---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Tue 10/03/06: 19 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:04 AM - Re: Re: formation video () 2. 05:18 AM - Re: Canopy Thanks (Randy Utsey) 3. 05:27 AM - Re: Re: formation video (James Clark) 4. 05:42 AM - Re: formation video (Lenleg@aol.com) 5. 05:42 AM - Re: formation video (tadsargent) 6. 05:42 AM - Re: Canopy Thanks (tadsargent) 7. 06:39 AM - Re: Canopy Thanks (Randy Utsey) 8. 06:50 AM - Re: formation video (Ken Harrill) 9. 01:58 PM - Re: Re: formation video (bill crothers) 10. 02:18 PM - Re: Re: formation video (Radomir Zaric) 11. 03:07 PM - Re: Re: formation video () 12. 03:10 PM - Chapter 3 Flyin at Camden, SC (KCDN) this weekend ... (James Clark) 13. 05:12 PM - Assist requested (David Lee) 14. 06:12 PM - annual inspection (bill crothers) 15. 08:43 PM - Re: annual inspection (James Clark) 16. 08:50 PM - Re: annual inspection (Radomir Zaric) 17. 09:15 PM - Re: annual inspection (James Clark) 18. 09:20 PM - Re: annual inspection (Radomir Zaric) 19. 10:27 PM - Re: annual inspection (James Clark) ________________________________ Message 1 _____________________________________ Time: 05:04:10 AM PST US From: Subject: Re: Re: RVSouthEast-List: formation video --> RVSouthEast-List message posted by: Don't know what you are talking about, James. I was ALWAYS in perfect formation! ;-) Smokey "Lead" > > From: "James Clark" > Date: 2006/10/02 Mon PM 11:58:22 EDT > To: rvsoutheast-list@matronics.com > Subject: Re: RVSouthEast-List: formation video > > Thanks Radomir! > > We obviously need more practice but I guess given the RUST that had > developed from not having practiced in so long and the windiness (yeah, > that's it, it was ahhh windy ... :-) ... it was a lot of fun. > > And the good lady at KLKR came through with the brats and burgers on the > grill as usual!! > > If anyone is near Lancaster, SC, please stop in and get a few gallons of gas > (about the cheapest in SC) and help suppor the wonderful couple there that > always looks out for us! > > James > > On 10/2/06, Radomir Zaric wrote: > > > > Here's the video from this Saturday. Hopefully all key elements were > > captured J > > > > > > > > > > > > http://www.youtube.com/watch?v=HAq_FE3gaic > > > > > > > > > > > > Radomir > > > > > > > > * > > > > > > * > > > > > > > -- > This is an alternate email. Please continue to email me at > james@nextupventures.com . > > ________________________________ Message 2 _____________________________________ Time: 05:18:42 AM PST US From: "Randy Utsey" Subject: Re: RVSouthEast-List: Canopy Thanks Well, we trimmed on the rear / how much edge clearance should you have for the plexiglass holes? Randy Utsey D.J. Distributing Co. 1429 Bryant St. Charlotte, NC 28208 800-585-4126 djdist@bellsouth.net www.djdist.com ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Monday, October 02, 2006 9:35 PM Subject: Re: RVSouthEast-List: Canopy Thanks Glad to help Randy. How was the rest of the trimming. ----- Original Message ----- From: Randy Utsey To: rvsoutheast-list@matronics.com Sent: Monday, October 02, 2006 10:15 AM Subject: RVSouthEast-List: Canopy Thanks Thank you Tad & Terrie Sargent & Steve Glasgow & Tim Bolton for cutting my canopy on Sunday. This was Tad's #4! We trimmed the rear section after you left Tad and now I will read the directions on what to do next. Thanks again, Randy Utsey RV-7 Tip up IO-360 MT-3 blade CS ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Sunday, October 01, 2006 8:02 PM Subject: Re: RVSouthEast-List: Photos from today Tim how was the rest of the canopy cutting? Did you get to cut anything? Sorry we needed to go but my outdoor project was beckoning. Read, my wife wanted me to finish it. Which we did not accomplish. Save for another day. ----- Original Message ----- From: Tim Bolton To: rvsoutheast-list@matronics.com Sent: Sunday, October 01, 2006 8:55 AM Subject: Re: RVSouthEast-List: Photos from today Very nice shots. I was hoping to bum a ride yesterday to get some air to air shots but I had a wedding to attend. Hopefully I can go next time. It looks like you have a little bit of dust or your sensor. Have you ever cleaned it? If not I would try using a rocket blower first, if that dosnt help then you may need to swab the sensor. I had to swab mine a few months back and it made a world of difference. Tim Bolton Charlotte, NC www.TheRV7.com ----- Original Message ----- From: Radomir Zaric To: rvsoutheast-list@matronics.com Sent: Saturday, September 30, 2006 10:20 PM Subject: RVSouthEast-List: Photos from today Hey guys, Here are photos from today's formation practice. it was hard to pick "only" this many for the web. http://www.vitez.net/formation/lkr2/ Enjoy! Radomir -7A Finish atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List ________________________________ Message 3 _____________________________________ Time: 05:27:37 AM PST US From: "James Clark" Subject: Re: Re: RVSouthEast-List: formation video Yup ... except for when you forgot and fired the JATO bottles and left poor Tad in the dust! ;-) Of course, I am SURE I had MY wingman all over the place. :-) Again, a good time was had. We must do it more often. James James On 10/3/06, ronschreck@windstream.net wrote: > > --> RVSouthEast-List message posted by: > > Don't know what you are talking about, James. I was ALWAYS in perfect > formation! ;-) > > Smokey > "Lead" > > > > From: "James Clark" > > Date: 2006/10/02 Mon PM 11:58:22 EDT > > To: rvsoutheast-list@matronics.com > > Subject: Re: RVSouthEast-List: formation video > > > > Thanks Radomir! > > > > We obviously need more practice but I guess given the RUST that had > > developed from not having practiced in so long and the windiness (yeah, > > that's it, it was ahhh windy ... :-) ... it was a lot of fun. > > > > And the good lady at KLKR came through with the brats and burgers on the > > grill as usual!! > > > > If anyone is near Lancaster, SC, please stop in and get a few gallons of > gas > > (about the cheapest in SC) and help suppor the wonderful couple there > that > > always looks out for us! > > > > James > > > > On 10/2/06, Radomir Zaric wrote: > > > > > > Here's the video from this Saturday. Hopefully all key elements were > > > captured J > > > > > > > > > > > > > > > > > > http://www.youtube.com/watch?v=HAq_FE3gaic > > > > > > > > > > > > > > > > > > Radomir > > > > > > > > > > > > * > > > > > > > > > * > > > > > > > > > > > > -- > > This is an alternate email. Please continue to email me at > > james@nextupventures.com . > > > > > > -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 4 _____________________________________ Time: 05:42:15 AM PST US From: Lenleg@aol.com Subject: Re: RVSouthEast-List: formation video Not bad guys after having not flown together for two months !!! Thanks for the filming Rad ! Len In a message dated 10/2/2006 10:51:59 P.M. Eastern Standard Time, vitez@carolina.rr.com writes: Here=99s the video from this Saturday. Hopefully all key elements we re captured J _http://www.youtube.com/watch?v=HAq_FE3gaic_ (http://www.youtube.com/watch?v=HAq_FE3gaic) Radomir (http://www.matronics.com/Navigator?RVSouthEast-List) (http://www.matronics.com/contribution) ________________________________ Message 5 _____________________________________ Time: 05:42:15 AM PST US From: "tadsargent" Subject: Re: RVSouthEast-List: formation video Guys we beat ourselves down a bit after practice but I think the video made us look goooood. We do have room to polish our act. Any other thoughts. Stripes ----- Original Message ----- From: Radomir Zaric To: rvsoutheast-list@matronics.com Sent: Monday, October 02, 2006 10:50 PM Subject: RVSouthEast-List: formation video Here's the video from this Saturday. Hopefully all key elements were captured J http://www.youtube.com/watch?v=HAq_FE3gaic Radomir ________________________________ Message 6 _____________________________________ Time: 05:42:57 AM PST US From: "tadsargent" Subject: Re: RVSouthEast-List: Canopy Thanks I'm not sure what section you are talking about. ----- Original Message ----- From: Randy Utsey To: rvsoutheast-list@matronics.com Sent: Tuesday, October 03, 2006 8:18 AM Subject: Re: RVSouthEast-List: Canopy Thanks Well, we trimmed on the rear / how much edge clearance should you have for the plexiglass holes? Randy Utsey D.J. Distributing Co. 1429 Bryant St. Charlotte, NC 28208 800-585-4126 djdist@bellsouth.net www.djdist.com ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Monday, October 02, 2006 9:35 PM Subject: Re: RVSouthEast-List: Canopy Thanks Glad to help Randy. How was the rest of the trimming. ----- Original Message ----- From: Randy Utsey To: rvsoutheast-list@matronics.com Sent: Monday, October 02, 2006 10:15 AM Subject: RVSouthEast-List: Canopy Thanks Thank you Tad & Terrie Sargent & Steve Glasgow & Tim Bolton for cutting my canopy on Sunday. This was Tad's #4! We trimmed the rear section after you left Tad and now I will read the directions on what to do next. Thanks again, Randy Utsey RV-7 Tip up IO-360 MT-3 blade CS ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Sunday, October 01, 2006 8:02 PM Subject: Re: RVSouthEast-List: Photos from today Tim how was the rest of the canopy cutting? Did you get to cut anything? Sorry we needed to go but my outdoor project was beckoning. Read, my wife wanted me to finish it. Which we did not accomplish. Save for another day. ----- Original Message ----- From: Tim Bolton To: rvsoutheast-list@matronics.com Sent: Sunday, October 01, 2006 8:55 AM Subject: Re: RVSouthEast-List: Photos from today Very nice shots. I was hoping to bum a ride yesterday to get some air to air shots but I had a wedding to attend. Hopefully I can go next time. It looks like you have a little bit of dust or your sensor. Have you ever cleaned it? If not I would try using a rocket blower first, if that dosnt help then you may need to swab the sensor. I had to swab mine a few months back and it made a world of difference. Tim Bolton Charlotte, NC www.TheRV7.com ----- Original Message ----- From: Radomir Zaric To: rvsoutheast-list@matronics.com Sent: Saturday, September 30, 2006 10:20 PM Subject: RVSouthEast-List: Photos from today Hey guys, Here are photos from today's formation practice. it was hard to pick "only" this many for the web. http://www.vitez.net/formation/lkr2/ Enjoy! Radomir -7A Finish atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List ________________________________ Message 7 _____________________________________ Time: 06:39:59 AM PST US From: "Randy Utsey" Subject: Re: RVSouthEast-List: Canopy Thanks There is 1 1/4" at the bottom where the roll bar is and a little more on the upper section / Steve & Tim, those side pieces we were looking for have to be made therefore we could not find them! Randy Utsey D.J. Distributing Co. 1429 Bryant St. Charlotte, NC 28208 800-585-4126 djdist@bellsouth.net www.djdist.com ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Tuesday, October 03, 2006 8:42 AM Subject: Re: RVSouthEast-List: Canopy Thanks I'm not sure what section you are talking about. ----- Original Message ----- From: Randy Utsey To: rvsoutheast-list@matronics.com Sent: Tuesday, October 03, 2006 8:18 AM Subject: Re: RVSouthEast-List: Canopy Thanks Well, we trimmed on the rear / how much edge clearance should you have for the plexiglass holes? Randy Utsey D.J. Distributing Co. 1429 Bryant St. Charlotte, NC 28208 800-585-4126 djdist@bellsouth.net www.djdist.com ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Monday, October 02, 2006 9:35 PM Subject: Re: RVSouthEast-List: Canopy Thanks Glad to help Randy. How was the rest of the trimming. ----- Original Message ----- From: Randy Utsey To: rvsoutheast-list@matronics.com Sent: Monday, October 02, 2006 10:15 AM Subject: RVSouthEast-List: Canopy Thanks Thank you Tad & Terrie Sargent & Steve Glasgow & Tim Bolton for cutting my canopy on Sunday. This was Tad's #4! We trimmed the rear section after you left Tad and now I will read the directions on what to do next. Thanks again, Randy Utsey RV-7 Tip up IO-360 MT-3 blade CS ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Sunday, October 01, 2006 8:02 PM Subject: Re: RVSouthEast-List: Photos from today Tim how was the rest of the canopy cutting? Did you get to cut anything? Sorry we needed to go but my outdoor project was beckoning. Read, my wife wanted me to finish it. Which we did not accomplish. Save for another day. ----- Original Message ----- From: Tim Bolton To: rvsoutheast-list@matronics.com Sent: Sunday, October 01, 2006 8:55 AM Subject: Re: RVSouthEast-List: Photos from today Very nice shots. I was hoping to bum a ride yesterday to get some air to air shots but I had a wedding to attend. Hopefully I can go next time. It looks like you have a little bit of dust or your sensor. Have you ever cleaned it? If not I would try using a rocket blower first, if that dosnt help then you may need to swab the sensor. I had to swab mine a few months back and it made a world of difference. Tim Bolton Charlotte, NC www.TheRV7.com ----- Original Message ----- From: Radomir Zaric To: rvsoutheast-list@matronics.com Sent: Saturday, September 30, 2006 10:20 PM Subject: RVSouthEast-List: Photos from today Hey guys, Here are photos from today's formation practice. it was hard to pick "only" this many for the web. http://www.vitez.net/formation/lkr2/ Enjoy! Radomir -7A Finish atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List atronics.com/Navigator?RVSouthEast-List ________________________________ Message 8 _____________________________________ Time: 06:50:05 AM PST US From: "Ken Harrill" Subject: Re: RVSouthEast-List: formation video Thanks, Radomir! I have to enjoy formation flying vicariously until my plane is flying again. Ken On 10/2/06, Radomir Zaric wrote: > > Here's the video from this Saturday. Hopefully all key elements were > captured J > > > http://www.youtube.com/watch?v=HAq_FE3gaic > > > Radomir > > > * > > * > > ________________________________ Message 9 _____________________________________ Time: 01:58:41 PM PST US From: bill crothers Subject: Re: Re: RVSouthEast-List: formation video --> RVSouthEast-List message posted by: bill crothers Your wingman was right-on James. It helps that you had a load, so keeping up, even w/ rust, was easier. Kudos to Rad for great work, as usual. Just a reminder after seeing those still pix, how 'bout let us censor certain pix before they get to Doug Reeves site. Don't wanna give Kahuna and the gang too much ammo for the ' Wall of Shame' Anyone up for practice Saturday after Stantons? If not, may opt out for lunch. Smokey, let us know your return date so we can plan Jackson County on 10/21. Maybe EAA 242 can include that stop in their 'ooh and ahh flt. Reno --- James Clark wrote: > Yup ... except for when you forgot and fired the > JATO bottles and left poor > Tad in the dust! ;-) > > Of course, I am SURE I had MY wingman all over the > place. :-) > > Again, a good time was had. We must do it more > often. > > James > > > James > > > On 10/3/06, ronschreck@windstream.net > wrote: > > > > --> RVSouthEast-List message posted by: > > > > > Don't know what you are talking about, James. I > was ALWAYS in perfect > > formation! ;-) > > > > Smokey > > "Lead" > > > > > > From: "James Clark" > > > Date: 2006/10/02 Mon PM 11:58:22 EDT > > > To: rvsoutheast-list@matronics.com > > > Subject: Re: RVSouthEast-List: formation video > > > > > > Thanks Radomir! > > > > > > We obviously need more practice but I guess > given the RUST that had > > > developed from not having practiced in so long > and the windiness (yeah, > > > that's it, it was ahhh windy ... :-) ... it was > a lot of fun. > > > > > > And the good lady at KLKR came through with the > brats and burgers on the > > > grill as usual!! > > > > > > If anyone is near Lancaster, SC, please stop in > and get a few gallons of > > gas > > > (about the cheapest in SC) and help suppor the > wonderful couple there > > that > > > always looks out for us! > > > > > > James > > > > > > On 10/2/06, Radomir Zaric > wrote: > > > > > > > > Here's the video from this Saturday. > Hopefully all key elements were > > > > captured J > > > > > > > > > > > > > > > > > > > > > > > > http://www.youtube.com/watch?v=HAq_FE3gaic > > > > > > > > > > > > > > > > > > > > > > > > Radomir > > > > > > > > > > > > > > > > * > > > > > > > > > > > > * > > > > > > > > > > > > > > > > > -- > > > This is an alternate email. Please continue to > email me at > > > james@nextupventures.com . > > > > > > > > > > > > > > > > > > > > > -- > This is an alternate email. Please continue to email > me at > james@nextupventures.com . > __________________________________________________ protection around __________________________________________________ ________________________________ Message 10 ____________________________________ Time: 02:18:11 PM PST US From: "Radomir Zaric" Subject: RE: Re: RVSouthEast-List: formation video --> RVSouthEast-List message posted by: "Radomir Zaric" Appropriate steps will be taken. Thanks! Radomir -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of bill crothers Sent: Tuesday, October 03, 2006 4:58 PM Subject: Re: Re: RVSouthEast-List: formation video --> RVSouthEast-List message posted by: bill crothers Your wingman was right-on James. It helps that you had a load, so keeping up, even w/ rust, was easier. Kudos to Rad for great work, as usual. Just a reminder after seeing those still pix, how 'bout let us censor certain pix before they get to Doug Reeves site. Don't wanna give Kahuna and the gang too much ammo for the ' Wall of Shame' Anyone up for practice Saturday after Stantons? If not, may opt out for lunch. Smokey, let us know your return date so we can plan Jackson County on 10/21. Maybe EAA 242 can include that stop in their 'ooh and ahh flt. Reno ________________________________ Message 11 ____________________________________ Time: 03:07:37 PM PST US From: Subject: RE: Re: RVSouthEast-List: formation video --> RVSouthEast-List message posted by: Hi all, We're in Houston right now. Going to visit George & Becky Orndorff near Ft Worth tomorrow, then on to Colorado. Plan to be back home on October 16th if all goes as planned. I'll keep you posted. Smokey do not archive > > From: "Radomir Zaric" > Date: 2006/10/03 Tue PM 05:18:01 EDT > To: > Subject: RE: Re: RVSouthEast-List: formation video > > --> RVSouthEast-List message posted by: "Radomir Zaric" > > Appropriate steps will be taken. > > Thanks! > Radomir > > > -----Original Message----- > From: owner-rvsoutheast-list-server@matronics.com > [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of bill > crothers > Sent: Tuesday, October 03, 2006 4:58 PM > To: rvsoutheast-list@matronics.com > Subject: Re: Re: RVSouthEast-List: formation video > > --> RVSouthEast-List message posted by: bill crothers > > Your wingman was right-on James. It helps that you > had a load, so keeping up, even w/ rust, was easier. > Kudos to Rad for great work, as usual. Just a reminder > after seeing those still pix, how 'bout let us censor > certain pix before they get to Doug Reeves site. > Don't wanna give Kahuna and the gang too much ammo for > the ' Wall of Shame' Anyone up for practice > Saturday after Stantons? If not, may opt out for > lunch. Smokey, let us know your return date so we can > plan Jackson County on 10/21. Maybe EAA 242 can > include that stop in their 'ooh and ahh flt. Reno > > > > > > > > ________________________________ Message 12 ____________________________________ Time: 03:10:46 PM PST US From: "James Clark" Subject: RVSouthEast-List: Chapter 3 Flyin at Camden, SC (KCDN) this weekend ... There will be a flyin at KCDN of the Vintage Airplane Association (EAA Chapter 3) this weekend (Sat and Sun). Our Chapter (EAA 242) will be assisting with food on Saturday. I think the SC Breakfast Club will be there on Sunday. This would be a good place for the gang to stop by with an "arrival". :-) On Saturday, there will be awards given in various aircraft categories. See ya there??? James -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 13 ____________________________________ Time: 05:12:09 PM PST US Subject: RVSouthEast-List: Assist requested From: "David Lee" --> RVSouthEast-List message posted by: "David Lee" I will be ready to rivet the HS skins this weekend. Since this is my first kit and no other eyes have seen my work, I would appreciate a few hours of inspection and rivet assist from any of you experienced builders. I will have the skeleton completed before Sat AM. I live in Greensboro and will pick you up at GSO (Atlantic Aero) if you choose to fly. If you are local to Greensboro and want to drive I will forward directions. Google maps can find the house @ 704 Seven Oaks Dr, GSO, 27410. This is an RV-7 or 7A, still have not made up my mind! Thanks, David 336-852-7602 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=65602#65602 ________________________________ Message 14 ____________________________________ Time: 06:12:37 PM PST US From: bill crothers Subject: RVSouthEast-List: annual inspection --> RVSouthEast-List message posted by: bill crothers Guys, I'm due for annual on my 8 this month. Since I did not build it, I'm looking for a reputable A & P to assist me. Any names would be appreciated. Reno __________________________________________________ ________________________________ Message 15 ____________________________________ Time: 08:43:13 PM PST US From: "James Clark" Subject: Re: RVSouthEast-List: annual inspection John over in Camden would be a good guy. He knows RVs and maintains an 8 for someone I know. He is also the guy I go to when I need to change the engine mount isolators on PJ. James ... give me a call for more details. On 10/3/06, bill crothers wrote: > > --> RVSouthEast-List message posted by: bill crothers > > > Guys, I'm due for annual on my 8 this month. Since I > did not build it, I'm looking for a reputable A & P to > assist me. Any names would be appreciated. Reno > > __________________________________________________ > > -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 16 ____________________________________ Time: 08:50:47 PM PST US From: "Radomir Zaric" Subject: RE: RVSouthEast-List: annual inspection Speaking of engine mount isolators.. James, you got Lords on PJ? Does the orientation of the donut matter at all? One half of the donut is "silver looking" while other looks gold in color.. does it matter which way they go? Thanks! Radomir _____ From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of James Clark Sent: Tuesday, October 03, 2006 11:43 PM Subject: Re: RVSouthEast-List: annual inspection John over in Camden would be a good guy. He knows RVs and maintains an 8 for someone I know. He is also the guy I go to when I need to change the engine mount isolators on PJ. James ... give me a call for more details. ________________________________ Message 17 ____________________________________ Time: 09:15:42 PM PST US From: "James Clark" Subject: Re: RVSouthEast-List: annual inspection Do you have CONICAL mounts????? If so give me a call. 803-238-2113 James On 10/3/06, Radomir Zaric wrote: > > Speaking of engine mount isolators.. James, you got Lords on PJ? Does > the orientation of the donut matter at all? One half of the donut is > "silver looking" while other looks gold in color.. does it matter which way > they go? > > > Thanks! > Radomir > > > ------------------------------ > > *From:* owner-rvsoutheast-list-server@matronics.com [mailto: > owner-rvsoutheast-list-server@matronics.com] *On Behalf Of *James Clark > *Sent:* Tuesday, October 03, 2006 11:43 PM > *To:* rvsoutheast-list@matronics.com > *Subject:* Re: RVSouthEast-List: annual inspection > > > John over in Camden would be a good guy. > > He knows RVs and maintains an 8 for someone I know. > > He is also the guy I go to when I need to change the engine mount > isolators on PJ. > > James > ... give me a call for more details. > > * * > > * > > > * > > -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 18 ____________________________________ Time: 09:20:06 PM PST US From: "Radomir Zaric" Subject: RE: RVSouthEast-List: annual inspection Mine are Dynafocal _____ From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of James Clark Sent: Wednesday, October 04, 2006 12:15 AM Subject: Re: RVSouthEast-List: annual inspection Do you have CONICAL mounts????? If so give me a call. 803-238-2113 James On 10/3/06, Radomir Zaric < vitez@carolina.rr.com > wrote: Speaking of engine mount isolators.. James, you got Lords on PJ? Does the orientation of the donut matter at all? One half of the donut is "silver looking" while other looks gold in color.. does it matter which way they go? Thanks! Radomir _____ From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of James Clark Sent: Tuesday, October 03, 2006 11:43 PM Subject: Re: RVSouthEast-List: annual inspection John over in Camden would be a good guy. He knows RVs and maintains an 8 for someone I know. He is also the guy I go to when I need to change the engine mount isolators on PJ. James ... give me a call for more details. http://www.matronics.com/Navigator?RVSouthEast-List http://forums.matronics.com http://wiki.matronics.com -- This is an alternate email. Please continue to email me at james@nextupventures.com . ________________________________ Message 19 ____________________________________ Time: 10:27:19 PM PST US From: "James Clark" Subject: Re: RVSouthEast-List: annual inspection I actually do not remember. James On 10/4/06, Radomir Zaric wrote: > > Mine are Dynafocal > > > ------------------------------ > > *From:* owner-rvsoutheast-list-server@matronics.com [mailto: > owner-rvsoutheast-list-server@matronics.com] *On Behalf Of *James Clark > *Sent:* Wednesday, October 04, 2006 12:15 AM > *To:* rvsoutheast-list@matronics.com > *Subject:* Re: RVSouthEast-List: annual inspection > > > Do you have CONICAL mounts????? > > If so give me a call. > 803-238-2113 > > James > > On 10/3/06, *Radomir Zaric* < vitez@carolina.rr.com> wrote: > > Speaking of engine mount isolators.. James, you got Lords on PJ? Does the > orientation of the donut matter at all? One half of the donut is "silver > looking" while other looks gold in color.. does it matter which way they go? > > > Thanks! > Radomir > > > ------------------------------ > > *From:* owner-rvsoutheast-list-server@matronics.com [mailto: > owner-rvsoutheast-list-server@matronics.com] *On Behalf Of *James Clark > *Sent:* Tuesday, October 03, 2006 11:43 PM > *To:* rvsoutheast-list@matronics.com > *Subject:* Re: RVSouthEast-List: annual inspection > > > John over in Camden would be a good guy. > > He knows RVs and maintains an 8 for someone I know. > > He is also the guy I go to when I need to change the engine mount > isolators on PJ. > > James > ... give me a call for more details. > > * * > > * * > > * * > > *http://www.matronics.com/Navigator?RVSouthEast-List* > > *http://forums.matronics.com* > > *http://wiki.matronics.com* > > * > > > -- > This is an alternate email. Please continue to email me at james@nextupventures.com .. > > * > > * * > > * * > > * * > > ** > > ** > > ** > > ** > > ** > > ** > > ** > > ** > > ** > > *http://www.matronics.com/contribution* > > * * > > * > > > * > > -- This is an alternate email. Please continue to email me at james@nextupventures.com .