RVSouthEast-List Digest Archive

Thu 09/14/06


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 06:00 AM - RUQ Fly-In (Larry Bowen)
     2. 03:37 PM - Magento question (Bert Murillo)
     3. 03:59 PM - Re: Magento question ()
     4. 04:44 PM - Apollo SL-70 wanted ()
     5. 05:36 PM - Re: Magneto question (Marcus Cooper)
     6. 07:23 PM - Re: Magento question (ben burril)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:00:11 AM PST US
    Subject: RUQ Fly-In
    From: "Larry Bowen" <Larry@bowenaero.com>
    --> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com> RV'ers - Follow the link below for info on the Fly-In at RUQ this Saturday. Hope to see you there. http://eaa1083.com/_wsn/page5.html -- Larry Bowen Larry@BowenAero.com http://BowenAero.com


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:37:44 PM PST US
    From: "Bert Murillo" <bertrv6@gmail.com>
    Subject: Magento question
    HI: I have found that when doing the mags check, there is a difference of more than 150 rpms between the mags, as recommended by lycoming.. Timing is OK, plusgs are ok, only one not checked is mixture, but i do not think this has anything to do with it... Any suggestions, appreciated. Engine is a Lyc. 0320e2d 150 HP bert rv6a do not archive


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:59:19 PM PST US
    From: <ronschreck@windstream.net>
    Subject: Re: Magento question
    --> RVSouthEast-List message posted by: <ronschreck@windstream.net> Bert, How many hours do you have on the mags? Overhaul is recommended at 500 hours on most mags. Only other suggestion I have is to swap some plug cables and see if you may have a weak one. Ron "Smokey" Schreck RV-8 "Miss Izzy" Gold Hill Airpark, NC > > From: "Bert Murillo" <bertrv6@gmail.com> > Date: 2006/09/14 Thu PM 06:37:23 EDT > To: rvsoutheast-list@matronics.com > Subject: RVSouthEast-List: Magento question > > HI: > > I have found that when doing the mags check, there is a difference of more > than > 150 rpms between the mags, as recommended by lycoming.. > > Timing is OK, plusgs are ok, only one not checked is mixture, but i do not > think > this has anything to do with it... > > Any suggestions, appreciated. Engine is a Lyc. 0320e2d 150 HP > > > bert > > rv6a > > do not archive > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:44:35 PM PST US
    From: <ronschreck@windstream.net>
    Subject: Apollo SL-70 wanted
    --> RVSouthEast-List message posted by: <ronschreck@windstream.net> Hi all, I'm looking for an Apollo SL-70 transponder, new or yellow tagged for a certified aircraft. Someone must have one gathering dust in the garage/hangar? Ron Schreck RV-8 "Miss Izzy" Gold Hill Airpark, NC


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:36:40 PM PST US
    From: "Marcus Cooper" <coop85@bellsouth.net>
    Subject: Magneto question
    Since you haven't played with the mixture yet, you may want to do a good run-up and lean the heck out of it. Then check it again. However, this usually works only if the plugs are fouled and it sounds like yours are not if the plugs look good. Marcus Do not archive _____ From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bert Murillo Sent: Thursday, September 14, 2006 6:37 PM Subject: RVSouthEast-List: Magento question HI: I have found that when doing the mags check, there is a difference of more than 150 rpms between the mags, as recommended by lycoming.. Timing is OK, plusgs are ok, only one not checked is mixture, but i do not think this has anything to do with it... Any suggestions, appreciated. Engine is a Lyc. 0320e2d 150 HP bert rv6a do not archive


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:23:51 PM PST US
    From: "ben burril" <bburril@carolina.rr.com>
    Subject: Re: Magento question
    Also Bert plugs start to break down after they get some age on them.You could have a plug breaking down under compression Ben ----- Original Message ----- From: Bert Murillo To: rvsoutheast-list@matronics.com Sent: Thursday, September 14, 2006 6:37 PM Subject: RVSouthEast-List: Magento question HI: I have found that when doing the mags check, there is a difference of more than 150 rpms between the mags, as recommended by lycoming.. Timing is OK, plusgs are ok, only one not checked is mixture, but i do not think this has anything to do with it... Any suggestions, appreciated. Engine is a Lyc. 0320e2d 150 HP bert rv6a do not archive




    Other Matronics Email List Services

  • Post A New Message
  •   rvsoutheast-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RVSouthEast-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rvsoutheast-list
  • Browse RVSouthEast-List Digests
  •   http://www.matronics.com/digest/rvsoutheast-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --