RVSouthEast-List Digest Archive

Mon 06/13/05


Total Messages Posted: 3



Today's Message Index:
----------------------
 
     1. 07:35 AM - Re: Lightspeed EI Problem (Ken Harrill)
     2. 09:07 AM - Re: Lightspeed EI Problem  (sportav8r@aol.com)
     3. 04:28 PM - $10 coupon (Larry Bowen)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:35:55 AM PST US
    From: Ken Harrill <rkharr@gmail.com>
    Subject: Re: Lightspeed EI Problem
    --> RVSouthEast-List message posted by: Ken Harrill <rkharr@gmail.com> Len, Have you checked your power and ground wiring? An intermittent interruption in power to the unit could cause those symptoms. If you want to borrow my Plasma II unit to trouble shoot the problem, you are welcome to it. I don't need it right now. #%@#*%&###. Ken On ,6/12/05, Lenleg@aol.com <Lenleg@aol.com> wrote: > --> RVSouthEast-List message posted by: Lenleg@aol.com > > Guys: > > Need you help on troubleshooting a problem on my Lightspeed. I have 355 > hours on my 8A and the problems started surfacing about 50 hours ago. I started > chasing the problem but was looking in the wrong direction. > > RPM gauge on my Rky Mtn uMonitor was all over the place ... giving me all > sorts of varying numbers when the plane got warmed up ... talked with Rky Mtn > ... checked wiring and finally rewired the plug. Nothing changed ... > > At this same time ... noticed that the CHTs were indicating hotter than > normal ... no explanation ... thought that was the uMonitor also. > > On runups the lighspeed seem to be a little rough but not so much that you > would not fly .. in fact ... I wondered if the rough was my imagination. The > the last couple of starts on the lighstpeed the prop stopped very quckly > after a half turn or so ... now I knew there was something going on here ... > thought it might be timing ... but that checked out dead on. > > Then yesterday the Lightspeed failed completely on runup ...my rpm gauge is > connected only to the Lightspeed and not the mag on the other side ...SO it > turns out all this time with the rpm varying ... was not the gauge but the > Lightspeed .... > > I have the cowl off ... checked wiring ... nothing wrong ... checked timing > ... good ....?????? > > Klaus is out of his office until June 28 ... so I am down for a month . > HELP !!!! > > Len Leggette, RV-8A > Greensboro, NC N910LL > 358 hrs > > > > > > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:07:28 AM PST US
    From: sportav8r@aol.com
    Subject: Re: Lightspeed EI Problem
    --> RVSouthEast-List message posted by: sportav8r@aol.com Allow me to add that I'd come down this weekend to help you work on your ignition, but I'm going to be tied up with my son's wedding Saturday, and thereafter with getting ready for hosting June 25th. You'll get through without me somehow... Heads up for all SERV pilots: in my quest for some food that won't require me to spend the whole time at the grill with my back to my guests like last year, I am looking at buying a vat of BBQ from the Homestead Resort. Had some of this at a wedding last month and it was wonderful!!! Don't forget that the river is warm and full now, perfect for tubing. Ask Dean and Jeanine Meylor about that. You guys thast came last summer and didn't stay to float the river missed a treat. It's gonna be great. Even if Len has to arrive as GIB :-) -Stormy -----Original Message----- From: sportav8r@aol.com Subject: Re: RVSouthEast-List: Lightspeed EI Problem --> RVSouthEast-List message posted by: sportav8r@aol.com Klaus is out of his office until June 28 ... so I am down for a month . HELP !!!! Len Leggette, RV-8A Greensboro, NC N910LL 358 hrs Oh, no you don't! You can't miss Stormy's Fly-In for a wimpy little ignition problem. (And you better not go to Lake Norman Airpark that day, either ;-) Fix it, Leggs! -Stormy


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:28:13 PM PST US
    From: "Larry Bowen" <Larry@bowenaero.com>
    Subject: $10 coupon
    --> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com> FYI - Coupon code "10DAD" is good for $10 off a $30 order at caf press, which is where you can order a SERV shirt or mug. Offer expires 6/14. Sorry for the short notice. More details here: http://www.cafepress.com/serv We've personally ordered the long sleeve t-shirt and golf shirt, and the quality is good. The golf shirt is not as nice as the ones Len acquired for us previously as the decal is ink, not embroidered. I like the t-shirt, the long sleeves are good while flying my airborne tanning booth. Cheers, - Larry Bowen, RV-8, 99 hours, down for prop repairs. Larry@BowenAero.com http://BowenAero.com Do not archive




    Other Matronics Email List Services

  • Post A New Message
  •   rvsoutheast-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RVSouthEast-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rvsoutheast-list
  • Browse RVSouthEast-List Digests
  •   http://www.matronics.com/digest/rvsoutheast-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --