----------------------------------------------------------
                           RVSouthEast-List Digest Archive
                                      ---
                     Total Messages Posted Sat 07/30/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:58 AM - SBS RV Throttle Quadrant Installation  (Bill Repucci)
     2. 03:57 PM - Re: SBS RV Throttle Quadrant Installation  (Bill Repucci)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:58:24 AM PST US
From: "Bill Repucci" <bill@repucci.com>
Subject: RVSouthEast-List: SBS RV Throttle Quadrant Installation

--> RVSouthEast-List message posted by: "Bill Repucci" <bill@repucci.com>

I'm building an RV-9 and have purchased a throttle quadrant from
Aircraft Spruce and was wondering if any of you with -6/-7/-9's have
done likewise.  If so, how did you attach the quadrant?

Attached is a rough drawing done in MS Word detailing how I think I will
attach the quadrant to my panel.

I'm installing an "Affordable Panel", which includes a sub-frame and a
panel overlay.  The aft end of the aluminum angle will be riveted to the
sub-panel.

Pictures of the panel and throttle quadrant can be seen at the bottom of
panel page of my web site, http://www.repucci.com/bill/instruments.html.

Let me know if you have any questions and thanks for all of your help.

Bill
RV-9
Fuselage.


-----Original Message-----
From: Radomir Zaric [mailto:vitez@carolina.rr.com] 
Subject: Andair


I just got my Andair valve in mail.. looks awesome.. absolutely
beautiful.


Radomir






________________________________  Message 2  _____________________________________


Time: 03:57:25 PM PST US
From: "Bill Repucci" <bill@repucci.com>
Subject: RE: RVSouthEast-List: SBS RV Throttle Quadrant Installation

--> RVSouthEast-List message posted by: "Bill Repucci" <bill@repucci.com>

Radomir just reminded me that the list server strips attachments.  I've
included the drawing at the bottom of the web page I listed in the
original email.  (http://www.repucci.com/bill/instruments.html)

Bill


-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill
Repucci
Subject: RVSouthEast-List: SBS RV Throttle Quadrant Installation


--> RVSouthEast-List message posted by: "Bill Repucci" 
--> <bill@repucci.com>

I'm building an RV-9 and have purchased a throttle quadrant from
Aircraft Spruce and was wondering if any of you with -6/-7/-9's have
done likewise.  If so, how did you attach the quadrant?

Attached is a rough drawing done in MS Word detailing how I think I will
attach the quadrant to my panel.

I'm installing an "Affordable Panel", which includes a sub-frame and a
panel overlay.  The aft end of the aluminum angle will be riveted to the
sub-panel.

Pictures of the panel and throttle quadrant can be seen at the bottom of
panel page of my web site, http://www.repucci.com/bill/instruments.html.

Let me know if you have any questions and thanks for all of your help.

Bill
RV-9
Fuselage.


-----Original Message-----
From: Radomir Zaric [mailto:vitez@carolina.rr.com] 
Subject: Andair


I just got my Andair valve in mail.. looks awesome.. absolutely
beautiful.


Radomir