Today's Message Index:
----------------------
1. 03:57 AM - Re: RV6A (Marcus Cooper)
2. 05:38 AM - Prop (Ron and Shannon AWAD)
3. 06:08 AM - Re: Prop (bill crothers)
4. 06:11 AM - Re: Gap (Scott Tanner)
5. 07:09 AM - Re: Prop (Ron and Shannon AWAD)
6. 07:16 AM - Re: Gap (Lenleg@aol.com)
7. 07:18 AM - Re: Prop (Lenleg@aol.com)
8. 07:37 AM - Kennebec FlyIn (Paul D. Franzon)
9. 07:44 AM - Re: Surging (Paul D. Franzon)
10. 09:31 AM - Re: JetBlue (Speedy11@aol.com)
11. 04:35 PM - Re: Gap (Larry Bowen)
12. 06:05 PM - Re: Prop (Ron and Shannon AWAD)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Marcus Cooper" <coop85@bellsouth.net>
Steve,
The landing gear are different, but the change is probably fairly
straight forward. On the taildragger, the main gear are attached to the
engine mount instead of to braces on the spar. You'll have to remove the
main mounts (to save weight, probably wouldn't hurt to leave them there
otherwise) and get a new engine mount which you'd probably planned on anyway
due to the O-320. The Tailwheel bracket is a pre-made steel unit that is
attached to the rear bulkhead but you'll probably be able to get all the
access you need through the top after removing the horizontal stab.
Good luck,
Marcus
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
FIXERJONES@aol.com
Subject: RVSouthEast-List: RV6A
--> RVSouthEast-List message posted by: FIXERJONES@aol.com
hello netter's, i'm steve jones in venice fl. being new to the rv list. i
hope this is for builders since i'm starting to rebuild an RV 6 A wreck i
picked
up. sorted out the new tail kit tonite & gettin ready to build. i wonder if
the 6-A main gear legs are the same as the tail dragger ?since i want to
convert it. i'll have the belly skins off to add whatever holds the
tailweel
in place. it came with a chevy vortec v6 firewall forward which i'm gonna
sell, i want a
0320 for power & turbo it. by the way i'm currently flying my homebuilt
KR2
N212KR i built powered with a turbo corvair eng. there's a 9 page story
on it in sport avaition may,05
so i'm excited to work with metal instead of composit & always have liked
the RV "s
now's my chance to build & fly my own :-) hope these huricanes go away,
cuttin into my flyin,,,steve jones
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Ron and Shannon AWAD" <sawad13@msn.com>
No one has a spare prop they can loan out or rent to me for testing
purposes???
Ron Awad
Dont just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
I just got my sensenich back from overhaul...you can
use my Warnke once I get back fr. beach...bill
--- Ron and Shannon AWAD <sawad13@msn.com> wrote:
> --> RVSouthEast-List message posted by: "Ron and
> Shannon AWAD" <sawad13@msn.com>
>
>
> No one has a spare prop they can loan out or rent to
> me for testing
> purposes???
>
>
> Ron Awad
>
> Dont just search. Find. Check out the new MSN
> Search!
>
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>
>
>
> browse
> Subscriptions page,
> FAQ,
>
>
>
>
>
>
__________________________________
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Scott Tanner" <tannerav8@earthlink.net>
Larry,
Champion recomends .018 to .022. They sell a gauge for this purpose Aircraft
Spruce P/N CT-450 with the two sizes necessary, but any wire gauge will
work.
Scott
----- Original Message -----
From: "Larry Bowen" <Larry@bowenaero.com>
Subject: RVSouthEast-List: Gap
> --> RVSouthEast-List message posted by: "Larry Bowen"
> <Larry@BowenAero.com>
>
> Where can I find a reference for gapping spark plugs? IE, what is the
> correct gap distance?
>
> -
> Larry Bowen
> Larry@BowenAero.com
> http://BowenAero.com
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Ron and Shannon AWAD" <sawad13@msn.com>
Thanks Bill.
Ron Awad
>From: bill crothers <bill28104@yahoo.com>
>Reply-To: rvsoutheast-list@matronics.com
>To: rvsoutheast-list@matronics.com
>Subject: Re: RVSouthEast-List: Prop
>Date: Fri, 23 Sep 2005 06:08:12 -0700 (PDT)
>
>--> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
>
>I just got my sensenich back from overhaul...you can
>use my Warnke once I get back fr. beach...bill
>
>--- Ron and Shannon AWAD <sawad13@msn.com> wrote:
>
> > --> RVSouthEast-List message posted by: "Ron and
> > Shannon AWAD" <sawad13@msn.com>
> >
> >
> > No one has a spare prop they can loan out or rent to
> > me for testing
> > purposes???
> >
> >
> > Ron Awad
> >
> > Dont just search. Find. Check out the new MSN
> > Search!
> >
>http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> >
> >
> >
> > browse
> > Subscriptions page,
> > FAQ,
> >
> >
> >
> >
> >
> >
>
>
>__________________________________
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: Lenleg@aol.com
In a message dated 9/22/2005 11:54:54 PM Eastern Standard Time,
Larry@bowenaero.com writes:
Where can I find a reference for gapping spark plugs? IE, what is the
correct gap distance?
-
Larry Bowen
Bob Barrows put it in my engine log book.
Len
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: Lenleg@aol.com
In a message dated 9/23/2005 8:39:25 AM Eastern Standard Time,
sawad13@msn.com writes:
No one has a spare prop they can loan out or rent to me for testing
purposes???
Ron Awad
Wayne8 has a 3 blade Cato he is trying to sell.
Len
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Paul D. Franzon" <paulf@ncsu.edu>
Kennebec's Fall fly-in will be held on October 1 (Saturday week) starting at
around 11 am. There will be a lunch purchasable on the field, and most
likely ice-cream. Apparently the Spring event had a good turn out and was
quite fun.
For once, I don't have business travel so I hope to see some of you. We
could do some formation practice after if you are interested.
Airport information can be found at http://www.airnav.com/airport/78NC
By ground, it is just between Fuquay Varina and Angier, along side NC 55.
Hope to see some of you there.
Paul D. Franzon
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Paul D. Franzon" <paulf@ncsu.edu>
This summer I've been noticing a very surging in my engine rpm (about +/- 20
rpm) when close to idle after flying (e.g. in the pattern or on the ground
after landing). It does not always happen (even on the same flight) but I
wonder it's a high temperature thing. (Since we've had no cool temps for a
while, I can't really test that.) I have a fuel injected IO-360 and it
happens even if the boost pump is on (my boost pump is in the cockpit). All
the fuel hoses are fire sleaved. I have a couple of cooling blast tubes
going behind the engine, one to the mag, one just there.
Any suggestions, please?
Paul D. Franzon
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: Speedy11@aol.com
In a message dated 09/23/05 2:57:59 AM Eastern Standard Time,
rvsoutheast-list-digest@matronics.com writes:
Still, I was impressed with the precision of the rollout, and
the apparent poor braking action on a foamed runway.
Very precise landing - but there was no foam.
It appeared to me that the pilot didn't use thrust reversers, ground
spoilers, or brakes. He simply let the energy dissipate along the length of the
runway to avoid putting downward pressure on the nose strut.
Stan Sutterfield
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
Thanks for all the replies!!
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com] On
> Behalf Of rlarv6@juno.com
> Sent: Friday, September 23, 2005 2:48 AM
> To: rvsoutheast-list@matronics.com
> Subject: Re: RVSouthEast-List: Gap
>
> --> RVSouthEast-List message posted by: "rlarv6@juno.com"
> --> <rlarv6@juno.com>
>
> Good Question! I found a reference to "The standard Gap"
> under "Spark Plug Gapping Tools" in the Aircraft Spruce Catalog.
> Ron Archer
>
>
> Good Question! I found a reference to "The standard Gap"
> under "Spark Plug Gapping Tools" in the Aircraft Spruce Catalog.
>
>
> Ron Archer
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Ron and Shannon AWAD" <sawad13@msn.com>
How much and does he have a spinner for it? I just want to try a different
prop to see if that is the source of my viberations, if it is then what ever
I borrow I would probably want buy.
Ron Awad
>From: Lenleg@aol.com
>Reply-To: rvsoutheast-list@matronics.com
>To: rvsoutheast-list@matronics.com
>Subject: Re: RVSouthEast-List: Prop
>Date: Fri, 23 Sep 2005 10:17:59 EDT
>
>--> RVSouthEast-List message posted by: Lenleg@aol.com
>
>
>In a message dated 9/23/2005 8:39:25 AM Eastern Standard Time,
>sawad13@msn.com writes:
>
>No one has a spare prop they can loan out or rent to me for testing
>purposes???
>
>
>Ron Awad
>
>
>Wayne8 has a 3 blade Cato he is trying to sell.
>
>Len
>
>
Dont just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|