Today's Message Index:
----------------------
1. 02:40 AM - Re: First Flight! (Marcus Cooper)
2. 04:08 AM - Fw: Oil cooler (George Tamvakis)
3. 05:12 AM - Re: Labor Day Weekend (Lenleg@aol.com)
4. 05:23 AM - Re: Re: RV 6 or 6A (Lenleg@aol.com)
5. 05:29 AM - formation video (Radomir Zaric)
6. 06:07 AM - Re: formation video (Lenleg@aol.com)
7. 09:42 AM - Re: Fw: Oil cooler (Steve Glasgow)
8. 09:53 AM - Okracoke (Steve Glasgow)
9. 10:11 AM - Re: Fw: Oil cooler (George Tamvakis)
10. 10:48 AM - Re: Fw: Oil cooler (Rad Z)
11. 11:09 AM - Re: Fw: Oil cooler (George Tamvakis)
12. 01:10 PM - Re: Okracoke (Wayne Williams)
13. 02:57 PM - Re: Fw: Oil cooler (Larry Bowen)
14. 03:16 PM - Re: Fw: Oil cooler (George Tamvakis)
15. 03:16 PM - Re: Fw: Oil cooler (tadsargent)
16. 03:39 PM - Re: Okracoke (Steve Glasgow)
17. 05:51 PM - Re: Fw: Oil cooler (Fiveonepw@aol.com)
18. 06:17 PM - Re: Re: RV 6 or 6A (TWOBARBEE@wmconnect.com)
19. 06:29 PM - Re: Fw: Oil cooler (George Tamvakis)
20. 07:11 PM - Re: Re: RV 6 or 6A (bill crothers)
21. 07:45 PM - Re: Fw: Oil cooler (l-fussell)
22. 08:07 PM - Re: Re: RV 6 or 6A (GARRY BROWN)
23. 08:33 PM - Re: Okracoke (Wayne Williams)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Thanks, the snag is the magneto only puts out =BD has many pulses as the
Lightspeed ignition so regardless of the setting the right mag
(Lightspeed)
will register twice as much as the left. I opted to have the electronic
ignition be the =93normal=94 indication since it should be a little more
reliable.
Marcus
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
tadsargent
Sent: Monday, August 21, 2006 10:40 PM
Subject: Re: RVSouthEast-List: First Flight!
Marcus check your setting for the EIS if you still read half RPM The
setting should be 1 not 2 for the offset.
Stripes
----- Original Message -----
From: Marcus Cooper <mailto:coop85@bellsouth.net>
Sent: Monday, August 21, 2006 8:34 PM
Subject: RE: RVSouthEast-List: First Flight!
The EIS is doing great, thanks for all the help. I ended up adding a
switch
to select RPM source and then do the math for the Magneto which is only
indicating 50%.
Marcus
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Steve
Glasgow
Sent: Sunday, August 20, 2006 9:44 PM
Subject: Re: RVSouthEast-List: First Flight!
Way to go Marcus and welcome aboard. How is your EIS doing?
Cappy
----- Original Message -----
From: Marcus Cooper <mailto:coop85@bellsouth.net>
Sent: Sunday, August 20, 2006 8:24 PM
Subject: RVSouthEast-List: First Flight!
I've mostly been a lurker here, but I finally got my new RV-10, N585MR,
airborne yesterday and will hopefully become an active member if you are
open to another. I'm based out of Valdosta, GA until next March so
hopefully I'll get my 40 hours done as soon as possible and puts some
faces
to the names.
Marcus
2 hrs down, 38 to go
Do not archive
atronics.com/Navigator?RVSouthEast-List
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
----- Original Message -----
From: George Tamvakis
Sent: Tuesday, August 22, 2006 7:05 AM
Subject: Fw: Oil cooler
----- Original Message -----
From: George Tamvakis
Sent: Monday, August 21, 2006 10:02 PM
Subject: Oil cooler
Does anyone have mounted the oil cooler on the firewall instead on the
engine baffles? If so do you have any info as far as where maybe some
pictures or dimensions so it does not interfere with the engine install
and mount.I am installing an IO 360.
Thanks
George
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Labor Day Weekend |
Our bikes are being delivered to the airport ... that does not necessarily
make my wife happy ....knowing that she will have to carry baggage on the bike
..... but if the weekend is anything like last year ... will be worth it if I
have to carry all the baggage or make several trips !!
Donna and I are looking forward to the trip !!
Len
In a message dated 8/21/2006 7:52:40 P.M. Eastern Standard Time,
willfly@carolina.rr.com writes:
Isn't it funny, those of us that might want to work can't and those that
don't want to work, have to.
Oh well!
Are you having your bikes delivered to the airport? Lets hear from the rest
of you!
Cappy
----- Original Message -----
From: _Lenleg@aol.com_ (mailto:Lenleg@aol.com)
Sent: Monday, August 21, 2006 5:59 PM
Subject: Re: RVSouthEast-List: Labor Day Weekend
In a message dated 8/21/2006 12:05:12 P.M. Eastern Standard Time,
_willfly@carolina.rr.com_ (mailto:willfly@carolina.rr.com) writes:
All I need is the ETA on Friday. My guess would be between 12:00 and 12:30
PM Friday September 1.
Please let me know if this is OK and I will let Crews Inn know.
Cappy:
Those of us that have to work ... like me ... (yes ... I am jealous) ...
will not arrive until later in the day.
Len
atronics.com/Navigator?RVSouthEast-List
(http://www.matronics.com/Navigator?RVSouthEast-List)
(http://www.matronics.com/contribution)
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Mike:
Talk to me .... tell me no .... oh Mike ????
Len
In a message dated 8/21/2006 9:41:48 P.M. Eastern Standard Time,
TWOBARBEE@wmconnect.com writes:
My, RV-6 is for sale for more info. Call Mike @ 910 638 5675
(http://www.matronics.com/Navigator?RVSouthEast-List)
(http://www.matronics.com/contribution)
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill and Tad went for some practice a week ago and I tagged along as a
cameraman.
http://www.youtube.com/watch?v=JCKqXNf2TW0
Enjoy!
Radomir
-7A Finish
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
Who were those professionals ??? Good job guys ... very nice job Tad in
keeping your wings steady !! Looked good !
Len
In a message dated 8/22/2006 8:30:39 A.M. Eastern Standard Time,
vitez@carolina.rr.com writes:
Bill and Tad went for some practice a week ago and I tagged along as a
cameraman.
_http://www.youtube.com/watch?v=JCKqXNf2TW0_
(http://www.youtube.com/watch?v=JCKqXNf2TW0)
Enjoy!
Radomir
-7A Finish
(http://www.matronics.com/Navigator?RVSouthEast-List)
(http://www.matronics.com/contribution)
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
George I don't have any pictures but Reno (Bill Cruthers) has his
mounted on the firewall. You might get him to take a few pictures the
next time his cowl is off.
Cappy
----- Original Message -----
From: George Tamvakis
To: rvsoutheast-list@matronics.com
Sent: Tuesday, August 22, 2006 7:06 AM
Subject: RVSouthEast-List: Fw: Oil cooler
----- Original Message -----
From: George Tamvakis
To: RV7A@yahoogroups.com
Sent: Tuesday, August 22, 2006 7:05 AM
Subject: Fw: Oil cooler
----- Original Message -----
From: George Tamvakis
To: RV7and7A@yahoogroups.com
Sent: Monday, August 21, 2006 10:02 PM
Subject: Oil cooler
Does anyone have mounted the oil cooler on the firewall instead on the
engine baffles? If so do you have any info as far as where maybe some
pictures or dimensions so it does not interfere with the engine install
and mount.I am installing an IO 360.
Thanks
George
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Steve Glasgow" <willfly@carolina.rr.com>
OK here's is the deal.
Len, Larry and Stormy will have bikes at the airport Friday afternoon, so
they don't need a pick up from Crews Inn.
Cappy will plan arrival at 2:00 PM Friday and have Crews Inn on STBY to pick
me and Miss Lynnie up. Anybody else not staying at Crews Inn can probably
get a lift with Cappy just let me know.
Wayne what time do you plan to arrive Saturday? You can have your bikes
delivered to the airport and some of us can meet you on arrival to show you
the way back to the Crews Inn.
Cappy
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
Thanks for the info.I am trying to decide where to mount it since some
people are saying that mounting it on the baffles causes them to crack(
the baffles). Also I heard that mounting it on the firewall may run
hotter for the IO360.
thanks for the help
George
----- Original Message -----
From: Steve Glasgow
To: rvsoutheast-list@matronics.com
Sent: Tuesday, August 22, 2006 12:42 PM
Subject: Re: RVSouthEast-List: Fw: Oil cooler
George I don't have any pictures but Reno (Bill Cruthers) has his
mounted on the firewall. You might get him to take a few pictures the
next time his cowl is off.
Cappy
----- Original Message -----
From: George Tamvakis
To: rvsoutheast-list@matronicscom
Sent: Tuesday, August 22, 2006 7:06 AM
Subject: RVSouthEast-List: Fw: Oil cooler
----- Original Message -----
From: George Tamvakis
To: RV7A@yahoogroups.com
Sent: Tuesday, August 22, 2006 7:05 AM
Subject: Fw: Oil cooler
----- Original Message -----
From: George Tamvakis
To: RV7and7A@yahoogroups.com
Sent: Monday, August 21, 2006 10:02 PM
Subject: Oil cooler
Does anyone have mounted the oil cooler on the firewall instead on
the engine baffles? If so do you have any info as far as where maybe
some pictures or dimensions so it does not interfere with the engine
install and mount.I am installing an IO 360.
Thanks
George
atronics.com/Navigator?RVSouthEast-List
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
--> RVSouthEast-List message posted by: Rad Z <microsmurfer@yahoo.com>
George, which RV? Here's a photo of a -9A:
http://www.n523rv.com/fwf/
Bill C. has his on the other side, but he has an -8.
I just received the mounting kit, but I haven't made
any decisions yet whether to install it on FW or not.
HTH
Radomir
-7A Finish
--- George Tamvakis <gtamvakis@earthlink.net> wrote:
> Thanks for the info.I am trying to decide where to
> mount it since some people are saying that mounting
> it on the baffles causes them to crack( the
> baffles). Also I heard that mounting it on the
> firewall may run hotter for the IO360.
>
> thanks for the help
> George
__________________________________________________
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
--> RVSouthEast-List message posted by: "George Tamvakis" <gtamvakis@earthlink.net>
It is a 7A and I am ready to mount mine I was goingto do it last night but
stoped because of the fact i have never seen one and i am woried about
mounting it where later it might get in the way. it seems that the left side
of the firewall (lower section) itis not a busy as the rest so I am sure
that is where it is going , also I hope that the hoses will be long enough.
George
----- Original Message -----
From: "Rad Z" <microsmurfer@yahoo.com>
Sent: Tuesday, August 22, 2006 1:47 PM
Subject: Re: RVSouthEast-List: Fw: Oil cooler
> --> RVSouthEast-List message posted by: Rad Z <microsmurfer@yahoo.com>
>
> George, which RV? Here's a photo of a -9A:
>
> http://www.n523rv.com/fwf/
>
>
> Bill C. has his on the other side, but he has an -8.
>
> I just received the mounting kit, but I haven't made
> any decisions yet whether to install it on FW or not.
>
>
> HTH
> Radomir
> -7A Finish
>
>
> --- George Tamvakis <gtamvakis@earthlink.net> wrote:
>
>> Thanks for the info.I am trying to decide where to
>> mount it since some people are saying that mounting
>> it on the baffles causes them to crack( the
>> baffles). Also I heard that mounting it on the
>> firewall may run hotter for the IO360.
>>
>> thanks for the help
>> George
>
>
> __________________________________________________
>
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Wayne Williams" <rwayne@gamewood.net>
I'll thinking 0930 Sat arrival; but this could be adjusted if needed. I
called about bikes and they would only take a reservation for the week. They
recommended I get them by the day after arrival, and promised me they would
not run out. I called the realty office. Do I need to call someone else??
Thanks, Cappy.
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Steve
Glasgow
Sent: Tuesday, August 22, 2006 12:53 PM
Subject: RVSouthEast-List: Okracoke
--> RVSouthEast-List message posted by: "Steve Glasgow"
<willfly@carolina.rr.com>
OK here's is the deal.
Len, Larry and Stormy will have bikes at the airport Friday afternoon, so
they don't need a pick up from Crews Inn.
Cappy will plan arrival at 2:00 PM Friday and have Crews Inn on STBY to pick
me and Miss Lynnie up. Anybody else not staying at Crews Inn can probably
get a lift with Cappy just let me know.
Wayne what time do you plan to arrive Saturday? You can have your bikes
delivered to the airport and some of us can meet you on arrival to show you
the way back to the Crews Inn.
Cappy
--
--
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
There have been a few busted baffles, but it's hardly a guaranteed failure.
I think it offers better cooling and when done right, will serve you well
for a long time.
See attached. I got the tube reinforcement from Dan C. Knock on wood,
holding up well so far...
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> --- George Tamvakis <gtamvakis@earthlink.net> wrote:
>
> > Thanks for the info.I am trying to decide where to mount it
> since some
> > people are saying that mounting it on the baffles causes them to
> > crack( the baffles). Also I heard that mounting it on the
> firewall may
> > run hotter for the IO360.
> >
> > thanks for the help
> > George
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
--> RVSouthEast-List message posted by: "George Tamvakis" <gtamvakis@earthlink.net>
Thanks for all the info and pictures I am grateful for having a great tool
with this group and getting all this info .
It seems that it makes sense to mount it on the baffles as far as cooling
and it can be reinforced so it can be more durable.
----- Original Message -----
From: "Larry Bowen" <Larry@bowenaero.com>
Sent: Tuesday, August 22, 2006 5:57 PM
Subject: RE: RVSouthEast-List: Fw: Oil cooler
> There have been a few busted baffles, but it's hardly a guaranteed
> failure.
> I think it offers better cooling and when done right, will serve you well
> for a long time.
>
> See attached. I got the tube reinforcement from Dan C. Knock on wood,
> holding up well so far...
>
> -
> Larry Bowen
> Larry@BowenAero.com
> http://BowenAero.com
>
>
>> --- George Tamvakis <gtamvakis@earthlink.net> wrote:
>>
>> > Thanks for the info.I am trying to decide where to mount it
>> since some
>> > people are saying that mounting it on the baffles causes them to
>> > crack( the baffles). Also I heard that mounting it on the
>> firewall may
>> > run hotter for the IO360.
>> >
>> > thanks for the help
>> > George
>
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
George I have not seen either as an issue. Bill's 360 cooler is on the
firewall and his temps are fine. My cooler is on the baffle and I have
no cracks. However I did add additional bracing to support the cooler.
Worry about issues as they arise works best for me. I have 140 hours
TT.
"Stripes"
----- Original Message -----
From: George Tamvakis
To: rvsoutheast-list@matronics.com
Sent: Tuesday, August 22, 2006 1:11 PM
Subject: Re: RVSouthEast-List: Fw: Oil cooler
Thanks for the info.I am trying to decide where to mount it since some
people are saying that mounting it on the baffles causes them to crack(
the baffles). Also I heard that mounting it on the firewall may run
hotter for the IO360.
thanks for the help
George
----- Original Message -----
From: Steve Glasgow
To: rvsoutheast-list@matronics.com
Sent: Tuesday, August 22, 2006 12:42 PM
Subject: Re: RVSouthEast-List: Fw: Oil cooler
George I don't have any pictures but Reno (Bill Cruthers) has his
mounted on the firewall. You might get him to take a few pictures the
next time his cowl is off.
Cappy
----- Original Message -----
From: George Tamvakis
To: rvsoutheast-list@matronicscom
Sent: Tuesday, August 22, 2006 7:06 AM
Subject: RVSouthEast-List: Fw: Oil cooler
----- Original Message -----
From: George Tamvakis
To: RV7A@yahoogroups.com
Sent: Tuesday, August 22, 2006 7:05 AM
Subject: Fw: Oil cooler
----- Original Message -----
From: George Tamvakis
To: RV7and7A@yahoogroups.com
Sent: Monday, August 21, 2006 10:02 PM
Subject: Oil cooler
Does anyone have mounted the oil cooler on the firewall instead on
the engine baffles? If so do you have any info as far as where maybe
some pictures or dimensions so it does not interfere with the engine
install and mount.I am installing an IO 360.
Thanks
George
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
OK we can work on the person that takes care of the Inn and see if we
can get her to pick you up at the airport.
Cappy
----- Original Message -----
From: Wayne Williams
To: rvsoutheast-list@matronics.com
Sent: Tuesday, August 22, 2006 4:10 PM
Subject: RE: RVSouthEast-List: Okracoke
--> RVSouthEast-List message posted by: "Wayne Williams"
<rwayne@gamewood.net>
I'll thinking 0930 Sat arrival; but this could be adjusted if needed.
I
called about bikes and they would only take a reservation for the
week. They
recommended I get them by the day after arrival, and promised me they
would
not run out. I called the realty office. Do I need to call someone
else??
Thanks, Cappy.
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
Steve
Glasgow
Sent: Tuesday, August 22, 2006 12:53 PM
To: SERV
Subject: RVSouthEast-List: Okracoke
--> RVSouthEast-List message posted by: "Steve Glasgow"
<willfly@carolina.rr.com>
OK here's is the deal.
Len, Larry and Stormy will have bikes at the airport Friday afternoon,
so
they don't need a pick up from Crews Inn.
Cappy will plan arrival at 2:00 PM Friday and have Crews Inn on STBY
to pick
me and Miss Lynnie up. Anybody else not staying at Crews Inn can
probably
get a lift with Cappy just let me know.
Wayne what time do you plan to arrive Saturday? You can have your
bikes
delivered to the airport and some of us can meet you on arrival to
show you
the way back to the Crews Inn.
Cappy
--
--
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
Hi George- if yer doin' a nosedragger, this may give you some ideas:
http://websites.expercraft.com/n51pw/index.php?q=log_entry&log_id=5000
Click on foto for bigger shot, >>Next Entry>> for more info...
>From The PossumWorks in TN
Mark Phillips
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi Len, I'm looking at a Glasair. Thought I would see what my 6 would bring.
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
Thanks I have checked it out .Looks really good, I also like the
pressure cowl.
George
----- Original Message -----
From: Fiveonepw@aol.com
To: rvsoutheast-list@matronics.com
Sent: Tuesday, August 22, 2006 8:50 PM
Subject: Re: RVSouthEast-List: Fw: Oil cooler
Hi George- if yer doin' a nosedragger, this may give you some ideas:
http://websites.expercraft.com/n51pw/index.php?q=log_entry&log_id=500
0
Click on foto for bigger shot, >>Next Entry>> for more info..
From The PossumWorks in TN
Mark Phillips
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
Guys, my bro-in-law in Jax, fla is interested in a 6a
(sorry Mike, he needs a training wheel), anyone
knowing about a VFR bird, pls. let me know. Bill
Crothers
--- TWOBARBEE@wmconnect.com wrote:
> Hi Len, I'm looking at a Glasair. Thought I would
> see what my 6 would bring.
>
__________________________________________________
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Oil cooler |
--> RVSouthEast-List message posted by: "l-fussell" <l-fussell@comcast.net>
George,
Give some thought to the other firewall mount items Batteries, Solenoids,
Transducers etc. Mine worked out ok but I had to do some interesting
fittings on the oil cooler lines to get the hoses routed without
interference. I used a triangular shaped mount made from aluminum angle I
had welded up locally. The cooler is tilted down about 45 degrees and the
oil lines enter from the inboard side. If I could offer one thing it is to
plan everything that is going to mount on the firewall make templates or do
what ever works to avoid later workarounds. The planning time will be well
spent, believe it or not it gets crowded on that big firewall.
just my .02
Larry
7a
----- Original Message -----
From: "George Tamvakis" <gtamvakis@earthlink.net>
Sent: Tuesday, August 22, 2006 2:09 PM
Subject: Re: RVSouthEast-List: Fw: Oil cooler
> --> RVSouthEast-List message posted by: "George Tamvakis"
> <gtamvakis@earthlink.net>
>
> It is a 7A and I am ready to mount mine I was goingto do it last night
> but stoped because of the fact i have never seen one and i am woried about
> mounting it where later it might get in the way. it seems that the left
> side of the firewall (lower section) itis not a busy as the rest so I am
> sure that is where it is going , also I hope that the hoses will be long
> enough.
>
> George
> ----- Original Message -----
> From: "Rad Z" <microsmurfer@yahoo.com>
> To: <rvsoutheast-list@matronics.com>
> Sent: Tuesday, August 22, 2006 1:47 PM
> Subject: Re: RVSouthEast-List: Fw: Oil cooler
>
>
>> --> RVSouthEast-List message posted by: Rad Z <microsmurfer@yahoo.com>
>>
>> George, which RV? Here's a photo of a -9A:
>>
>> http://www.n523rv.com/fwf/
>>
>>
>> Bill C. has his on the other side, but he has an -8.
>>
>> I just received the mounting kit, but I haven't made
>> any decisions yet whether to install it on FW or not.
>>
>>
>>
>> HTH
>> Radomir
>> -7A Finish
>>
>>
>>
>> --- George Tamvakis <gtamvakis@earthlink.net> wrote:
>>
>>> Thanks for the info.I am trying to decide where to
>>> mount it since some people are saying that mounting
>>> it on the baffles causes them to crack( the
>>> baffles). Also I heard that mounting it on the
>>> firewall may run hotter for the IO360.
>>>
>>> thanks for the help
>>> George
>>
>>
>> __________________________________________________
>>
>>
>>
>>
>
>
>
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "GARRY BROWN" <brown.garry@worldnet.att.net>
Bill, this guy has an RV-6 for sale. j1grigsby@bellsouth.net Not sure what
he is asking. It looks like a nice plane. He is out of ILM.
Garry
----- Original Message -----
From: "bill crothers" <bill28104@yahoo.com>
Sent: Tuesday, August 22, 2006 10:11 PM
Subject: Re: RVSouthEast-List: Re: RV 6 or 6A
> --> RVSouthEast-List message posted by: bill crothers
<bill28104@yahoo.com>
>
> Guys, my bro-in-law in Jax, fla is interested in a 6a
> (sorry Mike, he needs a training wheel), anyone
> knowing about a VFR bird, pls. let me know. Bill
> Crothers
>
> --- TWOBARBEE@wmconnect.com wrote:
>
> > Hi Len, I'm looking at a Glasair. Thought I would
> > see what my 6 would bring.
> >
>
>
> __________________________________________________
>
>
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Thanks, Cappy!!
Wayne
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Steve
Glasgow
Sent: Tuesday, August 22, 2006 6:39 PM
Subject: Re: RVSouthEast-List: Okracoke
OK we can work on the person that takes care of the Inn and see if we can
get her to pick you up at the airport.
Cappy
----- Original Message -----
From: Wayne Williams <mailto:rwayne@gamewood.net>
Sent: Tuesday, August 22, 2006 4:10 PM
Subject: RE: RVSouthEast-List: Okracoke
--> RVSouthEast-List message posted by: "Wayne Williams"
<rwayne@gamewood.net>
I'll thinking 0930 Sat arrival; but this could be adjusted if needed. I
called about bikes and they would only take a reservation for the week. They
recommended I get them by the day after arrival, and promised me they would
not run out. I called the realty office. Do I need to call someone else??
Thanks, Cappy.
Wayne
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Steve
Glasgow
Sent: Tuesday, August 22, 2006 12:53 PM
Subject: RVSouthEast-List: Okracoke
--> RVSouthEast-List message posted by: "Steve Glasgow"
<willfly@carolina.rr.com>
OK here's is the deal.
Len, Larry and Stormy will have bikes at the airport Friday afternoon, so
they don't need a pick up from Crews Inn.
Cappy will plan arrival at 2:00 PM Friday and have Crews Inn on STBY to pick
me and Miss Lynnie up. Anybody else not staying at Crews Inn can probably
get a lift with Cappy just let me know.
Wayne what time do you plan to arrive Saturday? You can have your bikes
delivered to the airport and some of us can meet you on arrival to show you
the way back to the Crews Inn.
Cappy
--
-- p; Features Subscriptions p; available via
-========================nbsp; Email List nbsp; generous bsp;
================
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|