Today's Message Index:
----------------------
1. 04:00 AM - Re: Fuel Tanks (Steve Glasgow)
2. 04:17 AM - Re: Stormy's Fly-In dates (Steve Glasgow)
3. 04:24 AM - Re: Fuel Tanks (Dale Ensing)
4. 04:52 AM - Re: Fuel Tanks (Mike.Munn@fluor.com)
5. 06:44 AM - Re: Stormy's Fly-In dates (Wayne Williams)
6. 07:04 AM - Re: Stormy's Fly-In dates (sportav8r@aol.com)
7. 07:53 AM - Re: Stormy's Fly-In dates (Wayne Williams)
8. 12:07 PM - Re: Stormy's Fly-In dates (sportav8r@aol.com)
9. 12:09 PM - Re: Stormy's Fly-In dates (sportav8r@aol.com)
10. 01:52 PM - Re: Stormy's Fly-In dates (Wayne Williams)
11. 02:39 PM - Carb Heat (bertrv6@highstream.net)
12. 03:06 PM - Re: Carb Heat (Steve Glasgow)
13. 03:22 PM - Re: Stormy's Fly-In dates (Craig)
14. 03:23 PM - Strakes for 8's (Steve Glasgow)
15. 04:16 PM - Re: Strakes for 8's (Larry Bowen)
16. 05:21 PM - Re: Strakes for 8's (Steve Glasgow)
17. 05:29 PM - Re: 8's only (Demeylor@aol.com)
18. 05:53 PM - Re: Carb Heat ()
19. 05:59 PM - Re: Stormy's Fly-In dates (sportav8r@aol.com)
20. 06:39 PM - Re: Paint (Larry Bowen)
21. 06:44 PM - Re: Carb Heat (Larry Bowen)
22. 07:54 PM - Re: Carb Heat (Robert Dickson)
23. 08:46 PM - Re: Carb Heat (Wayne Williams)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Steve Glasgow" <willfly@carolina.rr.com>
No they are fine. We will be working in the 2" crack next to the fuselage and
wanted the kind that you can use an Allen wrench on.
Cappy
----- Original Message -----
From: Bill Repucci
To: rvsoutheast-list@matronics.com
Sent: Monday, February 27, 2006 10:26 PM
Subject: RE: RVSouthEast-List: Fuel Tanks
--> RVSouthEast-List message posted by: "Bill Repucci" <bill@repucci.com>
Dumb question, why SS? I bought a bunch of carbon steel cap screws that
I plan on using around the plane and on the fuel tanks, should I not use
these?
Bill
RV-9 aka the future N941WR
www.repucci.com/bill/baf.html
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Dale
Ensing
Sent: Sunday, February 26, 2006 12:42 PM
To: rvsoutheast-list@matronics.com
Subject: Re: RVSouthEast-List: Fuel Tanks
--> RVSouthEast-List message posted by: "Dale Ensing"
--> <densing@carolina.rr.com>
Cappy,
I also installed my tank inspection plates with 8-32 SS socket head cap
screws. Have had to re-torque screws a couple of times to stop a weeping
leak. I was very conservative when torturing the screws originally to
avoid distorting the cork gasket. What has worked well for me is a small
ratchet tool handle that accepts various screwdriver heads. Hex head
drivers are also available that will fit the Allen head cap screws. It
is easy to judge the torque applied using this tool set up and easy to
get at the tank inspection plates with the fairings remove. Dale Ensing
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: "Steve Glasgow" <willfly@carolina.rr.com>
I will put it on my calendar now.
Cappy
----- Original Message -----
From: sportav8r@aol.com
To: rvsoutheast-list@matronics.com ; OhioValleyRVators@yahoogroups.com
Sent: Monday, February 27, 2006 8:58 PM
Subject: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: sportav8r@aol.com
Looks like June 17, with a rain date of June 24. How's that grab everyone?
I'm thinking ribs this year instead of barbecue, maybe? BBQ was good last year,
maybe even better than in the Carolinas ;-) but Miriam wowed me with some
really fabulous ribs recently, and if I can figure a way to cook them in the quantities
necessary... we'll do it.
Please set aside the day.
-Stormy
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Dale Ensing" <densing@carolina.rr.com>
The carbon steel screws will rust so plan on coating them where they are
exposed.
Dale
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: Mike.Munn@fluor.com
SS will not rust. Any of the cad plated CS screws can rust. All it takes
is a tiny nick (with a screwdriver) in the cad plating and it is violated.
Rust will start at the nick and will spread over time.
Mike Munn
RV8
"Bill Repucci"
<bill@repucci.com>
Sent by:
To
owner-rvsoutheast-list-server@m <rvsoutheast-list@matronics.com>
atronics.com
cc
02/27/2006 10:26 PM
Please respond to
Subject
rvsoutheast-list RE: RVSouthEast-List:
Fuel Tanks
--> RVSouthEast-List message posted by: "Bill Repucci" <bill@repucci.com>
Dumb question, why SS? I bought a bunch of carbon steel cap screws that
I plan on using around the plane and on the fuel tanks, should I not use
these?
Bill
RV-9 aka the future N941WR
www.repucci.com/bill/baf.html
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Dale
Ensing
Sent: Sunday, February 26, 2006 12:42 PM
Subject: Re: RVSouthEast-List: Fuel Tanks
--> RVSouthEast-List message posted by: "Dale Ensing"
--> <densing@carolina.rr.com>
Cappy,
I also installed my tank inspection plates with 8-32 SS socket head cap
screws. Have had to re-torque screws a couple of times to stop a weeping
leak. I was very conservative when torturing the screws originally to
avoid distorting the cork gasket. What has worked well for me is a small
ratchet tool handle that accepts various screwdriver heads. Hex head
drivers are also available that will fit the Allen head cap screws. It
is easy to judge the torque applied using this tool set up and easy to
get at the tank inspection plates with the fairings remove. Dale Ensing
The information transmitted is intended only for the person
or entity to which it is addressed and may contain proprietary,
business-confidential and/or privileged material.
If you are not the intended recipient of this message you
are hereby notified that any use, review, retransmission,
dissemination, distribution, reproduction or any action taken
in reliance upon this message is prohibited. If you received
this in error, please contact the sender and delete the
material from any computer. Any views expressed in this message
are those of the individual sender and may not necessarily reflect
the views of the company.
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: "Wayne Williams" <rwayne@gamewood.net>
Have you memorized my call weekends??
Hope it rains... ;)
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
sportav8r@aol.com
Sent: Monday, February 27, 2006 8:59 PM
Subject: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: sportav8r@aol.com
Looks like June 17, with a rain date of June 24. How's that grab everyone?
I'm thinking ribs this year instead of barbecue, maybe? BBQ was good last
year, maybe even better than in the Carolinas ;-) but Miriam wowed me with
some really fabulous ribs recently, and if I can figure a way to cook them
in the quantities necessary... we'll do it.
Please set aside the day.
-Stormy
--
--
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: sportav8r@aol.com
I forgot to ask first if you're available that day. If not, I'm cancelling ;-)
-Stormy
-----Original Message-----
From: Larry Bowen <Larry@bowenaero.com>
Sent: Mon, 27 Feb 2006 21:18:03 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
This year's flying is getting off to a delicious start!
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: sportav8r@aol.com [mailto:sportav8r@aol.com]
> Sent: Monday, February 27, 2006 8:59 PM
> To: rvsoutheast-list@matronics.com; OhioValleyRVators@yahoogroups.com
> Subject: RVSouthEast-List: Stormy's Fly-In dates
>
> --> RVSouthEast-List message posted by: sportav8r@aol.com
>
> Looks like June 17, with a rain date of June 24. How's that
> grab everyone?
>
> I'm thinking ribs this year instead of barbecue, maybe? BBQ
> was good last year, maybe even better than in the Carolinas
> ;-) but Miriam wowed me with some really fabulous ribs
> recently, and if I can figure a way to cook them in the
> quantities necessary... we'll do it.
>
> Please set aside the day.
>
> -Stormy
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: "Wayne Williams" <rwayne@gamewood.net>
I'll just have to come up for my own personal "Stormy's Place" party!-- And
I'll bring the ribs. (Of course I'll invite everyone else, too.)
Don't you love it when friends schedule a party at your place then ask if
it's okay?
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
sportav8r@aol.com
Sent: Tuesday, February 28, 2006 10:04 AM
Subject: Re: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: sportav8r@aol.com
I forgot to ask first if you're available that day. If not, I'm cancelling
;-)
-Stormy
-----Original Message-----
From: Larry Bowen <Larry@bowenaero.com>
Sent: Mon, 27 Feb 2006 21:18:03 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
This year's flying is getting off to a delicious start!
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: sportav8r@aol.com [mailto:sportav8r@aol.com]
> Sent: Monday, February 27, 2006 8:59 PM
> To: rvsoutheast-list@matronics.com; OhioValleyRVators@yahoogroups.com
> Subject: RVSouthEast-List: Stormy's Fly-In dates
>
> --> RVSouthEast-List message posted by: sportav8r@aol.com
>
> Looks like June 17, with a rain date of June 24. How's that
> grab everyone?
>
> I'm thinking ribs this year instead of barbecue, maybe? BBQ
> was good last year, maybe even better than in the Carolinas
> ;-) but Miriam wowed me with some really fabulous ribs
> recently, and if I can figure a way to cook them in the
> quantities necessary... we'll do it.
>
> Please set aside the day.
>
> -Stormy
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
--
--
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: sportav8r@aol.com
Great idea, b
-----Original Message-----
From: Wayne Williams <rwayne@gamewood.net>
Sent: Tue, 28 Feb 2006 10:52:53 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Wayne Williams" <rwayne@gamewood.net>
I'll just have to come up for my own personal "Stormy's Place" party!-- And
I'll bring the ribs. (Of course I'll invite everyone else, too.)
Don't you love it when friends schedule a party at your place then ask if
it's okay?
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
sportav8r@aol.com
Sent: Tuesday, February 28, 2006 10:04 AM
Subject: Re: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: sportav8r@aol.com
I forgot to ask first if you're available that day. If not, I'm cancelling
;-)
-Stormy
-----Original Message-----
From: Larry Bowen <Larry@bowenaero.com>
Sent: Mon, 27 Feb 2006 21:18:03 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
This year's flying is getting off to a delicious start!
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: sportav8r@aol.com [mailto:sportav8r@aol.com]
> Sent: Monday, February 27, 2006 8:59 PM
> To: rvsoutheast-list@matronics.com; OhioValleyRVators@yahoogroups.com
> Subject: RVSouthEast-List: Stormy's Fly-In dates
>
> --> RVSouthEast-List message posted by: sportav8r@aol.com
>
> Looks like June 17, with a rain date of June 24. How's that
> grab everyone?
>
> I'm thinking ribs this year instead of barbecue, maybe? BBQ
> was good last year, maybe even better than in the Carolinas
> ;-) but Miriam wowed me with some really fabulous ribs
> recently, and if I can figure a way to cook them in the
> quantities necessary... we'll do it.
>
> Please set aside the day.
>
> -Stormy
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
--
--
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: sportav8r@aol.com
Great idea, but wait till I have avionics and wiring supplies all lined up ;-)
Or, if you are the impatient type, I'm expecting a rolling hangar door to come
on the big truck in about three weeks... I'll provide the tools and ladders.
-Stormy
-----Original Message-----
From: Wayne Williams <rwayne@gamewood.net>
Sent: Tue, 28 Feb 2006 10:52:53 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Wayne Williams" <rwayne@gamewood.net>
I'll just have to come up for my own personal "Stormy's Place" party!-- And
I'll bring the ribs. (Of course I'll invite everyone else, too.)
Don't you love it when friends schedule a party at your place then ask if
it's okay?
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
sportav8r@aol.com
Sent: Tuesday, February 28, 2006 10:04 AM
Subject: Re: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: sportav8r@aol.com
I forgot to ask first if you're available that day. If not, I'm cancelling
;-)
-Stormy
-----Original Message-----
From: Larry Bowen <Larry@bowenaero.com>
Sent: Mon, 27 Feb 2006 21:18:03 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
This year's flying is getting off to a delicious start!
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> Frm: sportav8r@aol.com [mailto:sportav8r@aol.com]
> Sent: Monday, February 27, 2006 8:59 PM
> To: rvsoutheast-list@matronics.com; OhioValleyRVators@yahoogroups.com
> Subject: RVSouthEast-List: Stormy's Fly-In dates
>
> --> RVSouthEast-List message posted by: sportav8r@aol.com
>
> Looks like June 17, with a rain date of June 24. How's that
> grab everyone?
>
> I'm thinking ribs this year instead of barbecue, maybe? BBQ
> was good last year, maybe even better than in the Carolinas
> ;-) but Miriam wowed me with some really fabulous ribs
> recently, and if I can figure a way to cook them in the
> quantities necessary... we'll do it.
>
> Please set aside the day.
>
> -Stormy
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
--
--
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: "Wayne Williams" <rwayne@gamewood.net>
Power tools!! Sounds fun.
WW
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
sportav8r@aol.com
Sent: Tuesday, February 28, 2006 3:09 PM
Subject: Re: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: sportav8r@aol.com
Great idea, but wait till I have avionics and wiring supplies all lined up
;-)
Or, if you are the impatient type, I'm expecting a rolling hangar door to
come on the big truck in about three weeks... I'll provide the tools and
ladders.
-Stormy
-----Original Message-----
From: Wayne Williams <rwayne@gamewood.net>
Sent: Tue, 28 Feb 2006 10:52:53 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Wayne Williams"
<rwayne@gamewood.net>
I'll just have to come up for my own personal "Stormy's Place" party!-- And
I'll bring the ribs. (Of course I'll invite everyone else, too.)
Don't you love it when friends schedule a party at your place then ask if
it's okay?
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
sportav8r@aol.com
Sent: Tuesday, February 28, 2006 10:04 AM
Subject: Re: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: sportav8r@aol.com
I forgot to ask first if you're available that day. If not, I'm cancelling
;-)
-Stormy
-----Original Message-----
From: Larry Bowen <Larry@bowenaero.com>
Sent: Mon, 27 Feb 2006 21:18:03 -0500
Subject: RE: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
This year's flying is getting off to a delicious start!
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> Frm: sportav8r@aol.com [mailto:sportav8r@aol.com]
> Sent: Monday, February 27, 2006 8:59 PM
> To: rvsoutheast-list@matronics.com; OhioValleyRVators@yahoogroups.com
> Subject: RVSouthEast-List: Stormy's Fly-In dates
>
> --> RVSouthEast-List message posted by: sportav8r@aol.com
>
> Looks like June 17, with a rain date of June 24. How's that
> grab everyone?
>
> I'm thinking ribs this year instead of barbecue, maybe? BBQ
> was good last year, maybe even better than in the Carolinas
> ;-) but Miriam wowed me with some really fabulous ribs
> recently, and if I can figure a way to cook them in the
> quantities necessary... we'll do it.
>
> Please set aside the day.
>
> -Stormy
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
--
--
--
--
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: bertrv6@highstream.net
Hi:
First time I try to contact this list.
Question is I do not get any confirmation on my EIS, on rpm drop. when
applying Carb Heat.
I have checked with other rv onwners, they do not understand why?
We check every thing...looks OK..
It is standard RV6A....I have checked when taxing,, after temp is hot..
also during flying...on the pattern, nothing...
My friend with same RV6a, gets 50 RPM drop even when taxing...
He does not have EIS.. has regular gauges..
Any Suggestions, comments appreciated
Bert
RV6A
Do Not Archive
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Steve Glasgow" <willfly@carolina.rr.com>
I had the same problem when I started flying. Changed to a better Carb Heater
than the original and restricted the opening a bit, then I got a drop. Drop me
a line and I will send a photo of what I have on Cappy's Toy.
Steve Glasgow-Cappy
N123SG RV-8
Cappy's Toy
704-362-0005
704-281-7884
----- Original Message -----
From: bertrv6@highstream.net
To: RVSouthEast-List@matronics.com
Sent: Tuesday, February 28, 2006 5:38 PM
Subject: RVSouthEast-List: Carb Heat
--> RVSouthEast-List message posted by: bertrv6@highstream.net
Hi:
First time I try to contact this list.
Question is I do not get any confirmation on my EIS, on rpm drop. when
applying Carb Heat.
I have checked with other rv onwners, they do not understand why?
We check every thing...looks OK..
It is standard RV6A....I have checked when taxing,, after temp is hot..
also during flying...on the pattern, nothing...
My friend with same RV6a, gets 50 RPM drop even when taxing...
He does not have EIS.. has regular gauges..
Any Suggestions, comments appreciated
Bert
RV6A
Do Not Archive
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: Craig <craigtxtx@yahoo.com>
I'll look forward to it. Last year's event was great. Good food, great folks
and a lot of fun tubing down the river........ remember, you have my tubes!
I plan to attend either weekend.
Craig Gallenbach
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Steve Glasgow" <willfly@carolina.rr.com>
Can I send a photo on SERV? If so here is the strake. I will also send it to
Larry and he can post it if not.
Today I got fairly smooth air and believe the things work. Full flap stall speed
seemed to drop from 60 MPH to 55 MPH. Also the shutter is gone.
Look at the leading edge of the wing and look for the cross pattern of rivets on
the fuselage. The middle of the cross is the rivet you drill out and replace
with a countersunk screw (nuts on inside of gear legs). The other three holes
are just drilled and screwed the same way. A backing plate is recommended.
The aft tail is set to 1.125" above the wing.
Tape will work well if you want to test them yourself. But if you loose them you
buy Cappy a new set.
Later,
Steve Glasgow-Cappy
N123SG RV-8
Cappy's Toy
704-362-0005
704-281-7884
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
I've uploaded it to the SERV photo album. Looks nice. It would make a nice
template. :)
http://servpix.myphotoalbum.com
Thanks,
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: Steve Glasgow [mailto:willfly@carolina.rr.com]
> Sent: Tuesday, February 28, 2006 6:23 PM
> To: Bowen, Larry; SERV
> Subject: RVSouthEast-List: Strakes for 8's
>
> --> RVSouthEast-List message posted by: "Steve Glasgow"
> --> <willfly@carolina.rr.com>
>
> Can I send a photo on SERV? If so here is the strake. I
> will also send it to Larry and he can post it if not.
>
> Today I got fairly smooth air and believe the things work.
> Full flap stall speed seemed to drop from 60 MPH to 55 MPH.
> Also the shutter is gone.
>
> Look at the leading edge of the wing and look for the cross
> pattern of rivets on the fuselage. The middle of the cross
> is the rivet you drill out and replace with a countersunk
> screw (nuts on inside of gear legs). The other three holes
> are just drilled and screwed the same way. A backing plate
> is recommended. The aft tail is set to 1.125" above the wing.
>
> Tape will work well if you want to test them yourself. But
> if you loose them you buy Cappy a new set.
>
> Later,
>
> Steve Glasgow-Cappy
> N123SG RV-8
> Cappy's Toy
> 704-362-0005
> 704-281-7884
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Strakes for 8's |
--> RVSouthEast-List message posted by: "Steve Glasgow" <willfly@carolina.rr.com>
We can make a lot of Templates.
Cappy
----- Original Message -----
From: Larry Bowen
To: rvsoutheast-list@matronics.com
Sent: Tuesday, February 28, 2006 7:15 PM
Subject: RE: RVSouthEast-List: Strakes for 8's
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
I've uploaded it to the SERV photo album. Looks nice. It would make a nice
template. :)
http://servpix.myphotoalbum.com
Thanks,
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: Steve Glasgow [mailto:willfly@carolina.rr.com]
> Sent: Tuesday, February 28, 2006 6:23 PM
> To: Bowen, Larry; SERV
> Subject: RVSouthEast-List: Strakes for 8's
>
> --> RVSouthEast-List message posted by: "Steve Glasgow"
> --> <willfly@carolina.rr.com>
>
> Can I send a photo on SERV? If so here is the strake. I
> will also send it to Larry and he can post it if not.
>
> Today I got fairly smooth air and believe the things work.
> Full flap stall speed seemed to drop from 60 MPH to 55 MPH.
> Also the shutter is gone.
>
> Look at the leading edge of the wing and look for the cross
> pattern of rivets on the fuselage. The middle of the cross
> is the rivet you drill out and replace with a countersunk
> screw (nuts on inside of gear legs). The other three holes
> are just drilled and screwed the same way. A backing plate
> is recommended. The aft tail is set to 1.125" above the wing.
>
> Tape will work well if you want to test them yourself. But
> if you loose them you buy Cappy a new set.
>
> Later,
>
> Steve Glasgow-Cappy
> N123SG RV-8
> Cappy's Toy
> 704-362-0005
> 704-281-7884
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: Demeylor@aol.com
Larry, Your plane looks fabulous. Do you have it yet? What is the wt. gain.
Thanks Dean
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: <tadsargent@bellsouth.net>
I do not get a dramatic drop either, maybe 10 degrees at an altitude of 3-5000
feet, but not on the ground.
Have you checked your carb temp while applying heat?
Tad
>
> From: bertrv6@highstream.net
> Date: 2006/02/28 Tue PM 05:38:49 EST
> To: RVSouthEast-List@matronics.com
> Subject: RVSouthEast-List: Carb Heat
>
> --> RVSouthEast-List message posted by: bertrv6@highstream.net
>
>
>
> Hi:
>
> First time I try to contact this list.
>
> Question is I do not get any confirmation on my EIS, on rpm drop. when
> applying Carb Heat.
>
> I have checked with other rv onwners, they do not understand why?
>
> We check every thing...looks OK..
>
> It is standard RV6A....I have checked when taxing,, after temp is hot..
> also during flying...on the pattern, nothing...
>
> My friend with same RV6a, gets 50 RPM drop even when taxing...
>
> He does not have EIS.. has regular gauges..
>
> Any Suggestions, comments appreciated
>
> Bert
>
> RV6A
>
> Do Not Archive
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stormy's Fly-In dates |
--> RVSouthEast-List message posted by: sportav8r@aol.com
Craig,
How can I tell you this? They were leaking, so...
I took the liberty of having your tubes tied. Hope that was okay.
-Stormy
-----Original Message-----
From: Craig <craigtxtx@yahoo.com>
Sent: Tue, 28 Feb 2006 15:21:52 -0800 (PST)
Subject: Re: RVSouthEast-List: Stormy's Fly-In dates
--> RVSouthEast-List message posted by: Craig <craigtxtx@yahoo.com>
I'll look forward to it. Last year's event was great. Good food, great folks
and a lot of fun tubing down the river........ remember, you have my tubes!
I plan to attend either weekend.
Craig Gallenbach
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
Thanks. When did you see it? I went there tonight with Len, but they left
before we got there. It gets returned this weekend at the soonest, or maybe
next week. They had to strip and re-do the flaps after the black stripes
blistered for some reason. No idea what the weight gain is. I'll be doing
a W&B before I leave RUQ.
PS - Did a couple rolls with Len on the way there. Easy as pie...
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: Demeylor@aol.com [mailto:Demeylor@aol.com]
> Sent: Tuesday, February 28, 2006 8:29 PM
> To: rvsoutheast-list@matronics.com
> Subject: Re: RVSouthEast-List: 8's only
>
> --> RVSouthEast-List message posted by: Demeylor@aol.com
>
> Larry, Your plane looks fabulous. Do you have it yet? What is
> the wt. gain.
> Thanks Dean
>
>
>
>
> Photoshare, and much much more:
>
>
>
>
>
>
>
>
>
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
I have about a 20 rpm drop during run-up per the EIS. I have the bigger
heat muff. I think of it more as an alternate air source than carb heat.
>From what I've heard little or no drop is fairly common on the RV's.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> --> RVSouthEast-List message posted by: <tadsargent@bellsouth.net>
>
> I do not get a dramatic drop either, maybe 10 degrees at an
> altitude of 3-5000 feet, but not on the ground.
> Have you checked your carb temp while applying heat?
> Tad
> >
> > --> RVSouthEast-List message posted by: bertrv6@highstream.net
> >
> > Hi:
> >
> > First time I try to contact this list.
> >
> > Question is I do not get any confirmation on my EIS, on rpm drop.
> > when applying Carb Heat.
> >
> > I have checked with other rv onwners, they do not understand why?
> >
> > We check every thing...looks OK..
> >
> > It is standard RV6A....I have checked when taxing,, after
> temp is hot..
> > also during flying...on the pattern, nothing...
> >
> > My friend with same RV6a, gets 50 RPM drop even when taxing...
> >
> > He does not have EIS.. has regular gauges..
> >
> > Any Suggestions, comments appreciated
> >
> > Bert
> >
> > RV6A
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: Robert Dickson <robert@thenews-journal.com>
I've got Vetterman's good carb heat muff and a flange mounted
directly to FAB (no gap as in plans) and I don't get any drop on my EIS.
Like Larry said, I view it more as an alternate air source than carb
heat.
Robert Dickson
RV-6A N69WZ
150 hrs
On Feb 28, 2006, at 5:38 PM, bertrv6@highstream.net wrote:
--> RVSouthEast-List message posted by: bertrv6@highstream.net
Hi:
First time I try to contact this list.
Question is I do not get any confirmation on my EIS, on rpm drop. when
applying Carb Heat.
I have checked with other rv onwners, they do not understand why?
We check every thing...looks OK..
It is standard RV6A....I have checked when taxing,, after temp is
hot..
also during flying...on the pattern, nothing...
My friend with same RV6a, gets 50 RPM drop even when taxing...
He does not have EIS.. has regular gauges..
Any Suggestions, comments appreciated
Bert
RV6A
Do Not Archive
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Wayne Williams" <rwayne@gamewood.net>
I have an EIS and a large heat muff for my carb heat. I get a little drop in
rpm, but about 2" drop in MAP. I agree that your experience is normal for
RVs.
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
bertrv6@highstream.net
Sent: Tuesday, February 28, 2006 5:39 PM
Subject: RVSouthEast-List: Carb Heat
--> RVSouthEast-List message posted by: bertrv6@highstream.net
Hi:
First time I try to contact this list.
Question is I do not get any confirmation on my EIS, on rpm drop. when
applying Carb Heat.
I have checked with other rv onwners, they do not understand why?
We check every thing...looks OK..
It is standard RV6A....I have checked when taxing,, after temp is hot..
also during flying...on the pattern, nothing...
My friend with same RV6a, gets 50 RPM drop even when taxing...
He does not have EIS.. has regular gauges..
Any Suggestions, comments appreciated
Bert
RV6A
Do Not Archive
--
--
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|