----------------------------------------------------------
                           RVSouthEast-List Digest Archive
                                      ---
                     Total Messages Posted Mon 08/14/06: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:41 AM - Re: Emailing: DoorOpenLside.jpg  (Steve Glasgow)
     2. 01:21 PM - Re: Emailing: DoorOpenLside.jpg  (Ed Anderson)
     3. 06:10 PM - 9/16 RUQ Fly-In  (Larry Bowen)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:41:38 AM PST US
From: "Steve Glasgow" <willfly@carolina.rr.com>
Subject: Re: RVSouthEast-List: Emailing: DoorOpenLside.jpg

Way to go Ed!  Looks great.  Now we are all looking forward to more 
noise at our events.

Cappy
  ----- Original Message ----- 
  From: Ed Anderson 
  To: rvsoutheast-list@matronics.com ; Rotary motors in aircraft 
  Sent: Sunday, August 13, 2006 1:03 PM
  Subject: RVSouthEast-List: Emailing: DoorOpenLside.jpg


  Ok, folks.

  Here it is, the hangar door completely open.  Minor sag at the 
junction of 2x4 on front-most edge and some torquing of metal beam at 
the ends where it meets the supporting post.  Will stiffen with some 
plate and angle iron.
  Given no sheathing (yet) to stiffen the structure, I am very pleased 
with the results.

  If anyone wants more photos, send me an e mail

  Ed


  The message is ready to be sent with the following file or link 
attachments:
  DoorOpenLside.jpg

e-mail security 

________________________________  Message 2  _____________________________________


Time: 01:21:50 PM PST US
From: "Ed Anderson" <eanderson@carolina.rr.com>
Subject: Re: RVSouthEast-List: Emailing: DoorOpenLside.jpg

Thanks, Cappy.

Still got to get the sheathing on - but (famous words) that should be a 
piece of cake.

Ed
  ----- Original Message ----- 
  From: Steve Glasgow 
  To: rvsoutheast-list@matronics.com 
  Sent: Monday, August 14, 2006 9:41 AM
  Subject: Re: RVSouthEast-List: Emailing: DoorOpenLside.jpg


  Way to go Ed!  Looks great.  Now we are all looking forward to more 
noise at our events.

  Cappy
    ----- Original Message ----- 
    From: Ed Anderson 
    To: rvsoutheast-list@matronics.com ; Rotary motors in aircraft 
    Sent: Sunday, August 13, 2006 1:03 PM
    Subject: RVSouthEast-List: Emailing: DoorOpenLside.jpg


    Ok, folks.

    Here it is, the hangar door completely open.  Minor sag at the 
junction of 2x4 on front-most edge and some torquing of metal beam at 
the ends where it meets the supporting post.  Will stiffen with some 
plate and angle iron.
    Given no sheathing (yet) to stiffen the structure, I am very pleased 
with the results.

    If anyone wants more photos, send me an e mail

    Ed


    The message is ready to be sent with the following file or link 
attachments:
    DoorOpenLside.jpg

    Note: To protect against computer viruses, e-mail programs may 
your e-mail security 


=========================
==========
=========================
==========
=========================
==========
=========================
==========
=========================
==========


________________________________  Message 3  _____________________________________


Time: 06:10:36 PM PST US
Subject: RVSouthEast-List: 9/16 RUQ Fly-In
From: "Larry Bowen" <Larry@bowenaero.com>

--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>

FYI - The RV Rally at RUQ that was cancelled earlier this year due to
conflicts has been resurrected as a general fly-in on 9/16.  Area RV's are
highly encouraged to attend.  More details to follow...


-- 
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com