Law, Whitehorse    RV6A

> I'm just getting ready to start riveting my horizontal stabilizer
together,
> and am unsure how much I need to leave open for the MDRA  precover
> inspection.
> I'd like to finish as much as possible.
> Can anybody share their wisdom on this?
> Also the rest of the empennage parts?
>
> Thanks
>
> Wayne
> RV 7A
>
>
> --
>
> --
>
>






________________________________  Message 3  _____________________________________


Time: 11:45:57 AM PST US
From: "Jim Jewell" <jjewell@telus.net>
Subject: RVCanada-List: Saskatoon visits

--> RVCanada-List message posted by: "Jim Jewell" <jjewell@telus.net>

Hello Saskatchewan,

I will be making a number of short term visits (flying commercial) to 
Saskatoon over the next several months to visit with my wife who will be in 
Saskatoon on a job contract there.
I am currently operating under the impression (misguided or not) that my 
RV6-eh will be flight worthy later in the summer. However it is doubtful 
that I will be flight worthy by then {[;-).

My wife is considering doing the ground school portion of her flight 
training while working in Saskatoon and would appreciate any information in 
that regard.

I expect to be seen lurking around the airport when time permits and I would 
like to meet any Homebuilders, owners and flyers who live in the general 
area.
I am willing to buck or drive some rivets or pitch in with what have you in 
return for coffee and conversation if time during visits to Saskatoon 
permits.

Jim in Kelowna