---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Mon 04/24/06: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:20 AM - Re: SNF Video (Lenleg@aol.com) 2. 10:26 AM - Re: SNF Video (James Clark) 3. 11:00 AM - Re: SNF Video (Tim Bolton) 4. 11:05 AM - Re: SNF Video (BOB martin) 5. 11:29 AM - Re: SNF Video (James Clark) 6. 11:34 AM - Re: Ga$ (Bill Repucci) 7. 02:52 PM - Re: SNF Video (Larry Bowen) 8. 02:55 PM - Re: SNF Video (Larry Bowen) 9. 02:56 PM - Re: SNF Video (Larry Bowen) 10. 05:46 PM - Eastover Air Ranch annual fly-in (Craig) 11. 07:07 PM - Re: Eastover Air Ranch annual fly-in (Steve Glasgow) 12. 07:38 PM - Re: Eastover Air Ranch annual fly-in (Larry Bowen) ________________________________ Message 1 _____________________________________ Time: 10:20:28 AM PST US From: Lenleg@aol.com Subject: Re: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: Lenleg@aol.com Sometime I would love to talk with you about this option ... I would love to add it to my plane. Len In a message dated 4/23/2006 9:03:03 PM Eastern Daylight Time, Larry@bowenaero.com writes: --> RVSouthEast-List message posted by: "Larry Bowen" I haven't shopped hard for one in a couple months, but this is the one I looked at last. It's a couple steps above what I have already, and they have a variety of lenses & filters available. http://shop.viosport.com/store/customer/ourgear.php?page=ac3_overview - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: James Clark [mailto:jclarkmail@gmail.com] > Sent: Sunday, April 23, 2006 4:30 PM > To: rvsoutheast-list@matronics.com > Subject: Re: RVSouthEast-List: SNF Video > > --> RVSouthEast-List message posted by: "James Clark" > --> > > Larry, > > What are you *considering* for higher resolution?? > > I am thinking about putting one in the RV6A that I am > building, even though the cap is rivetted on! I **knew** I > should have done nutplates. > > James > > > > On 4/23/06, Larry Bowen wrote: > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > --> > > > > > > Thanks. I like the tailcam too. Although lately I've thought of > > upgrading it to something more hi-res. That would mean > operating on > > the fiberglass tip that's already painted. That's a good > reason NOT > > to do it! > > > > - > > Larry Bowen > > Larry@BowenAero.com > > http://BowenAero.com > > > > -- > > This is an alternate email. Please continue to email me at > > james@nextupventures.com . > > > > > > > Photoshare, and much much more: > > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 10:26:16 AM PST US From: "James Clark" Subject: Re: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "James Clark" Len, I am going to be looking into this prety soon as well. Maybe we can approach it at the same time. One thing yu **MIGHT** want to do now while your plane is down is to make sure that the rudder cap is removeable via screws and nutplates. Mine current is rivetted in and I need to address that. James On 4/24/06, Lenleg@aol.com wrote: > > --> RVSouthEast-List message posted by: Lenleg@aol.com > > > Sometime I would love to talk with you about this option ... I would > love to > add it to my plane. > > Len > > > In a message dated 4/23/2006 9:03:03 PM Eastern Daylight Time, > Larry@bowenaero.com writes: > > --> RVSouthEast-List message posted by: "Larry Bowen" < > Larry@BowenAero.com> > > I haven't shopped hard for one in a couple months, but this is the one I > looked at last. It's a couple steps above what I have already, and they > have a variety of lenses & filters available. > > http://shop.viosport.com/store/customer/ourgear.php?page=3Dac3_overview > > - > Larry Bowen > Larry@BowenAero.com > http://BowenAero.com > > > > -----Original Message----- > > From: James Clark [mailto:jclarkmail@gmail.com] > > Sent: Sunday, April 23, 2006 4:30 PM > > To: rvsoutheast-list@matronics.com > > Subject: Re: RVSouthEast-List: SNF Video > > > > --> RVSouthEast-List message posted by: "James Clark" > > --> > > > > Larry, > > > > What are you *considering* for higher resolution?? > > > > I am thinking about putting one in the RV6A that I am > > building, even though the cap is rivetted on! I **knew** I > > should have done nutplates. > > > > James > > > > > > > > On 4/23/06, Larry Bowen wrote: > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > --> > > > > > > > > > Thanks. I like the tailcam too. Although lately I've thought of > > > upgrading it to something more hi-res. That would mean > > operating on > > > the fiberglass tip that's already painted. That's a good > > reason NOT > > > to do it! > > > > > > - > > > Larry Bowen > > > Larry@BowenAero.com > > > http://BowenAero.com > > > > > > -- > > > This is an alternate email. Please continue to email me at > > > james@nextupventures.com . > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > > > > > > > > > > > > -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 3 _____________________________________ Time: 11:00:42 AM PST US From: "Tim Bolton" Subject: Re: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "Tim Bolton" I just started construction on my -7 empennage yesterday and I'm interested in the tail cam as well. Is there anything I should do now to make it easier to wire later, besides the removable rudder cap? Tim Bolton Charlotte, NC ----- Original Message ----- From: "James Clark" Sent: Monday, April 24, 2006 1:26 PM Subject: Re: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "James Clark" Len, I am going to be looking into this prety soon as well. Maybe we can approach it at the same time. One thing yu **MIGHT** want to do now while your plane is down is to make sure that the rudder cap is removeable via screws and nutplates. Mine current is rivetted in and I need to address that. James On 4/24/06, Lenleg@aol.com wrote: > > --> RVSouthEast-List message posted by: Lenleg@aol.com > > > Sometime I would love to talk with you about this option ... I would > love to > add it to my plane. > > Len > > > In a message dated 4/23/2006 9:03:03 PM Eastern Daylight Time, > Larry@bowenaero.com writes: > > --> RVSouthEast-List message posted by: "Larry Bowen" < > Larry@BowenAero.com> > > I haven't shopped hard for one in a couple months, but this is the one I > looked at last. It's a couple steps above what I have already, and they > have a variety of lenses & filters available. > > http://shop.viosport.com/store/customer/ourgear.php?page=3Dac3_overview > > - > Larry Bowen > Larry@BowenAero.com > http://BowenAero.com > > > > -----Original Message----- > > From: James Clark [mailto:jclarkmail@gmail.com] > > Sent: Sunday, April 23, 2006 4:30 PM > > To: rvsoutheast-list@matronics.com > > Subject: Re: RVSouthEast-List: SNF Video > > > > --> RVSouthEast-List message posted by: "James Clark" > > --> > > > > Larry, > > > > What are you *considering* for higher resolution?? > > > > I am thinking about putting one in the RV6A that I am > > building, even though the cap is rivetted on! I **knew** I > > should have done nutplates. > > > > James > > > > > > > > On 4/23/06, Larry Bowen wrote: > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > --> > > > > > > > > > Thanks. I like the tailcam too. Although lately I've thought of > > > upgrading it to something more hi-res. That would mean > > operating on > > > the fiberglass tip that's already painted. That's a good > > reason NOT > > > to do it! > > > > > > - > > > Larry Bowen > > > Larry@BowenAero.com > > > http://BowenAero.com > > > > > > -- > > > This is an alternate email. Please continue to email me at > > > james@nextupventures.com . > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > > > > > > > > > > > > -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 4 _____________________________________ Time: 11:05:55 AM PST US From: "BOB martin" Subject: Re: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "BOB martin" Len and James......well, Larry too....... My fiberglass top of the vertical stab is mounted permanently too... isn't there another place to mount a cam that would be cool too... Dan C......has one mounted in the cockpit somewhere, seems like that would be worlds easier to do as well. You would see what the pilot sees. Don't get me wrong........Larry's is the coolest thing I've ever seen, but easier would be ok with me. Heck......I still can't program my VCR........ Bob Martin Louisa Va RV-6 >From: "James Clark" >To: rvsoutheast-list@matronics.com >Subject: Re: RVSouthEast-List: SNF Video >Date: Mon, 24 Apr 2006 13:26:05 -0400 > >--> RVSouthEast-List message posted by: "James Clark" > > >Len, > >I am going to be looking into this prety soon as well. > >Maybe we can approach it at the same time. One thing yu **MIGHT** want to >do >now while your plane is down is to make sure that the rudder cap is >removeable via screws and nutplates. Mine current is rivetted in and I need >to address that. > >James > > >On 4/24/06, Lenleg@aol.com wrote: > > > > --> RVSouthEast-List message posted by: Lenleg@aol.com > > > > > > Sometime I would love to talk with you about this option ... I would > > love to > > add it to my plane. > > > > Len > > > > > > > > > > > > In a message dated 4/23/2006 9:03:03 PM Eastern Daylight Time, > > Larry@bowenaero.com writes: > > > > --> RVSouthEast-List message posted by: "Larry Bowen" < > > Larry@BowenAero.com> > > > > I haven't shopped hard for one in a couple months, but this is the one >I > > looked at last. It's a couple steps above what I have already, and >they > > have a variety of lenses & filters available. > > > > http://shop.viosport.com/store/customer/ourgear.php?page=3Dac3_overview > > > > - > > Larry Bowen > > Larry@BowenAero.com > > http://BowenAero.com > > > > > > > -----Original Message----- > > > From: James Clark [mailto:jclarkmail@gmail.com] > > > Sent: Sunday, April 23, 2006 4:30 PM > > > To: rvsoutheast-list@matronics.com > > > Subject: Re: RVSouthEast-List: SNF Video > > > > > > --> RVSouthEast-List message posted by: "James Clark" > > > --> > > > > > > Larry, > > > > > > What are you *considering* for higher resolution?? > > > > > > I am thinking about putting one in the RV6A that I am > > > building, even though the cap is rivetted on! I **knew** I > > > should have done nutplates. > > > > > > James > > > > > > > > > > > > On 4/23/06, Larry Bowen wrote: > > > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > > --> > > > > > > > > > > > > Thanks. I like the tailcam too. Although lately I've thought of > > > > upgrading it to something more hi-res. That would mean > > > operating on > > > > the fiberglass tip that's already painted. That's a good > > > reason NOT > > > > to do it! > > > > > > > > - > > > > Larry Bowen > > > > Larry@BowenAero.com > > > > http://BowenAero.com > > > > > > > > -- > > > > This is an alternate email. Please continue to email me at > > > > james@nextupventures.com . > > > > > > > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >-- >This is an alternate email. Please continue to email me at >james@nextupventures.com . > > ________________________________ Message 5 _____________________________________ Time: 11:29:18 AM PST US From: "James Clark" Subject: Re: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "James Clark" I have a mount for camera in the RV6. It is OK but not the same as what Larry has. I think having the vertical stab mount as an option is the best way. You can always do the inside the cockpit later. James On 4/24/06, BOB martin wrote: > > --> RVSouthEast-List message posted by: "BOB martin" > > Len and James......well, Larry too....... > My fiberglass top of the vertical stab is mounted permanently too... > isn't there another place to mount a cam that would be cool too... > Dan C......has one mounted in the cockpit somewhere, seems like that would > be worlds easier to do as well. You would see what the pilot sees. > Don't get me wrong........Larry's is the coolest thing I've ever seen, but > easier would be ok with me. Heck......I still can't program my > VCR........ > Bob Martin > Louisa Va > RV-6 > -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 6 _____________________________________ Time: 11:34:45 AM PST US From: "Bill Repucci" Subject: RE: RVSouthEast-List: Ga$ --> RVSouthEast-List message posted by: "Bill Repucci" Ron, The following was just posted as part of this thread: http://www.vansairforce.com/community/showthread.php?t=7247 [quote] it works better than you might think -------- I had the chance to fly an O-235 powered RV-9A off and on for about 18 months and learned to really like the airplane. As with any RV, you make engine choices based, no so much on the airplane as the job you will be asking it to do. 118 hp was good enough to give the 990 lb airplane good take off and climb and excellent cruise. I'd quite commonly cruise 155-160 mph, which I though was pretty darn good for that hp -- especially considering that every other airplane I'd flown with the same engine was lucky to break 100. [/quote] I may have to rethink the fuel burn a little but if that holds up, my dream of a 175 mph RV on only 135 hp sounds like a possibility, more so since I won't have the nose wheel to slow me down. Bill -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill Repucci Sent: Friday, April 21, 2006 9:54 AM Subject: RE: RVSouthEast-List: Ga$ --> RVSouthEast-List message posted by: "Bill Repucci" --> Ron, All I know is what I've been told by another guy who has an O-290-D2 powered RV-9 (Tail wheel), like what I'm building. His empty weight is 998, and I suspect mine will be a bit higher. Van's lists the cruise speed for this combination as 175 mph. From what I keep hearing, Van's numbers are usually on the mark. Also, the prop makes a big difference. Craig Catto cut one for me that he suspects will get me to 180 top speed. With all that background info, I sure am keeping my fingers crossed for a 75% power 175 mph cruise. The GPH thing, well that may be a bit optimistic but then again, I'll be burning regular unleaded in that 80 octane, low compression engine Bill -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Ron and Shannon AWAD Sent: Thursday, April 20, 2006 8:44 PM Subject: RE: RVSouthEast-List: Ga$ --> RVSouthEast-List message posted by: "Ron and Shannon AWAD" --> I was told by many people including the folks at the EAA that handle the autogas STC for certified planes, that with my 0-320 160 HP engine I would need at least 93 Octane autofuel or av gas. I ran 87 in it for a month or so when I got it and at times I could hear some pinging so the 93 makes sence to me. No pinging or other issues with the 93. Bill, off topic but do you really think your bird will go that fast on that engine and with that fuel burn? I have had 2 other planes with 0-290 engines and both burned between 6-7 gallons per hour at best. In my RV-4 I am burning nearly 7 gallons per hour going 170 mph. Ron Awad >From: "Bill Repucci" >To: >Subject: RE: RVSouthEast-List: Ga$ >Date: Thu, 20 Apr 2006 09:47:18 -0400 > >--> RVSouthEast-List message posted by: "Bill Repucci" >--> > >Why use 93 Octane? > >If your engine is certified for 80 Octane, like mine, regular unleaded >at 87 Octane will work just fine. If your engine is certified for 100 >Octane, than you shouldn't be using mogas anyway. > >Bill >O-290 powered RV-9 and expecting 5.6 GPH @ 175 mph > >-----Original Message----- >From: owner-rvsoutheast-list-server@matronics.com >[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Ron >and Shannon AWAD >Sent: Thursday, April 20, 2006 9:08 AM >To: rvsoutheast-list@matronics.com >Subject: Re: RVSouthEast-List: Ga$ > > >--> RVSouthEast-List message posted by: "Ron and Shannon AWAD" >--> > >No not stirring the pot.... if I were to stir the pot I would say >something to the effect of if you can afford a near 100 thousand dollar >plane, why > >worry about how much the gas costs? Kinda like the owner of a Porsche >taking his car to Walmart to get a oil change...... lol > >Gas is gas and using good premium 93 Octane car gas is a alternative >fuel that will work just fine in most of our airplanes. I use it in my >RV-4 with >no problems whatsoever. I save usually around a dollar per gallon over >Avgas. And for me, price of gas does make a big impact, I am a Walmart >shopper afterall. > > >Ron Awad > > > >From: "tadsargent" > >To: > >Subject: Re: RVSouthEast-List: Ga$ > >Date: Thu, 20 Apr 2006 08:54:45 -0400 > > > >--> RVSouthEast-List message posted by: "tadsargent" > > > > > >Chirp chirp chirp.... > >Stirring the pot? > >Tad > > > >----- Original Message ----- > >From: "Ron and Shannon AWAD" > >To: > >Sent: Thursday, April 20, 2006 7:45 AM > >Subject: Re: RVSouthEast-List: Ga$ > > > > > > > --> RVSouthEast-List message posted by: "Ron and Shannon AWAD" > > > > > > > > If you guys want to save some bucks on gas, why not use auto gas? > > > Or > > > > at least a autogas av gas blend? > > > > > > > > > > > > Ron Awad > > > > > > > > > > > > > > > > > > >From: "David Davenport" > > > >To: > > > >Subject: Re: RVSouthEast-List: Ga$ > > > >Date: Wed, 19 Apr 2006 23:30:45 -0400 > > > > > > > >--> RVSouthEast-List message posted by: "David Davenport" > > > > > > > > > > > >Guys, FYI, Elizabethtown, NC (EYF) is pricing 100LL at 3.25 right > > > >now. > >Just > > > >in case anyone is going that way, > > > > > > > >David > > > >RV-6 168DD > > > >----- Original Message ----- > > > >From: "Larry Bowen" > > > >To: > > > >Sent: Wednesday, April 19, 2006 10:29 AM > > > >Subject: RVSouthEast-List: Ga$ > > > > > > > > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > > > > > > > > > > > > > Last I overheard, Stanley Cty (VUJ) was the cheap place for > > > > > fuel. > >So > > > > > without verifying, I went there to fill up last night...$3.64. > >Ouch. > > > > > > > > > > On a related note, I've started cruising at lower power > > > > > settings, 21 > > > >MP/23 > > > > > RPM instead of the 23/23 I've been using. Cooler CHTS, at > > > > > least > > > > > > 1 > > > >Gal/Hr > > > > > less fuel and 6-7 Kts slower.... > > > > > > > > > > -- > > > > > Larry Bowen > > > > > Larry@BowenAero.com > > > > > http://BowenAero.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 7 _____________________________________ Time: 02:52:04 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "Larry Bowen" You might consider enlarging the tooling holes in the VS a little and installing some grommets or snap bushings. Leaving string in there to pull wires through isn't necessary. You can feed it through with some hinge pin just as easy. - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: Tim Bolton [mailto:timbolton@therv7.com] > Sent: Monday, April 24, 2006 2:00 PM > To: rvsoutheast-list@matronics.com > Subject: Re: RVSouthEast-List: SNF Video > > --> RVSouthEast-List message posted by: "Tim Bolton" > --> > > I just started construction on my -7 empennage yesterday and > I'm interested in the tail cam as well. Is there anything I > should do now to make it easier to wire later, besides the > removable rudder cap? > > Tim Bolton > Charlotte, NC > > > > ----- Original Message ----- > From: "James Clark" > To: > Sent: Monday, April 24, 2006 1:26 PM > Subject: Re: RVSouthEast-List: SNF Video > > > --> RVSouthEast-List message posted by: "James Clark" > --> > > Len, > > I am going to be looking into this prety soon as well. > > Maybe we can approach it at the same time. One thing yu > **MIGHT** want to do now while your plane is down is to make > sure that the rudder cap is removeable via screws and > nutplates. Mine current is rivetted in and I need to address that. > > James > > > > On 4/24/06, Lenleg@aol.com wrote: > > > > --> RVSouthEast-List message posted by: Lenleg@aol.com > > > > > > Sometime I would love to talk with you about this option > ... I would > > love to add it to my plane. > > > > Len > > > > > > > > > > > > In a message dated 4/23/2006 9:03:03 PM Eastern Daylight Time, > > Larry@bowenaero.com writes: > > > > --> RVSouthEast-List message posted by: "Larry Bowen" < > > Larry@BowenAero.com> > > > > I haven't shopped hard for one in a couple months, but this is the > > one I looked at last. It's a couple steps above what I > have already, > > and they have a variety of lenses & filters available. > > > > > http://shop.viosport.com/store/customer/ourgear.php?page=3Dac3_overvie > > w > > > > - > > Larry Bowen > > Larry@BowenAero.com > > http://BowenAero.com > > > > > > > -----Original Message----- > > > From: James Clark [mailto:jclarkmail@gmail.com] > > > Sent: Sunday, April 23, 2006 4:30 PM > > > To: rvsoutheast-list@matronics.com > > > Subject: Re: RVSouthEast-List: SNF Video > > > > > > --> RVSouthEast-List message posted by: "James Clark" > > > --> > > > > > > Larry, > > > > > > What are you *considering* for higher resolution?? > > > > > > I am thinking about putting one in the RV6A that I am building, > > > even though the cap is rivetted on! I **knew** I should > have done > > > nutplates. > > > > > > James > > > > > > > > > > > > On 4/23/06, Larry Bowen wrote: > > > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > > --> > > > > > > > > > > > > Thanks. I like the tailcam too. Although lately I've > thought of > > > > upgrading it to something more hi-res. That would mean > > > operating on > > > > the fiberglass tip that's already painted. That's a good > > > reason NOT > > > > to do it! > > > > > > > > - > > > > Larry Bowen > > > > Larry@BowenAero.com > > > > http://BowenAero.com > > > > > > > > -- > > > > This is an alternate email. Please continue to email me at > > > > james@nextupventures.com . > > > > > > > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > This is an alternate email. Please continue to email me at > james@nextupventures.com . > > > > > > > > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 02:55:44 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "Larry Bowen" I think the VS mount is primo, but others would be fun to experiment with too. Wingtip, landing light, wheel pant, HS, etc. My biggest regret on the VS mounting is not making it more serviceable. The tip is removeable, but the camera is mounted in microballons. Makes upgrading or tweaking (I think my focus is a little off...) difficult to say the least. - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: BOB martin [mailto:libertyva@msn.com] > Sent: Monday, April 24, 2006 2:06 PM > To: rvsoutheast-list@matronics.com > Subject: Re: RVSouthEast-List: SNF Video > > --> RVSouthEast-List message posted by: "BOB martin" > > > Len and James......well, Larry too....... > My fiberglass top of the vertical stab is mounted permanently too... > isn't there another place to mount a cam that would be cool too... > Dan C......has one mounted in the cockpit somewhere, seems > like that would be worlds easier to do as well. You would see > what the pilot sees. > Don't get me wrong........Larry's is the coolest thing I've > ever seen, but easier would be ok with me. Heck......I still > can't program my VCR........ > Bob Martin > Louisa Va > RV-6 > > > >From: "James Clark" > >To: rvsoutheast-list@matronics.com > >Subject: Re: RVSouthEast-List: SNF Video > >Date: Mon, 24 Apr 2006 13:26:05 -0400 > > > >--> RVSouthEast-List message posted by: "James Clark" > > > > > >Len, > > > >I am going to be looking into this prety soon as well. > > > >Maybe we can approach it at the same time. One thing yu > **MIGHT** want > >to do now while your plane is down is to make sure that the > rudder cap > >is removeable via screws and nutplates. Mine current is > rivetted in and > >I need to address that. > > > >James > > > > > > > >On 4/24/06, Lenleg@aol.com wrote: > > > > > > --> RVSouthEast-List message posted by: Lenleg@aol.com > > > > > > > > > Sometime I would love to talk with you about this option > ... I would > > > love to add it to my plane. > > > > > > Len > > > > > > > > > > > > > > > > > > In a message dated 4/23/2006 9:03:03 PM Eastern Daylight Time, > > > Larry@bowenaero.com writes: > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" < > > > Larry@BowenAero.com> > > > > > > I haven't shopped hard for one in a couple months, but > this is the > > > one > >I > > > looked at last. It's a couple steps above what I have > already, and > >they > > > have a variety of lenses & filters available. > > > > > > > http://shop.viosport.com/store/customer/ourgear.php?page=3Dac3_overv > > > iew > > > > > > - > > > Larry Bowen > > > Larry@BowenAero.com > > > http://BowenAero.com > > > > > > > > > > -----Original Message----- > > > > From: James Clark [mailto:jclarkmail@gmail.com] > > > > Sent: Sunday, April 23, 2006 4:30 PM > > > > To: rvsoutheast-list@matronics.com > > > > Subject: Re: RVSouthEast-List: SNF Video > > > > > > > > --> RVSouthEast-List message posted by: "James Clark" > > > > --> > > > > > > > > Larry, > > > > > > > > What are you *considering* for higher resolution?? > > > > > > > > I am thinking about putting one in the RV6A that I am > building, > > > > even though the cap is rivetted on! I **knew** I > should have done > > > > nutplates. > > > > > > > > James > > > > > > > > > > > > > > > > On 4/23/06, Larry Bowen wrote: > > > > > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > > > --> > > > > > > > > > > > > > > > Thanks. I like the tailcam too. Although lately > I've thought of > > > > > upgrading it to something more hi-res. That would mean > > > > operating on > > > > > the fiberglass tip that's already painted. That's a good > > > > reason NOT > > > > > to do it! > > > > > > > > > > - > > > > > Larry Bowen > > > > > Larry@BowenAero.com > > > > > http://BowenAero.com > > > > > > > > > > -- > > > > > This is an alternate email. Please continue to email me at > > > > > james@nextupventures.com . > > > > > > > > > > > > > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >-- > >This is an alternate email. Please continue to email me at > >james@nextupventures.com . > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 02:56:16 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: SNF Video --> RVSouthEast-List message posted by: "Larry Bowen" Sure, I'd love to help you spend you money. :) - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: Lenleg@aol.com [mailto:Lenleg@aol.com] > Sent: Monday, April 24, 2006 1:19 PM > To: rvsoutheast-list@matronics.com > Subject: Re: RVSouthEast-List: SNF Video > > --> RVSouthEast-List message posted by: Lenleg@aol.com > > > Sometime I would love to talk with you about this option ... > I would love to add it to my plane. > > Len > > > > > > In a message dated 4/23/2006 9:03:03 PM Eastern Daylight > Time, Larry@bowenaero.com writes: > > --> RVSouthEast-List message posted by: "Larry Bowen" > --> > > I haven't shopped hard for one in a couple months, but this > is the one I looked at last. It's a couple steps above what > I have already, and they have a variety of lenses & filters > available. > > http://shop.viosport.com/store/customer/ourgear.php?page=ac3_overview > > - > Larry Bowen > Larry@BowenAero.com > http://BowenAero.com > > > > -----Original Message----- > > From: James Clark [mailto:jclarkmail@gmail.com] > > Sent: Sunday, April 23, 2006 4:30 PM > > To: rvsoutheast-list@matronics.com > > Subject: Re: RVSouthEast-List: SNF Video > > > > --> RVSouthEast-List message posted by: "James Clark" > > --> > > > > Larry, > > > > What are you *considering* for higher resolution?? > > > > I am thinking about putting one in the RV6A that I am > building, even > > though the cap is rivetted on! I **knew** I should have done > > nutplates. > > > > James > > > > > > > > On 4/23/06, Larry Bowen wrote: > > > > > > --> RVSouthEast-List message posted by: "Larry Bowen" > > > --> > > > > > > > > > Thanks. I like the tailcam too. Although lately I've > thought of > > > upgrading it to something more hi-res. That would mean > > operating on > > > the fiberglass tip that's already painted. That's a good > > reason NOT > > > to do it! > > > > > > - > > > Larry Bowen > > > Larry@BowenAero.com > > > http://BowenAero.com > > > > > > -- > > > This is an alternate email. Please continue to email me at > > > james@nextupventures.com . > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Photoshare, and much much more: > > > > > > > > > ________________________________ Message 10 ____________________________________ Time: 05:46:39 PM PST US From: Craig Subject: RVSouthEast-List: Eastover Air Ranch annual fly-in --> RVSouthEast-List message posted by: Craig If you are looking for a place to fly to this Saturday, Eastover Air Ranch, 6nc3, just outside of Fayetteville, NC is having its annual (almost) May Day Fly-in this Saturday, April, 29 from 10-3. Rain date is Sunday, April 30. A youth group from a local church will be selling soft drinks, dogs, burgers, etc for those inclined to boost their cholesterol level. For info about Eastover Air Ranch, see http://www.airnav.com/airport/6NC3 Note: The CTAF is 122.9. Hope to see some RV's again this year. Craig Gallenbach RV8AQB workin' on the canopy....ugh! ________________________________ Message 11 ____________________________________ Time: 07:07:11 PM PST US From: "Steve Glasgow" Subject: Re: RVSouthEast-List: Eastover Air Ranch annual fly-in --> RVSouthEast-List message posted by: "Steve Glasgow" Sounds good to me! Cappy ----- Original Message ----- From: Craig To: SERV Sent: Monday, April 24, 2006 8:45 PM Subject: RVSouthEast-List: Eastover Air Ranch annual fly-in --> RVSouthEast-List message posted by: Craig If you are looking for a place to fly to this Saturday, Eastover Air Ranch, 6nc3, just outside of Fayetteville, NC is having its annual (almost) May Day Fly-in this Saturday, April, 29 from 10-3. Rain date is Sunday, April 30. A youth group from a local church will be selling soft drinks, dogs, burgers, etc for those inclined to boost their cholesterol level. For info about Eastover Air Ranch, see http://www.airnav.com/airport/6NC3 Note: The CTAF is 122.9. Hope to see some RV's again this year. Craig Gallenbach RV8AQB workin' on the canopy....ugh! ________________________________ Message 12 ____________________________________ Time: 07:38:20 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: Eastover Air Ranch annual fly-in --> RVSouthEast-List message posted by: "Larry Bowen" I'll try to make it. - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: Craig [mailto:craigtxtx@yahoo.com] > Sent: Monday, April 24, 2006 8:46 PM > To: SERV > Subject: RVSouthEast-List: Eastover Air Ranch annual fly-in > > --> RVSouthEast-List message posted by: Craig > > If you are looking for a place to fly to this Saturday, > Eastover Air Ranch, 6nc3, just outside of Fayetteville, NC is > having its annual (almost) May Day Fly-in this Saturday, > April, 29 from 10-3. Rain date is Sunday, April 30. A youth > group from a local church will be selling soft drinks, dogs, > burgers, etc for those inclined to boost their cholesterol level. > > For info about Eastover Air Ranch, see > http://www.airnav.com/airport/6NC3 > > Note: The CTAF is 122.9. > > Hope to see some RV's again this year. > > Craig Gallenbach > RV8AQB workin' on the canopy....ugh! > > > > > Photoshare, and much much more: > > > > > > > > >