---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Mon 09/13/04: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:01 AM - Re: photos (SportAV8R@aol.com) 2. 07:32 AM - Re: photos (Wayne Williams) 3. 07:45 AM - Re: photos (Larry Bowen) 4. 08:08 AM - Re: photos (BOB martin) 5. 11:25 AM - (steve zicree) 6. 02:03 PM - Re: photos (SportAV8R@aol.com) 7. 03:40 PM - Re: (Paul D. Franzon) 8. 04:17 PM - Re: photos (Steve Glasgow) 9. 08:34 PM - FW: Fuel Injection Classes (Larry Bowen) 10. 08:45 PM - Re: photos (SportAV8R@aol.com) ________________________________ Message 1 _____________________________________ Time: 07:01:23 AM PST US From: SportAV8R@aol.com Subject: RE: RVSouthEast-List: photos --> RVSouthEast-List message posted by: SportAV8R@aol.com Way to go, Larry! Congratulations!!! (You let that chase plane come in mighty close on a first flight; slap the other pilot for me.) -Stormy ________________________________ Message 2 _____________________________________ Time: 07:32:04 AM PST US From: "Wayne Williams" Subject: RE: RVSouthEast-List: photos --> RVSouthEast-List message posted by: "Wayne Williams" Stormy: You should see Radomir's zoom lenses! Wayne -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com]On Behalf Of SportAV8R@aol.com Subject: RE: RVSouthEast-List: photos --> RVSouthEast-List message posted by: SportAV8R@aol.com Way to go, Larry! Congratulations!!! (You let that chase plane come in mighty close on a first flight; slap the other pilot for me.) -Stormy ________________________________ Message 3 _____________________________________ Time: 07:45:55 AM PST US Subject: RE: RVSouthEast-List: photos From: "Larry Bowen" --> RVSouthEast-List message posted by: "Larry Bowen" Thanks. He wasn't that close. Radomir has a 4 foot lense on his camera. It barely fit in Wayne's plane!! He takes a good picture, doesn't he? I think he should be the official SERV Photo Journalist Dude. So he needs a call sign like f-stop, or appeture, or something........ - Larry Bowen Larry@BowenAero.com http://BowenAero.com SportAV8R@aol.com said: > --> RVSouthEast-List message posted by: SportAV8R@aol.com > > Way to go, Larry! > > Congratulations!!! > > (You let that chase plane come in mighty close on a first flight; slap the > other pilot for me.) > > -Stormy > > ________________________________ Message 4 _____________________________________ Time: 08:08:18 AM PST US From: "BOB martin" Subject: RE: RVSouthEast-List: photos --> RVSouthEast-List message posted by: "BOB martin" I always tell people I'm using a ZOOM lense when I show them flying pics... Just like I always say Gaggle instead of Formation flying..... and well gaggle is true, cause I'm not a formation pilot yet....and I wouldn't want to mislead any newbie RV guys into thinking it is not as extreamly hard as it is....... Larry......big Congrats on the First Flight...way to go!!! fantastic plane! And the flying pics are top notch....I enjoyed seeing them very much!!! Bob Martin, Louisa VA. >From: "Larry Bowen" >Reply-To: rvsoutheast-list@matronics.com >To: rvsoutheast-list@matronics.com >Subject: RE: RVSouthEast-List: photos >Date: Mon, 13 Sep 2004 10:45:47 -0400 (EDT) > >--> RVSouthEast-List message posted by: "Larry Bowen" > >Thanks. > >He wasn't that close. Radomir has a 4 foot lense on his camera. It >barely fit in Wayne's plane!! He takes a good picture, doesn't he? I >think he should be the official SERV Photo Journalist Dude. So he needs a >call sign like f-stop, or appeture, or something........ > >- >Larry Bowen >Larry@BowenAero.com >http://BowenAero.com > >SportAV8R@aol.com said: > > --> RVSouthEast-List message posted by: SportAV8R@aol.com > > > > Way to go, Larry! > > > > Congratulations!!! > > > > (You let that chase plane come in mighty close on a first flight; slap >the > > other pilot for me.) > > > > -Stormy > > > > > > ________________________________ Message 5 _____________________________________ Time: 11:25:03 AM PST US From: "steve zicree" Subject: RVSouthEast-List: 1.16 MISSING_SUBJECT Missing Subject: header --> RVSouthEast-List message posted by: "steve zicree" Does anybody have any first hand experience scratch-building seats for an RV4? I'm trying to figure out whether I'm supposed to just make big thick cushions for the bottoms or build up some type of pedestal. Any good recommendations regarding types of foam would also be helpful. Steve Zicree RV4, Waiting for finishing kit ________________________________ Message 6 _____________________________________ Time: 02:03:28 PM PST US From: SportAV8R@aol.com Subject: RE: RVSouthEast-List: photos --> RVSouthEast-List message posted by: SportAV8R@aol.com I knew there was some safe explanation. Carry on. "F-stop," indeed. I shutter to think what call sign Radomir might get shackled with. -Stormy ________________________________ Message 7 _____________________________________ Time: 03:40:25 PM PST US From: "Paul D. Franzon" Subject: RE: RVSouthEast-List: --> RVSouthEast-List message posted by: "Paul D. Franzon" I scratched built the cushions for my RV-4. The builder had installed some thick slab cushions that were very uncomfortable. It took me two days to recover after flying the plane back from CA :-) And the backseat was even worse! I made the seat back cushions out of 1" thick high density foam to give more leg room. I added lumbar support to the backs. I custom shaped the bottoms to give better thigh and butt support, using high density foam. I added a layer of comfor foam (aka memory foam or temper foam) in the front and intend to add it in the back. I designed the back cushions so that people with different trunk heights can see out the window while not hit their head on the roof. (The tallest people need to be almost on the floor.) And don't forget to pad the rear canopy support bar. Now, myself and my passenger can sit in the plane pain free for 4+ hours (I have tip tanks). I must admit I've been told it would be more correct from a crash perspective to use Styrofoam instead of high density foam for the base (with 3" of temper foam on top). I would be happy to show this to you and talk further. Paul D. Franzon -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of steve zicree Subject: RVSouthEast-List: --> RVSouthEast-List message posted by: "steve zicree" Does anybody have any first hand experience scratch-building seats for an RV4? I'm trying to figure out whether I'm supposed to just make big thick cushions for the bottoms or build up some type of pedestal. Any good recommendations regarding types of foam would also be helpful. Steve Zicree RV4, Waiting for finishing kit ________________________________ Message 8 _____________________________________ Time: 04:17:29 PM PST US From: "Steve Glasgow" Subject: Re: RVSouthEast-List: photos --> RVSouthEast-List message posted by: "Steve Glasgow" Way to go Larry! Now you can enjoy the fruits of your labor. Steve Glasgow ----- Original Message ----- From: "Larry Bowen" Subject: RE: RVSouthEast-List: photos > --> RVSouthEast-List message posted by: "Larry Bowen" > > Yes, today was the big day! I put 0.8 hours on N130WN...actually in the air > this time. I did one landing at EXX and another at 8A7. All went well, and > I am sporting a big RV grin! > > Thanks to Wayne8A and Radomir in the chase plane and Wayne8 and Pam on the > ground!! > > - > Larry Bowen > Larry@BowenAero.com > http://BowenAero.com > > > > -----Original Message----- > > From: Radomir Zaric [mailto:vitez@carolina.rr.com] > > Sent: Saturday, September 11, 2004 3:14 PM > > To: rvsoutheast-list@matronics.com > > Subject: RVSouthEast-List: photos > > > > --> RVSouthEast-List message posted by: "Radomir Zaric" > > --> > > > > They're coming up on Larry's site as well, but in the > > meantime, here are a few pics from today: > > > > > > http://www.vitez.net/larry/ > > > > > > Congrats! :-) > > > > > > Radomir > > ________________________________ Message 9 _____________________________________ Time: 08:34:41 PM PST US From: "Larry Bowen" Subject: RVSouthEast-List: FW: Fuel Injection Classes --> RVSouthEast-List message posted by: "Larry Bowen" FYI - Larry Bowen Larry@BowenAero.com http://BowenAero.com _____ From: Airflow Performance [mailto:airflow2@bellsouth.net] Subject: Fuel Injection Classes Hi, to all the Southeast RV flyers and builders out there. We at Airflow Performance are now offering a class on Fuel injection, systems and installation. It will be held on at our facility at the Spartanburg, SC downtown airport (SPA). Class schedule will be Nov 12-14 this year, and are scheduled for Feb 18-20, and April 1-3 of '05. If you have PowerPoint on your computer go to our web site at www.airflowperformance.com and click on Fuel Injection 101 classes. If you don't have this software, you can call and we'll mail you the information on these seminars. Thanks Don Rivera Airflow Performance, Inc. 864-576-4512 ________________________________ Message 10 ____________________________________ Time: 08:45:41 PM PST US From: SportAV8R@aol.com Subject: Re: RVSouthEast-List: photos --> RVSouthEast-List message posted by: SportAV8R@aol.com Glass-smooth day or gyro-stabilized steadi-cam? I can't get air-to-air shots that crisp with a point-n-shoot zoomed out at 1/250 most days :-) -Stormy >>Thanks to Wayne8A and Radomir in the chase plane and Wayne8 and Pam on the ground!!<<