Today's Message Index:
----------------------
1. 05:04 AM - Re: Re: formation video ()
2. 05:18 AM - Re: Canopy Thanks (Randy Utsey)
3. 05:27 AM - Re: Re: formation video (James Clark)
4. 05:42 AM - Re: formation video (Lenleg@aol.com)
5. 05:42 AM - Re: formation video (tadsargent)
6. 05:42 AM - Re: Canopy Thanks (tadsargent)
7. 06:39 AM - Re: Canopy Thanks (Randy Utsey)
8. 06:50 AM - Re: formation video (Ken Harrill)
9. 01:58 PM - Re: Re: formation video (bill crothers)
10. 02:18 PM - Re: Re: formation video (Radomir Zaric)
11. 03:07 PM - Re: Re: formation video ()
12. 03:10 PM - Chapter 3 Flyin at Camden, SC (KCDN) this weekend ... (James Clark)
13. 05:12 PM - Assist requested (David Lee)
14. 06:12 PM - annual inspection (bill crothers)
15. 08:43 PM - Re: annual inspection (James Clark)
16. 08:50 PM - Re: annual inspection (Radomir Zaric)
17. 09:15 PM - Re: annual inspection (James Clark)
18. 09:20 PM - Re: annual inspection (Radomir Zaric)
19. 10:27 PM - Re: annual inspection (James Clark)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
--> RVSouthEast-List message posted by: <ronschreck@windstream.net>
Don't know what you are talking about, James. I was ALWAYS in perfect formation!
;-)
Smokey
"Lead"
>
> From: "James Clark" <jclarkmail@gmail.com>
> Date: 2006/10/02 Mon PM 11:58:22 EDT
> To: rvsoutheast-list@matronics.com
> Subject: Re: RVSouthEast-List: formation video
>
> Thanks Radomir!
>
> We obviously need more practice but I guess given the RUST that had
> developed from not having practiced in so long and the windiness (yeah,
> that's it, it was ahhh windy ... :-) ... it was a lot of fun.
>
> And the good lady at KLKR came through with the brats and burgers on the
> grill as usual!!
>
> If anyone is near Lancaster, SC, please stop in and get a few gallons of gas
> (about the cheapest in SC) and help suppor the wonderful couple there that
> always looks out for us!
>
> James
>
> On 10/2/06, Radomir Zaric <vitez@carolina.rr.com> wrote:
> >
> > Here's the video from this Saturday. Hopefully all key elements were
> > captured J
> >
> >
> >
> >
> >
> > http://www.youtube.com/watch?v=HAq_FE3gaic
> >
> >
> >
> >
> >
> > Radomir
> >
> >
> >
> > *
> >
> >
> > *
> >
> >
>
>
> --
> This is an alternate email. Please continue to email me at
> james@nextupventures.com .
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Canopy Thanks |
Well, we trimmed on the rear / how much edge clearance should you have
for the plexiglass holes?
Randy Utsey
D.J. Distributing Co.
1429 Bryant St.
Charlotte, NC 28208
800-585-4126
djdist@bellsouth.net
www.djdist.com
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Monday, October 02, 2006 9:35 PM
Subject: Re: RVSouthEast-List: Canopy Thanks
Glad to help Randy. How was the rest of the trimming.
----- Original Message -----
From: Randy Utsey
To: rvsoutheast-list@matronics.com
Sent: Monday, October 02, 2006 10:15 AM
Subject: RVSouthEast-List: Canopy Thanks
Thank you Tad & Terrie Sargent & Steve Glasgow & Tim Bolton for
cutting my canopy on Sunday. This was Tad's #4! We trimmed the rear
section after you left Tad and now I will read the directions on what to
do next.
Thanks again,
Randy Utsey
RV-7 Tip up
IO-360
MT-3 blade CS
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Sunday, October 01, 2006 8:02 PM
Subject: Re: RVSouthEast-List: Photos from today
Tim how was the rest of the canopy cutting? Did you get to cut
anything? Sorry we needed to go but my outdoor project was beckoning.
Read, my wife wanted me to finish it. Which we did not accomplish.
Save for another day.
----- Original Message -----
From: Tim Bolton
To: rvsoutheast-list@matronics.com
Sent: Sunday, October 01, 2006 8:55 AM
Subject: Re: RVSouthEast-List: Photos from today
Very nice shots. I was hoping to bum a ride yesterday to get
some air to air shots but I had a wedding to attend. Hopefully I can go
next time.
It looks like you have a little bit of dust or your sensor. Have
you ever cleaned it? If not I would try using a rocket blower first, if
that dosnt help then you may need to swab the sensor. I had to swab mine
a few months back and it made a world of difference.
Tim Bolton
Charlotte, NC
www.TheRV7.com
----- Original Message -----
From: Radomir Zaric
To: rvsoutheast-list@matronics.com
Sent: Saturday, September 30, 2006 10:20 PM
Subject: RVSouthEast-List: Photos from today
Hey guys,
Here are photos from today's formation practice. it was hard
to pick "only" this many for the web.
http://www.vitez.net/formation/lkr2/
Enjoy!
Radomir
-7A Finish
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
Yup ... except for when you forgot and fired the JATO bottles and left poor
Tad in the dust! ;-)
Of course, I am SURE I had MY wingman all over the place. :-)
Again, a good time was had. We must do it more often.
James
James
On 10/3/06, ronschreck@windstream.net <ronschreck@windstream.net> wrote:
>
> --> RVSouthEast-List message posted by: <ronschreck@windstream.net>
>
> Don't know what you are talking about, James. I was ALWAYS in perfect
> formation! ;-)
>
> Smokey
> "Lead"
> >
> > From: "James Clark" <jclarkmail@gmail.com>
> > Date: 2006/10/02 Mon PM 11:58:22 EDT
> > To: rvsoutheast-list@matronics.com
> > Subject: Re: RVSouthEast-List: formation video
> >
> > Thanks Radomir!
> >
> > We obviously need more practice but I guess given the RUST that had
> > developed from not having practiced in so long and the windiness (yeah,
> > that's it, it was ahhh windy ... :-) ... it was a lot of fun.
> >
> > And the good lady at KLKR came through with the brats and burgers on the
> > grill as usual!!
> >
> > If anyone is near Lancaster, SC, please stop in and get a few gallons of
> gas
> > (about the cheapest in SC) and help suppor the wonderful couple there
> that
> > always looks out for us!
> >
> > James
> >
> > On 10/2/06, Radomir Zaric <vitez@carolina.rr.com> wrote:
> > >
> > > Here's the video from this Saturday. Hopefully all key elements were
> > > captured J
> > >
> > >
> > >
> > >
> > >
> > > http://www.youtube.com/watch?v=HAq_FE3gaic
> > >
> > >
> > >
> > >
> > >
> > > Radomir
> > >
> > >
> > >
> > > *
> > >
> > >
> > > *
> > >
> > >
> >
> >
> > --
> > This is an alternate email. Please continue to email me at
> > james@nextupventures.com .
> >
> >
>
>
--
This is an alternate email. Please continue to email me at
james@nextupventures.com .
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
Not bad guys after having not flown together for two months !!!
Thanks for the filming Rad !
Len
In a message dated 10/2/2006 10:51:59 P.M. Eastern Standard Time,
vitez@carolina.rr.com writes:
Here=99s the video from this Saturday. Hopefully all key elements we
re
captured J
_http://www.youtube.com/watch?v=HAq_FE3gaic_
(http://www.youtube.com/watch?v=HAq_FE3gaic)
Radomir
(http://www.matronics.com/Navigator?RVSouthEast-List)
(http://www.matronics.com/contribution)
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
Guys we beat ourselves down a bit after practice but I think the video
made us look goooood. We do have room to polish our act. Any other
thoughts.
Stripes
----- Original Message -----
From: Radomir Zaric
To: rvsoutheast-list@matronics.com
Sent: Monday, October 02, 2006 10:50 PM
Subject: RVSouthEast-List: formation video
Here's the video from this Saturday. Hopefully all key elements were
captured J
http://www.youtube.com/watch?v=HAq_FE3gaic
Radomir
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Canopy Thanks |
I'm not sure what section you are talking about.
----- Original Message -----
From: Randy Utsey
To: rvsoutheast-list@matronics.com
Sent: Tuesday, October 03, 2006 8:18 AM
Subject: Re: RVSouthEast-List: Canopy Thanks
Well, we trimmed on the rear / how much edge clearance should you have
for the plexiglass holes?
Randy Utsey
D.J. Distributing Co.
1429 Bryant St.
Charlotte, NC 28208
800-585-4126
djdist@bellsouth.net
www.djdist.com
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Monday, October 02, 2006 9:35 PM
Subject: Re: RVSouthEast-List: Canopy Thanks
Glad to help Randy. How was the rest of the trimming.
----- Original Message -----
From: Randy Utsey
To: rvsoutheast-list@matronics.com
Sent: Monday, October 02, 2006 10:15 AM
Subject: RVSouthEast-List: Canopy Thanks
Thank you Tad & Terrie Sargent & Steve Glasgow & Tim Bolton for
cutting my canopy on Sunday. This was Tad's #4! We trimmed the rear
section after you left Tad and now I will read the directions on what to
do next.
Thanks again,
Randy Utsey
RV-7 Tip up
IO-360
MT-3 blade CS
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Sunday, October 01, 2006 8:02 PM
Subject: Re: RVSouthEast-List: Photos from today
Tim how was the rest of the canopy cutting? Did you get to cut
anything? Sorry we needed to go but my outdoor project was beckoning.
Read, my wife wanted me to finish it. Which we did not accomplish.
Save for another day.
----- Original Message -----
From: Tim Bolton
To: rvsoutheast-list@matronics.com
Sent: Sunday, October 01, 2006 8:55 AM
Subject: Re: RVSouthEast-List: Photos from today
Very nice shots. I was hoping to bum a ride yesterday to get
some air to air shots but I had a wedding to attend. Hopefully I can go
next time.
It looks like you have a little bit of dust or your sensor.
Have you ever cleaned it? If not I would try using a rocket blower
first, if that dosnt help then you may need to swab the sensor. I had to
swab mine a few months back and it made a world of difference.
Tim Bolton
Charlotte, NC
www.TheRV7.com
----- Original Message -----
From: Radomir Zaric
To: rvsoutheast-list@matronics.com
Sent: Saturday, September 30, 2006 10:20 PM
Subject: RVSouthEast-List: Photos from today
Hey guys,
Here are photos from today's formation practice. it was hard
to pick "only" this many for the web.
http://www.vitez.net/formation/lkr2/
Enjoy!
Radomir
-7A Finish
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Canopy Thanks |
There is 1 1/4" at the bottom where the roll bar is and a little more on
the upper section / Steve & Tim, those side pieces we were looking for
have to be made therefore we could not find them!
Randy Utsey
D.J. Distributing Co.
1429 Bryant St.
Charlotte, NC 28208
800-585-4126
djdist@bellsouth.net
www.djdist.com
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Tuesday, October 03, 2006 8:42 AM
Subject: Re: RVSouthEast-List: Canopy Thanks
I'm not sure what section you are talking about.
----- Original Message -----
From: Randy Utsey
To: rvsoutheast-list@matronics.com
Sent: Tuesday, October 03, 2006 8:18 AM
Subject: Re: RVSouthEast-List: Canopy Thanks
Well, we trimmed on the rear / how much edge clearance should you
have for the plexiglass holes?
Randy Utsey
D.J. Distributing Co.
1429 Bryant St.
Charlotte, NC 28208
800-585-4126
djdist@bellsouth.net
www.djdist.com
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Monday, October 02, 2006 9:35 PM
Subject: Re: RVSouthEast-List: Canopy Thanks
Glad to help Randy. How was the rest of the trimming.
----- Original Message -----
From: Randy Utsey
To: rvsoutheast-list@matronics.com
Sent: Monday, October 02, 2006 10:15 AM
Subject: RVSouthEast-List: Canopy Thanks
Thank you Tad & Terrie Sargent & Steve Glasgow & Tim Bolton for
cutting my canopy on Sunday. This was Tad's #4! We trimmed the rear
section after you left Tad and now I will read the directions on what to
do next.
Thanks again,
Randy Utsey
RV-7 Tip up
IO-360
MT-3 blade CS
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Sunday, October 01, 2006 8:02 PM
Subject: Re: RVSouthEast-List: Photos from today
Tim how was the rest of the canopy cutting? Did you get to
cut anything? Sorry we needed to go but my outdoor project was
beckoning. Read, my wife wanted me to finish it. Which we did not
accomplish. Save for another day.
----- Original Message -----
From: Tim Bolton
To: rvsoutheast-list@matronics.com
Sent: Sunday, October 01, 2006 8:55 AM
Subject: Re: RVSouthEast-List: Photos from today
Very nice shots. I was hoping to bum a ride yesterday to get
some air to air shots but I had a wedding to attend. Hopefully I can go
next time.
It looks like you have a little bit of dust or your sensor.
Have you ever cleaned it? If not I would try using a rocket blower
first, if that dosnt help then you may need to swab the sensor. I had to
swab mine a few months back and it made a world of difference.
Tim Bolton
Charlotte, NC
www.TheRV7.com
----- Original Message -----
From: Radomir Zaric
To: rvsoutheast-list@matronics.com
Sent: Saturday, September 30, 2006 10:20 PM
Subject: RVSouthEast-List: Photos from today
Hey guys,
Here are photos from today's formation practice. it was
hard to pick "only" this many for the web.
http://www.vitez.net/formation/lkr2/
Enjoy!
Radomir
-7A Finish
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
atronics.com/Navigator?RVSouthEast-List
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
Thanks, Radomir!
I have to enjoy formation flying vicariously until my plane is flying again.
Ken
On 10/2/06, Radomir Zaric <vitez@carolina.rr.com> wrote:
>
> Here's the video from this Saturday. Hopefully all key elements were
> captured J
>
>
> http://www.youtube.com/watch?v=HAq_FE3gaic
>
>
> Radomir
>
>
> *
>
> *
>
>
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
--> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
Your wingman was right-on James. It helps that you
had a load, so keeping up, even w/ rust, was easier.
Kudos to Rad for great work, as usual. Just a reminder
after seeing those still pix, how 'bout let us censor
certain pix before they get to Doug Reeves site.
Don't wanna give Kahuna and the gang too much ammo for
the ' Wall of Shame' Anyone up for practice
Saturday after Stantons? If not, may opt out for
lunch. Smokey, let us know your return date so we can
plan Jackson County on 10/21. Maybe EAA 242 can
include that stop in their 'ooh and ahh flt. Reno
--- James Clark <jclarkmail@gmail.com> wrote:
> Yup ... except for when you forgot and fired the
> JATO bottles and left poor
> Tad in the dust! ;-)
>
> Of course, I am SURE I had MY wingman all over the
> place. :-)
>
> Again, a good time was had. We must do it more
> often.
>
> James
>
>
> James
>
>
> On 10/3/06, ronschreck@windstream.net
> <ronschreck@windstream.net> wrote:
> >
> > --> RVSouthEast-List message posted by:
> <ronschreck@windstream.net>
> >
> > Don't know what you are talking about, James. I
> was ALWAYS in perfect
> > formation! ;-)
> >
> > Smokey
> > "Lead"
> > >
> > > From: "James Clark" <jclarkmail@gmail.com>
> > > Date: 2006/10/02 Mon PM 11:58:22 EDT
> > > To: rvsoutheast-list@matronics.com
> > > Subject: Re: RVSouthEast-List: formation video
> > >
> > > Thanks Radomir!
> > >
> > > We obviously need more practice but I guess
> given the RUST that had
> > > developed from not having practiced in so long
> and the windiness (yeah,
> > > that's it, it was ahhh windy ... :-) ... it was
> a lot of fun.
> > >
> > > And the good lady at KLKR came through with the
> brats and burgers on the
> > > grill as usual!!
> > >
> > > If anyone is near Lancaster, SC, please stop in
> and get a few gallons of
> > gas
> > > (about the cheapest in SC) and help suppor the
> wonderful couple there
> > that
> > > always looks out for us!
> > >
> > > James
> > >
> > > On 10/2/06, Radomir Zaric
> <vitez@carolina.rr.com> wrote:
> > > >
> > > > Here's the video from this Saturday.
> Hopefully all key elements were
> > > > captured J
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > http://www.youtube.com/watch?v=HAq_FE3gaic
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Radomir
> > > >
> > > >
> > > >
> > > > *
> > > >
> > > >
> > > > *
> > > >
> > > >
> > >
> > >
> > > --
> > > This is an alternate email. Please continue to
> email me at
> > > james@nextupventures.com .
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
> --
> This is an alternate email. Please continue to email
> me at
> james@nextupventures.com .
>
__________________________________________________
protection around
__________________________________________________
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
--> RVSouthEast-List message posted by: "Radomir Zaric" <vitez@carolina.rr.com>
Appropriate steps will be taken.
Thanks!
Radomir
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of bill
crothers
Sent: Tuesday, October 03, 2006 4:58 PM
Subject: Re: Re: RVSouthEast-List: formation video
--> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
Your wingman was right-on James. It helps that you
had a load, so keeping up, even w/ rust, was easier.
Kudos to Rad for great work, as usual. Just a reminder
after seeing those still pix, how 'bout let us censor
certain pix before they get to Doug Reeves site.
Don't wanna give Kahuna and the gang too much ammo for
the ' Wall of Shame' Anyone up for practice
Saturday after Stantons? If not, may opt out for
lunch. Smokey, let us know your return date so we can
plan Jackson County on 10/21. Maybe EAA 242 can
include that stop in their 'ooh and ahh flt. Reno
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: formation video |
--> RVSouthEast-List message posted by: <ronschreck@windstream.net>
Hi all,
We're in Houston right now. Going to visit George & Becky Orndorff near Ft Worth
tomorrow, then on to Colorado. Plan to be back home on October 16th if all
goes as planned. I'll keep you posted.
Smokey do not archive
>
> From: "Radomir Zaric" <vitez@carolina.rr.com>
> Date: 2006/10/03 Tue PM 05:18:01 EDT
> To: <rvsoutheast-list@matronics.com>
> Subject: RE: Re: RVSouthEast-List: formation video
>
> --> RVSouthEast-List message posted by: "Radomir Zaric" <vitez@carolina.rr.com>
>
> Appropriate steps will be taken.
>
> Thanks!
> Radomir
>
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of bill
> crothers
> Sent: Tuesday, October 03, 2006 4:58 PM
> To: rvsoutheast-list@matronics.com
> Subject: Re: Re: RVSouthEast-List: formation video
>
> --> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
>
> Your wingman was right-on James. It helps that you
> had a load, so keeping up, even w/ rust, was easier.
> Kudos to Rad for great work, as usual. Just a reminder
> after seeing those still pix, how 'bout let us censor
> certain pix before they get to Doug Reeves site.
> Don't wanna give Kahuna and the gang too much ammo for
> the ' Wall of Shame' Anyone up for practice
> Saturday after Stantons? If not, may opt out for
> lunch. Smokey, let us know your return date so we can
> plan Jackson County on 10/21. Maybe EAA 242 can
> include that stop in their 'ooh and ahh flt. Reno
>
>
>
>
>
>
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Chapter 3 Flyin at Camden, SC (KCDN) this weekend ... |
There will be a flyin at KCDN of the Vintage Airplane Association (EAA
Chapter 3) this weekend (Sat and Sun).
Our Chapter (EAA 242) will be assisting with food on Saturday. I think the
SC Breakfast Club will be there on Sunday.
This would be a good place for the gang to stop by with an "arrival". :-)
On Saturday, there will be awards given in various aircraft categories.
See ya there???
James
--
This is an alternate email. Please continue to email me at
james@nextupventures.com .
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Assist requested |
--> RVSouthEast-List message posted by: "David Lee" <odlee@bellsouth.net>
I will be ready to rivet the HS skins this weekend. Since this is my first kit
and no other eyes have seen my work, I would appreciate a few hours of inspection
and rivet assist from any of you experienced builders. I will have the skeleton
completed before Sat AM.
I live in Greensboro and will pick you up at GSO (Atlantic Aero) if you choose
to fly. If you are local to Greensboro and want to drive I will forward directions.
Google maps can find the house @ 704 Seven Oaks Dr, GSO, 27410.
This is an RV-7 or 7A, still have not made up my mind!
Thanks,
David
336-852-7602
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=65602#65602
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | annual inspection |
--> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
Guys, I'm due for annual on my 8 this month. Since I
did not build it, I'm looking for a reputable A & P to
assist me. Any names would be appreciated. Reno
__________________________________________________
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: annual inspection |
John over in Camden would be a good guy.
He knows RVs and maintains an 8 for someone I know.
He is also the guy I go to when I need to change the engine mount isolators
on PJ.
James
... give me a call for more details.
On 10/3/06, bill crothers <bill28104@yahoo.com> wrote:
>
> --> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com
> >
>
> Guys, I'm due for annual on my 8 this month. Since I
> did not build it, I'm looking for a reputable A & P to
> assist me. Any names would be appreciated. Reno
>
> __________________________________________________
>
>
--
This is an alternate email. Please continue to email me at
james@nextupventures.com .
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | annual inspection |
Speaking of engine mount isolators.. James, you got Lords on PJ? Does the
orientation of the donut matter at all? One half of the donut is "silver
looking" while other looks gold in color.. does it matter which way they go?
Thanks!
Radomir
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of James
Clark
Sent: Tuesday, October 03, 2006 11:43 PM
Subject: Re: RVSouthEast-List: annual inspection
John over in Camden would be a good guy.
He knows RVs and maintains an 8 for someone I know.
He is also the guy I go to when I need to change the engine mount isolators
on PJ.
James
... give me a call for more details.
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: annual inspection |
Do you have CONICAL mounts?????
If so give me a call.
803-238-2113
James
On 10/3/06, Radomir Zaric <vitez@carolina.rr.com> wrote:
>
> Speaking of engine mount isolators.. James, you got Lords on PJ? Does
> the orientation of the donut matter at all? One half of the donut is
> "silver looking" while other looks gold in color.. does it matter which way
> they go?
>
>
> Thanks!
> Radomir
>
>
> ------------------------------
>
> *From:* owner-rvsoutheast-list-server@matronics.com [mailto:
> owner-rvsoutheast-list-server@matronics.com] *On Behalf Of *James Clark
> *Sent:* Tuesday, October 03, 2006 11:43 PM
> *To:* rvsoutheast-list@matronics.com
> *Subject:* Re: RVSouthEast-List: annual inspection
>
>
> John over in Camden would be a good guy.
>
> He knows RVs and maintains an 8 for someone I know.
>
> He is also the guy I go to when I need to change the engine mount
> isolators on PJ.
>
> James
> ... give me a call for more details.
>
> * *
>
> *
>
>
> *
>
>
--
This is an alternate email. Please continue to email me at
james@nextupventures.com .
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | annual inspection |
Mine are Dynafocal
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of James
Clark
Sent: Wednesday, October 04, 2006 12:15 AM
Subject: Re: RVSouthEast-List: annual inspection
Do you have CONICAL mounts?????
If so give me a call.
803-238-2113
James
On 10/3/06, Radomir Zaric < vitez@carolina.rr.com
<mailto:vitez@carolina.rr.com> > wrote:
Speaking of engine mount isolators.. James, you got Lords on PJ? Does the
orientation of the donut matter at all? One half of the donut is "silver
looking" while other looks gold in color.. does it matter which way they go?
Thanks!
Radomir
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of James
Clark
Sent: Tuesday, October 03, 2006 11:43 PM
Subject: Re: RVSouthEast-List: annual inspection
John over in Camden would be a good guy.
He knows RVs and maintains an 8 for someone I know.
He is also the guy I go to when I need to change the engine mount isolators
on PJ.
James
... give me a call for more details.
http://www.matronics.com/Navigator?RVSouthEast-List
http://forums.matronics.com
http://wiki.matronics.com
--
This is an alternate email. Please continue to email me at
james@nextupventures.com .
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: annual inspection |
I actually do not remember.
James
On 10/4/06, Radomir Zaric <vitez@carolina.rr.com> wrote:
>
> Mine are Dynafocal
>
>
> ------------------------------
>
> *From:* owner-rvsoutheast-list-server@matronics.com [mailto:
> owner-rvsoutheast-list-server@matronics.com] *On Behalf Of *James Clark
> *Sent:* Wednesday, October 04, 2006 12:15 AM
> *To:* rvsoutheast-list@matronics.com
> *Subject:* Re: RVSouthEast-List: annual inspection
>
>
> Do you have CONICAL mounts?????
>
> If so give me a call.
> 803-238-2113
>
> James
>
> On 10/3/06, *Radomir Zaric* < vitez@carolina.rr.com> wrote:
>
> Speaking of engine mount isolators.. James, you got Lords on PJ? Does the
> orientation of the donut matter at all? One half of the donut is "silver
> looking" while other looks gold in color.. does it matter which way they go?
>
>
> Thanks!
> Radomir
>
>
> ------------------------------
>
> *From:* owner-rvsoutheast-list-server@matronics.com [mailto:
> owner-rvsoutheast-list-server@matronics.com] *On Behalf Of *James Clark
> *Sent:* Tuesday, October 03, 2006 11:43 PM
> *To:* rvsoutheast-list@matronics.com
> *Subject:* Re: RVSouthEast-List: annual inspection
>
>
> John over in Camden would be a good guy.
>
> He knows RVs and maintains an 8 for someone I know.
>
> He is also the guy I go to when I need to change the engine mount
> isolators on PJ.
>
> James
> ... give me a call for more details.
>
> * *
>
> * *
>
> * *
>
> *http://www.matronics.com/Navigator?RVSouthEast-List*
>
> *http://forums.matronics.com*
>
> *http://wiki.matronics.com*
>
> *
>
>
> --
> This is an alternate email. Please continue to email me at james@nextupventures.com
.
>
> *
>
> * *
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> * *
>
> *
>
>
> *
>
>
--
This is an alternate email. Please continue to email me at
james@nextupventures.com .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|