---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Sat 11/26/05: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:37 AM - The List of Contributors Coming Soon - Make Sure You're Listed! (Matt Dralle) 2. 01:47 PM - Re: RV9AQB for salexx SOLD (Wayne Williams) 3. 02:03 PM - Today (Steve Glasgow) 4. 04:29 PM - Re: Re: RV9AQB for salexx SOLD (Larry Bowen) 5. 05:31 PM - EIS Leaning (Larry Bowen) 6. 05:40 PM - Re: Re: RV9AQB for salexx SOLD (Lenleg@aol.com) 7. 06:03 PM - Re: EIS Leaning (Steve Glasgow) 8. 07:59 PM - Re: EIS Leaning (Larry Bowen) ________________________________ Message 1 _____________________________________ Time: 09:37:19 AM PST US From: Matt Dralle Subject: RVSouthEast-List: The List of Contributors Coming Soon - Make Sure You're Listed! --> RVSouthEast-List message posted by: Matt Dralle Hi Listers, The List of Contributors (LOC) is just around the corner! On December 1st I post a list of everyone that so generously made a Contribution to support the Lists. Its sort of my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Won't you take a moment and assure that your name is on that List of Contributors? As a number of people have pointed out, the List seems at least, if not a whole lot more, as valuable as a building/flying/recreating tool as a typical your magazine subscription. We won't even talk about a newsstand price... :-) Won't you take minute and assure that your name is on the upcoming LOC? Tell others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Visa or M/C on the SSL Secure Web Site: http://www.matronics.com/contribution or by popping a personal check in the mail to: Matronics Email Lists c/o Matt Dralle PO Box 347 Livermore CA 94551-0347 I would like to thank everyone that has so generously made a Contribution thus far in this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists going and improving! Don't forget to include a little comment about how the Lists have helped you! I love to feel the love... :-) Best regards, Matt Dralle Email List Administrator Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft do not archive ________________________________ Message 2 _____________________________________ Time: 01:47:02 PM PST US From: "Wayne Williams" Subject: RVSouthEast-List: RE: RV9AQB for salexx SOLD --> RVSouthEast-List message posted by: "Wayne Williams" Sold the RV9A kit today! Thanks to everyone that expressed an interest. Wayne -----Original Message----- From: Wayne Williams [mailto:rwayne@gamewood.net] Subject: RV9AQB for sale Sometimes plans change... I've decided to sell my RV9A QB kit and focus more on flying the 8A. I have everything needed from Vans and all the accessories. The tail and wings are completed including tips and electrical. The inside of the fuse is painted and the firewall is done. Sport AOA installed as well as roll and pitch Trutrak servos. Asking $34,000 which is parts only and much less than I have in it. (You will only need seats, engine and instruments.) Wayne Williams Danville, VA rwayne@gamewood.net -- -- ________________________________ Message 3 _____________________________________ Time: 02:03:20 PM PST US From: "Steve Glasgow" Subject: RVSouthEast-List: Today --> RVSouthEast-List message posted by: "Steve Glasgow" Randy and I really enjoyed our outing today. We met Larry B. and Dean M. at Rutherford for lunch. Dean suggested we fly to Shiflet Field (9a9). Man what a nice grass airport and nice people. They were actually glad to see us. It was like going back in the past, aviation the way it was meant to be, beautiful area also. Anyway we are all invited to fly-in any time and Gene Padgett who restores Navion's will take us all to town for lunch. He will also give demonstration rides in the Navion. Cappy ________________________________ Message 4 _____________________________________ Time: 04:29:44 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: RE: RV9AQB for salexx SOLD --> RVSouthEast-List message posted by: "Larry Bowen" Congrats. Sold to anyone we might know? - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: Wayne Williams [mailto:rwayne@gamewood.net] > Sent: Saturday, November 26, 2005 4:47 PM > To: rvsoutheast-list@matronics.com > Subject: RVSouthEast-List: RE: RV9AQB for salexx SOLD > > --> RVSouthEast-List message posted by: "Wayne Williams" > --> > > Sold the RV9A kit today! Thanks to everyone that expressed > an interest. > > Wayne > > > -----Original Message----- > From: Wayne Williams [mailto:rwayne@gamewood.net] > To: 'rvsoutheast-list@matronics.com' > Subject: RV9AQB for sale > > Sometimes plans change... > I've decided to sell my RV9A QB kit and focus more on flying > the 8A. I have everything needed from Vans and all the > accessories. The tail and wings are completed including tips > and electrical. The inside of the fuse is painted and the > firewall is done. Sport AOA installed as well as roll and > pitch Trutrak servos. Asking $34,000 which is parts only and > much less than I have in it. (You will only need seats, > engine and instruments.) > > Wayne Williams > Danville, VA > > rwayne@gamewood.net > > > -- > > > -- > > > Photoshare, and much much more: > > > > > > ________________________________ Message 5 _____________________________________ Time: 05:31:38 PM PST US From: "Larry Bowen" Subject: RVSouthEast-List: EIS Leaning --> RVSouthEast-List message posted by: "Larry Bowen" I know a couple of you guys have the EIS engine monitor in your planes. Do you rely on the "digital leaning pages"? I've had those pages disabled so far. Thinking of trying them.... http://www.grtavionics.com/leanpage.htm - Larry Bowen Larry@BowenAero.com http://BowenAero.com ________________________________ Message 6 _____________________________________ Time: 05:40:01 PM PST US From: Lenleg@aol.com Subject: Re: RVSouthEast-List: RE: RV9AQB for salexx SOLD --> RVSouthEast-List message posted by: Lenleg@aol.com In a message dated 11/26/2005 4:47:38 P.M. Eastern Standard Time, rwayne@gamewood.net writes: Sold the RV9A kit today! Thanks to everyone that expressed an interest. Wayne Who bought it and when are they picking it up ??? Len ________________________________ Message 7 _____________________________________ Time: 06:03:06 PM PST US From: "Steve Glasgow" Subject: Re: RVSouthEast-List: EIS Leaning --> RVSouthEast-List message posted by: "Steve Glasgow" I have tried them without much success. I believe they would work better with a fuel injected engine than aspirated. I just lean till highest EGT peaks or running rough and then richen 50 degrees. Somewhere around 1380 on mine. Cappy ----- Original Message ----- From: "Larry Bowen" Subject: RVSouthEast-List: EIS Leaning > --> RVSouthEast-List message posted by: "Larry Bowen" > > > I know a couple of you guys have the EIS engine monitor in your planes. > Do > you rely on the "digital leaning pages"? I've had those pages disabled so > far. Thinking of trying them.... > > http://www.grtavionics.com/leanpage.htm > > - > Larry Bowen > Larry@BowenAero.com > http://BowenAero.com > > > ________________________________ Message 8 _____________________________________ Time: 07:59:47 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: EIS Leaning --> RVSouthEast-List message posted by: "Larry Bowen" I've been doing the same, normally about 1350 for me. I think I'll just stay with my current technique. Thx, - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: Steve Glasgow [mailto:willfly@carolina.rr.com] > Sent: Saturday, November 26, 2005 9:03 PM > To: rvsoutheast-list@matronics.com > Subject: Re: RVSouthEast-List: EIS Leaning > > --> RVSouthEast-List message posted by: "Steve Glasgow" > --> > > I have tried them without much success. I believe they would > work better with a fuel injected engine than aspirated. > > I just lean till highest EGT peaks or running rough and then > richen 50 degrees. Somewhere around 1380 on mine. > > Cappy > > ----- Original Message ----- > From: "Larry Bowen" > To: > Subject: RVSouthEast-List: EIS Leaning > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > > > > I know a couple of you guys have the EIS engine monitor in > your planes. > > Do > > you rely on the "digital leaning pages"? I've had those > pages disabled so > > far. Thinking of trying them.... > > > > http://www.grtavionics.com/leanpage.htm > > > > - > > Larry Bowen > > Larry@BowenAero.com > > http://BowenAero.com > > > > > > > > > > > > > >