Today's Message Index:
----------------------
1. 04:27 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (dwmillsap@netzero.net)
2. 05:28 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Steve Glasgow)
3. 06:20 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Bill Repucci)
4. 08:40 AM - Re: SERV Shirts, Hats, T-Shirts (Lenleg@aol.com)
5. 08:44 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen)
6. 08:48 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen)
7. 10:17 AM - Re: SERV Shirts, Hats, T-Shirts (Robbie Walker)
8. 10:21 AM - Re: Trip of Trips (DOUGPFLYRV@aol.com)
9. 10:22 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Dale Ensing)
10. 10:55 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Paul D. Franzon)
11. 02:37 PM - Drill bits (Craig)
12. 02:44 PM - Re: Drill bits (Radomir Zaric)
13. 04:17 PM - Re: Drill bits (Craig)
14. 04:35 PM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen)
15. 04:53 PM - Re: Trip of Trips (Larry Bowen)
16. 05:14 PM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen)
17. 05:32 PM - Re: Drill bits (Ed Anderson)
18. 05:38 PM - Re: Trip of Trips (bill crothers)
19. 05:57 PM - Re: Trip of Trips (Larry Bowen)
20. 06:38 PM - Re: Trip of Trips (TWOBARBEE@wmconnect.com)
21. 06:44 PM - Re: Drill bits (tadsargent)
22. 08:56 PM - Re: Drill bits (ben burril)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th |
Yes, Dennis is committed to this event...he had obligated himself to be
there before the list discussion due to his connection through the unive
rsity or the local EAA chapter (I don't know which). Anyway, he has alre
ady arranged to deliver his plane on Friday with me as ground crew, then
pick it up on Sunday with someone else driving him down. Count on him t
o be there.
You can email him at millsapd@ecu.edu if you want to discuss specifics,
or call him at work at 252-328-6597.
Lori
-- "Larry Bowen" <Larry@bowenaero.com> wrote:
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.c
om>
In response to the email below, the following folks showed an interest b
ack
in August:
Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Pa
ul
D. Franzon & Len Leggette.
We are less than a month away now. Is everyone still in?
I have a slight complication in that my conditional inspection is due by
then end of Oct, so unless I get cracking on it, my plane will likely be
in
pieces in November.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
========================
========
Aug 5th:
I got a call from the FAA the other day. Before I could voice my alibi,
he
told me it was regarding the Wings Weekend on November 4th at Goldsboro,
NC.
He's looking for a couple volunteers to do presentation on the RV's and
what
it takes to build and fly them. Sort of like the presentation Len and I
did
for the Winston-Salem airport group a couple months ago. I told him I wo
uld
ask the group if anyone was available/interested. It would be a 40-50
minute presentation in a classroom type environment. Maybe a slideshow,
questions from the attendees, etc. I'm thinking 3-4 people who are well
into their kit or flying would be good.
Who would be willing to participate?
-LB
========================
===========
========================
===========
========================
===========
========================
===========
========================
===========
<html><P>Yes, Dennis is committed to this event...he had obligated himse
lf to be there before the list discussion due to his connection through
the university or the local EAA chapter (I don't know which). Anyway, he
has already arranged to deliver his plane on Friday with me as ground c
rew, then pick it up on Sunday with someone else driving him down. Count
on him to be there.</P>
<P>You can email him at <A href="mailto:millsapd@ecu.edu">millsapd@ecu
.edu</A> if you want to discuss specifics, or call him at work at 252-32
8-6597.</P>
<P>Lori<BR><BR>-- "Larry Bowen" <Larry@bowenaero.com&g
t; wrote:<BR>--> RVSouthEast-List message posted&
nbsp;by: "Larry Bowen" <Larry@BowenAero.com><BR><BR
>In response to the email below, the
following folks showed an interest back<BR>in&n
bsp;August:<BR><BR>Bill Repucci, Ron Schreck, Steve&
nbsp;Glasgow, Denis Millsap, Dale Ensing, Paul<
BR>D. Franzon & Len Leggette.<BR><BR>We are
less than a month away now. Is
everyone still in?<BR><BR>I have a slight
complication in that my conditional inspe
ction is due by<BR>then end of Oct, s
o unless I get cracking on it, my&nbs
p;plane will likely be in<BR>pieces in Nov
ember.<BR><BR>-<BR>Larry Bowen<BR>Larry@BowenAero.com<BR>http://Bow
enAero.com<BR><BR>==================
===============<BR><BR>Aug 5th:<BR><B
R>I got a call from the FAA the
other day. Before I could voice my al
ibi, he<BR>told me it was regarding the&nb
sp;Wings Weekend on November 4th at Goldsb
oro, NC.<BR>He's looking for a couple volu
nteers to do presentation on the RV's 
;and what<BR>it takes to build and fly&nbs
p;them. Sort of like the presentation Len&
nbsp;and I did<BR>for the Winston-Salem airport
group a couple months ago. I told&nb
sp;him I would<BR>ask the group if anyone&
nbsp;was available/interested. It would be a&nb
sp;40-50<BR>minute presentation in a classroom
type environment. Maybe a slideshow,<BR>questions&nb
sp;from the attendees, etc. I'm thinking 3
-4 people who are well<BR>into their kit&n
bsp;or flying would be good.<BR><BR>Who would&n
========================
========================
- The RVSouthEast-List Emai
many List utilities such as the Subscripti
========================
========================
- NEW MATRONIC
now also available via the Web Forum
========================
sp; - NEW 
nfo to the Matronics Email List Wiki!<BR>_
========================
========================
- List Contribution&
p; &nbs
p; &nbs
========================
========================
=======<BR></P>
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th |
There is an event for aircraft owners at JQF so I'm out.
Cappy
----- Original Message -----
From: Larry Bowen
To: rvsoutheast-list@matronics.com
Sent: Saturday, October 07, 2006 10:11 PM
Subject: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov
4th
--> RVSouthEast-List message posted by: "Larry Bowen"
<Larry@BowenAero.com>
In response to the email below, the following folks showed an interest
back
in August:
Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing,
Paul
D. Franzon & Len Leggette.
We are less than a month away now. Is everyone still in?
I have a slight complication in that my conditional inspection is due
by
then end of Oct, so unless I get cracking on it, my plane will likely
be in
pieces in November.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
=======
Aug 5th:
I got a call from the FAA the other day. Before I could voice my
alibi, he
told me it was regarding the Wings Weekend on November 4th at
Goldsboro, NC.
He's looking for a couple volunteers to do presentation on the RV's
and what
it takes to build and fly them. Sort of like the presentation Len and
I did
for the Winston-Salem airport group a couple months ago. I told him I
would
ask the group if anyone was available/interested. It would be a 40-50
minute presentation in a classroom type environment. Maybe a
slideshow,
questions from the attendees, etc. I'm thinking 3-4 people who are
well
into their kit or flying would be good.
Who would be willing to participate?
-LB
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Goldsboro Wings Weekend, RV Seminar, Nov 4th |
Now that we are still "in", what would you like us to talk about and
what is the format?
Since I'm still building I thought I could talk for about 15 minutes on
the following:
- Selecting and setting up your shop
- Finding time to build
- involving your spouse and kids
- Selecting options and the impact to your budget (Time and $$$)
- Keeping motivated
- Safety precautions while building
- Resources (Local help, books and web sites)
- Having fun while building
(That seems like a lot but it will go quick)
That will leave technical stuff to the Tech counselors.
Will you have an overhead projector and computer available? If not I
can bring handouts to cover the bullet items listed above.
Bill R.
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
dwmillsap@netzero.net
Sent: Sunday, October 08, 2006 7:26 AM
Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov
4th
Yes, Dennis is committed to this event...he had obligated himself to be
there before the list discussion due to his connection through the
university or the local EAA chapter (I don't know which). Anyway, he has
already arranged to deliver his plane on Friday with me as ground crew,
then pick it up on Sunday with someone else driving him down. Count on
him to be there.
You can email him at millsapd@ecu.edu if you want to discuss specifics,
or call him at work at 252-328-6597.
Lori
-- "Larry Bowen" <Larry@bowenaero.com> wrote:
--> RVSouthEast-List message posted by: "Larry Bowen"
<Larry@BowenAero.com>
In response to the email below, the following folks showed an interest
back
in August:
Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing,
Paul
D. Franzon & Len Leggette.
We are less than a month away now. Is everyone still in?
I have a slight complication in that my conditional inspection is due by
then end of Oct, so unless I get cracking on it, my plane will likely be
in
pieces in November.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
================================
Aug 5th:
I got a call from the FAA the other day. Before I could voice my alibi,
he
told me it was regarding the Wings Weekend on November 4th at Goldsboro,
NC.
He's looking for a couple volunteers to do presentation on the RV's and
what
it takes to build and fly them. Sort of like the presentation Len and I
did
for the Winston-Salem airport group a couple months ago. I told him I
would
ask the group if anyone was available/interested. It would be a 40-50
minute presentation in a classroom type environment. Maybe a slideshow,
questions from the attendees, etc. I'm thinking 3-4 people who are well
into their kit or flying would be good.
Who would&n================================================ - The
RVSouthEast-List Emaimany List utilities such as the
Subscripti================================================ - NEW
MATRONIC now also available via the Web Forum========================sp;
- NEW nfo to the Matronics Email List Wiki!
_================================================ - List
Contribution&p;
&nbs======================================================
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: SERV Shirts, Hats, T-Shirts |
In a message dated 10/7/2006 1:16:16 P.M. Eastern Standard Time,
robbie@atlanticpkg.com writes:
If you do a run you can count on me for at least 2 hats... but I doubt that
you're going to run 3X tee-shirts, huh?
Robbie Walker
It will all be special order ... you can get whatever size you would like !!!
Len
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Goldsboro Wings Weekend, RV Seminar, Nov 4th |
We've sort of been given a blank slate as far as the format and content
goes. We need to decide what to discuss and divvy things up accordingly.
You list some great points below and we can build upon those. Another one I
remember from when we first discussed this in August, is Paul's point of
view as buyer rather than builder. Some others off the top of my head might
be painting, ongoing maintenance, insurance, tailwheel/tricycle, liability
when selling, etc, etc.
The link below is a copy of the slideshow Len & I gave to the Winston-Salem
Aviation Assoc last year. It loosely chronicles my six years building. I
sort of winged the verbiage behind each slide. The presentation was well
received. We can use the format as a template, or not.
http://picasaweb.google.com/lcbowen/RVPresentation
I plan to have a laptop there, and was told a PC projector will be made
available as well.
All ideas and input are welcome.
-
Larry Bowen, RV-8 233 Hrs.
Larry@BowenAero.com
<http://bowenaero.com/> http://BowenAero.com
_____
From: Bill Repucci [mailto:bill@repucci.com]
Sent: Sunday, October 08, 2006 9:21 AM
Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
Now that we are still "in", what would you like us to talk about and what is
the format?
Since I'm still building I thought I could talk for about 15 minutes on the
following:
- Selecting and setting up your shop
- Finding time to build
- involving your spouse and kids
- Selecting options and the impact to your budget (Time and $$$)
- Keeping motivated
- Safety precautions while building
- Resources (Local help, books and web sites)
- Having fun while building
(That seems like a lot but it will go quick)
That will leave technical stuff to the Tech counselors.
Will you have an overhead projector and computer available? If not I can
bring handouts to cover the bullet items listed above.
Bill R.
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
dwmillsap@netzero.net
Sent: Sunday, October 08, 2006 7:26 AM
Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
Yes, Dennis is committed to this event...he had obligated himself to be
there before the list discussion due to his connection through the
university or the local EAA chapter (I don't know which). Anyway, he has
already arranged to deliver his plane on Friday with me as ground crew, then
pick it up on Sunday with someone else driving him down. Count on him to be
there.
You can email him at millsapd@ecu.edu if you want to discuss specifics, or
call him at work at 252-328-6597.
Lori
-- "Larry Bowen" <Larry@bowenaero.com> wrote:
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
In response to the email below, the following folks showed an interest back
in August:
Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul
D. Franzon & Len Leggette.
We are less than a month away now. Is everyone still in?
I have a slight complication in that my conditional inspection is due by
then end of Oct, so unless I get cracking on it, my plane will likely be in
pieces in November.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
================================
Aug 5th:
I got a call from the FAA the other day. Before I could voice my alibi, he
told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC.
He's looking for a couple volunteers to do presentation on the RV's and what
it takes to build and fly them. Sort of like the presentation Len and I did
for the Winston-Salem airport group a couple months ago. I told him I would
ask the group if anyone was available/interested. It would be a 40-50
minute presentation in a classroom type environment. Maybe a slideshow,
questions from the attendees, etc. I'm thinking 3-4 people who are well
into their kit or flying would be good.
Who would&n======================= - The RVSouthEast-List Emaimany List
utilities such as the Subscripti======================= - NEW
MATRONIC now also available via the Web Forum========================sp;
- NEW nfo to the Matronics Email List Wiki!
_======================= - List Contribution&p;
&nbs=============================
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron
ics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://wiki.matronics.com">http://wiki.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Goldsboro Wings Weekend, RV Seminar, Nov 4th |
Another thing we did was show a Ed Hicks photo slideshow before and after
the "feature presenation" (with his blessing). That went over well too....
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com <http://bowenaero.com/>
_____
From: Larry Bowen [mailto:Larry@bowenaero.com]
Sent: Sunday, October 08, 2006 11:44 AM
Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
We've sort of been given a blank slate as far as the format and content
goes. We need to decide what to discuss and divvy things up accordingly.
You list some great points below and we can build upon those. Another one I
remember from when we first discussed this in August, is Paul's point of
view as buyer rather than builder. Some others off the top of my head might
be painting, ongoing maintenance, insurance, tailwheel/tricycle, liability
when selling, etc, etc.
The link below is a copy of the slideshow Len & I gave to the Winston-Salem
Aviation Assoc last year. It loosely chronicles my six years building. I
sort of winged the verbiage behind each slide. The presentation was well
received. We can use the format as a template, or not.
http://picasaweb.google.com/lcbowen/RVPresentation
I plan to have a laptop there, and was told a PC projector will be made
available as well.
All ideas and input are welcome.
-
Larry Bowen, RV-8 233 Hrs.
Larry@BowenAero.com
<http://bowenaero.com/> http://BowenAero.com
_____
From: Bill Repucci [mailto:bill@repucci.com]
Sent: Sunday, October 08, 2006 9:21 AM
Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
Now that we are still "in", what would you like us to talk about and what is
the format?
Since I'm still building I thought I could talk for about 15 minutes on the
following:
- Selecting and setting up your shop
- Finding time to build
- involving your spouse and kids
- Selecting options and the impact to your budget (Time and $$$)
- Keeping motivated
- Safety precautions while building
- Resources (Local help, books and web sites)
- Having fun while building
(That seems like a lot but it will go quick)
That will leave technical stuff to the Tech counselors.
Will you have an overhead projector and computer available? If not I can
bring handouts to cover the bullet items listed above.
Bill R.
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
dwmillsap@netzero.net
Sent: Sunday, October 08, 2006 7:26 AM
Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
Yes, Dennis is committed to this event...he had obligated himself to be
there before the list discussion due to his connection through the
university or the local EAA chapter (I don't know which). Anyway, he has
already arranged to deliver his plane on Friday with me as ground crew, then
pick it up on Sunday with someone else driving him down. Count on him to be
there.
You can email him at millsapd@ecu.edu if you want to discuss specifics, or
call him at work at 252-328-6597.
Lori
-- "Larry Bowen" <Larry@bowenaero.com> wrote:
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
In response to the email below, the following folks showed an interest back
in August:
Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul
D. Franzon & Len Leggette.
We are less than a month away now. Is everyone still in?
I have a slight complication in that my conditional inspection is due by
then end of Oct, so unless I get cracking on it, my plane will likely be in
pieces in November.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
================================
Aug 5th:
I got a call from the FAA the other day. Before I could voice my alibi, he
told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC.
He's looking for a couple volunteers to do presentation on the RV's and what
it takes to build and fly them. Sort of like the presentation Len and I did
for the Winston-Salem airport group a couple months ago. I told him I would
ask the group if anyone was available/interested. It would be a 40-50
minute presentation in a classroom type environment. Maybe a slideshow,
questions from the attendees, etc. I'm thinking 3-4 people who are well
into their kit or flying would be good.
Who would&n======================= - The RVSouthEast-List Emaimany List
utilities such as the Subscripti======================= - NEW
MATRONIC now also available via the Web Forum========================sp;
- NEW nfo to the Matronics Email List Wiki!
_======================= - List Contribution&p;
&nbs=============================
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron
ics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://wiki.matronics.com">http://wiki.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron
ics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://wiki.matronics.com">http://wiki.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: SERV Shirts, Hats, T-Shirts |
Well, then I'm in four a few shirts too, tee-shirts & collared.
FYI, folks, I completed my flight review and medical renewal last
week, so it's back to renting Skyhawks for the time being.
Robbie
On Oct 8, 2006, at 11:39 AM, Lenleg@aol.com wrote:
> In a message dated 10/7/2006 1:16:16 P.M. Eastern Standard Time,
> robbie@atlanticpkg.com writes:
> If you do a run you can count on me for at least 2 hats... but I
> doubt that you're going to run 3X tee-shirts, huh?
>
> Robbie Walker
>
> It will all be special order ... you can get whatever size you
> would like !!!
>
> Len
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Trip of Trips |
I am hoping to go west next Sept. to Van's homecoming plus the other
interesting stops. Plan on 2 weeks. Anyone interested in that time frame?
Doug Preston
BHM
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th |
--> RVSouthEast-List message posted by: "Dale Ensing" <densing@carolina.rr.com>
Sorry Larry,
There has been a little change in my plans. I am now scheduled for surgery
on Nov 2nd. Will be in hospital 3 or 4 days then out of action for two
weeks. After that ????
Dale Ensing
----- Original Message -----
From: "Larry Bowen" <Larry@bowenaero.com>
Sent: Saturday, October 07, 2006 10:11 PM
Subject: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
> --> RVSouthEast-List message posted by: "Larry Bowen"
<Larry@BowenAero.com>
>
> In response to the email below, the following folks showed an interest
back
> in August:
>
> Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul
> D. Franzon & Len Leggette.
>
> We are less than a month away now. Is everyone still in?
>
> I have a slight complication in that my conditional inspection is due by
> then end of Oct, so unless I get cracking on it, my plane will likely be
in
> pieces in November.
>
> -
> Larry Bowen
> Larry@BowenAero.com
> http://BowenAero.com
>
> ================================
>
> Aug 5th:
>
> I got a call from the FAA the other day. Before I could voice my alibi, he
> told me it was regarding the Wings Weekend on November 4th at Goldsboro,
NC.
> He's looking for a couple volunteers to do presentation on the RV's and
what
> it takes to build and fly them. Sort of like the presentation Len and I
did
> for the Winston-Salem airport group a couple months ago. I told him I
would
> ask the group if anyone was available/interested. It would be a 40-50
> minute presentation in a classroom type environment. Maybe a slideshow,
> questions from the attendees, etc. I'm thinking 3-4 people who are well
> into their kit or flying would be good.
>
> Who would be willing to participate?
>
> -LB
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Goldsboro Wings Weekend, RV Seminar, Nov 4th |
I hope to still make it. I will be in CA that week and my schedule is not
finalized yet.
Paul D. Franzon
Alumni Distinguished Professor of ECE,
443 Monteith GRC
ECE, Box 7911, Raleigh, NC 27695
MRC 223, 2410 Campus Shore Dr., Raleigh NC 27604
paulf@ncsu.edu , www.ece.ncsu.edu/erl/faculty/paulf.html
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Larry
Bowen
Sent: Sunday, October 08, 2006 11:44 AM
Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
We've sort of been given a blank slate as far as the format and content
goes. We need to decide what to discuss and divvy things up accordingly.
You list some great points below and we can build upon those. Another one I
remember from when we first discussed this in August, is Paul's point of
view as buyer rather than builder. Some others off the top of my head might
be painting, ongoing maintenance, insurance, tailwheel/tricycle, liability
when selling, etc, etc.
The link below is a copy of the slideshow Len & I gave to the Winston-Salem
Aviation Assoc last year. It loosely chronicles my six years building. I
sort of winged the verbiage behind each slide. The presentation was well
received. We can use the format as a template, or not.
http://picasaweb.google.com/lcbowen/RVPresentation
I plan to have a laptop there, and was told a PC projector will be made
available as well.
All ideas and input are welcome.
-
Larry Bowen, RV-8 233 Hrs.
Larry@BowenAero.com
<http://bowenaero.com/> http://BowenAero.com
_____
From: Bill Repucci [mailto:bill@repucci.com]
Sent: Sunday, October 08, 2006 9:21 AM
Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
Now that we are still "in", what would you like us to talk about and what is
the format?
Since I'm still building I thought I could talk for about 15 minutes on the
following:
- Selecting and setting up your shop
- Finding time to build
- involving your spouse and kids
- Selecting options and the impact to your budget (Time and $$$)
- Keeping motivated
- Safety precautions while building
- Resources (Local help, books and web sites)
- Having fun while building
(That seems like a lot but it will go quick)
That will leave technical stuff to the Tech counselors.
Will you have an overhead projector and computer available? If not I can
bring handouts to cover the bullet items listed above.
Bill R.
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
dwmillsap@netzero.net
Sent: Sunday, October 08, 2006 7:26 AM
Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
Yes, Dennis is committed to this event...he had obligated himself to be
there before the list discussion due to his connection through the
university or the local EAA chapter (I don't know which). Anyway, he has
already arranged to deliver his plane on Friday with me as ground crew, then
pick it up on Sunday with someone else driving him down. Count on him to be
there.
You can email him at millsapd@ecu.edu if you want to discuss specifics, or
call him at work at 252-328-6597.
Lori
-- "Larry Bowen" <Larry@bowenaero.com> wrote:
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
In response to the email below, the following folks showed an interest back
in August:
Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul
D. Franzon & Len Leggette.
We are less than a month away now. Is everyone still in?
I have a slight complication in that my conditional inspection is due by
then end of Oct, so unless I get cracking on it, my plane will likely be in
pieces in November.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
================================
Aug 5th:
I got a call from the FAA the other day. Before I could voice my alibi, he
told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC.
He's looking for a couple volunteers to do presentation on the RV's and what
it takes to build and fly them. Sort of like the presentation Len and I did
for the Winston-Salem airport group a couple months ago. I told him I would
ask the group if anyone was available/interested. It would be a 40-50
minute presentation in a classroom type environment. Maybe a slideshow,
questions from the attendees, etc. I'm thinking 3-4 people who are well
into their kit or flying would be good.
Who would&n======================= - The RVSouthEast-List Emaimany List
utilities such as the Subscripti======================= - NEW
MATRONIC now also available via the Web Forum========================sp;
- NEW nfo to the Matronics Email List Wiki!
_======================= - List Contribution&p;
&nbs=============================
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron
ics.com/Navigator?RVSouthEast-List
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron
ics.com/Navigator?RVSouthEast-List
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I just ran through about a half dozen drill bits drilling the cotter pin holes
in one wheel axle of my RV8A. That is some tough steel! Does anyone have a suggestion
on what kind of drill bits to use here? There has got to be something
tougher than the "titanium" bits I got at Lowes.
Thanks,
Craig Gallenbach
RV8A ...... trying to get it on the gear
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
You lubing it? We drilled those a few weeks ago at Bill's house and it was
a snap.. didn't take much (same bit for both legs).. also, low speed on the
drill would help too.. (eg, I wouldn't use air drill for that)
>From my general experience, cobalt bits lasted longer than hss bits
especially if you try drilling any steel parts.
_____
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Craig
Sent: Sunday, October 08, 2006 5:37 PM
Subject: RVSouthEast-List: Drill bits
I just ran through about a half dozen drill bits drilling the cotter pin
holes in one wheel axle of my RV8A. That is some tough steel! Does anyone
have a suggestion on what kind of drill bits to use here? There has got to
be something tougher than the "titanium" bits I got at Lowes.
Thanks,
Craig Gallenbach
RV8A ...... trying to get it on the gear
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I was lubing it, but I also was using high speed (air drill). I'll try it a bit
slower.
Craig
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th |
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
No prob, here's to a speedy recovery....
--
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
Dale Ensing wrote:
> --> RVSouthEast-List message posted by: "Dale Ensing"
> <densing@carolina.rr.com>
>
> Sorry Larry,
> There has been a little change in my plans. I am now scheduled for surgery
> on Nov 2nd. Will be in hospital 3 or 4 days then out of action for two
> weeks. After that ????
> Dale Ensing
>
> ----- Original Message -----
> From: "Larry Bowen" <Larry@bowenaero.com>
> To: <rvsoutheast-list@matronics.com>
> Sent: Saturday, October 07, 2006 10:11 PM
> Subject: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
>
>
>> --> RVSouthEast-List message posted by: "Larry Bowen"
> <Larry@BowenAero.com>
>>
>> In response to the email below, the following folks showed an interest
> back
>> in August:
>>
>> Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing,
>> Paul
>> D. Franzon & Len Leggette.
>>
>> We are less than a month away now. Is everyone still in?
>>
>> I have a slight complication in that my conditional inspection is due by
>> then end of Oct, so unless I get cracking on it, my plane will likely be
> in
>> pieces in November.
>>
>> -
>> Larry Bowen
>> Larry@BowenAero.com
>> http://BowenAero.com
>>
>> ================================
>>
>> Aug 5th:
>>
>> I got a call from the FAA the other day. Before I could voice my alibi,
>> he
>> told me it was regarding the Wings Weekend on November 4th at Goldsboro,
> NC.
>> He's looking for a couple volunteers to do presentation on the RV's and
> what
>> it takes to build and fly them. Sort of like the presentation Len and I
> did
>> for the Winston-Salem airport group a couple months ago. I told him I
> would
>> ask the group if anyone was available/interested. It would be a 40-50
>> minute presentation in a classroom type environment. Maybe a slideshow,
>> questions from the attendees, etc. I'm thinking 3-4 people who are well
>> into their kit or flying would be good.
>>
>> Who would be willing to participate?
>>
>> -LB
>>
>>
>>
>>
>
>
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
That's been on my list for years too. Put me down as interested.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com <http://bowenaero.com/>
_____
From: DOUGPFLYRV@aol.com [mailto:DOUGPFLYRV@aol.com]
Sent: Sunday, October 08, 2006 1:21 PM
Subject: Re: RVSouthEast-List: Trip of Trips
I am hoping to go west next Sept. to Van's homecoming plus the other
interesting stops. Plan on 2 weeks. Anyone interested in that time frame?
Doug Preston
BHM
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Goldsboro Wings Weekend, RV Seminar, Nov 4th |
Great. Thx, Lori.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com <http://bowenaero.com/>
_____
From: dwmillsap@netzero.net [mailto:dwmillsap@netzero.net]
Sent: Sunday, October 08, 2006 7:26 AM
Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th
Yes, Dennis is committed to this event...he had obligated himself to be
there before the list discussion due to his connection through the
university or the local EAA chapter (I don't know which). Anyway, he has
already arranged to deliver his plane on Friday with me as ground crew, then
pick it up on Sunday with someone else driving him down. Count on him to be
there.
You can email him at millsapd@ecu.edu if you want to discuss specifics, or
call him at work at 252-328-6597.
Lori
-- "Larry Bowen" <Larry@bowenaero.com> wrote:
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
In response to the email below, the following folks showed an interest back
in August:
Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul
D. Franzon & Len Leggette.
We are less than a month away now. Is everyone still in?
I have a slight complication in that my conditional inspection is due by
then end of Oct, so unless I get cracking on it, my plane will likely be in
pieces in November.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
================================
Aug 5th:
I got a call from the FAA the other day. Before I could voice my alibi, he
told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC.
He's looking for a couple volunteers to do presentation on the RV's and what
it takes to build and fly them. Sort of like the presentation Len and I did
for the Winston-Salem airport group a couple months ago. I told him I would
ask the group if anyone was available/interested. It would be a 40-50
minute presentation in a classroom type environment. Maybe a slideshow,
questions from the attendees, etc. I'm thinking 3-4 people who are well
into their kit or flying would be good.
Who would&n================================================ - The
RVSouthEast-List Emaimany List utilities such as the
Subscripti================================================ - NEW
MATRONIC now also available via the Web Forum========================sp;
- NEW nfo to the Matronics Email List Wiki!
_================================================ - List
Contribution&p;
&nbs======================================================
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Craig, I used cobalt drill bits, drill slowly - like 200-300 rpm, use
oil. Spinning too fast can further harden the metal in the hole you are
drilling as well as dull your bit.
Ed
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
http://members.cox.net/rogersda/rotary/configs.htm#N494BW
http://www.dmack.net/mazda/index.html
----- Original Message -----
From: Craig
To: rv-list@matronics.com ; rvsoutheast-list@matronics.com
Sent: Sunday, October 08, 2006 5:36 PM
Subject: RVSouthEast-List: Drill bits
I just ran through about a half dozen drill bits drilling the cotter
pin holes in one wheel axle of my RV8A. That is some tough steel! Does
anyone have a suggestion on what kind of drill bits to use here? There
has got to be something tougher than the "titanium" bits I got at Lowes.
Thanks,
Craig Gallenbach
RV8A ...... trying to get it on the gear
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: bill crothers <bill28104@yahoo.com>
As a warm-up to a longer trip or 2 next spring/fall, I
suggest a trip to Key West for a long wkend in
January. Much to do and no surly aviation bureaucrats
like I've encountered in Bahamas. If interested, pls.
advise and I can start researching places to stay.
Reno Red.
--- Larry Bowen <Larry@bowenaero.com> wrote:
> That's been on my list for years too. Put me down
> as interested.
>
>
> -
> Larry Bowen
> Larry@BowenAero.com
> http://BowenAero.com <http://bowenaero.com/>
>
>
>
>
>
> _____
>
> From: DOUGPFLYRV@aol.com [mailto:DOUGPFLYRV@aol.com]
>
> Sent: Sunday, October 08, 2006 1:21 PM
> To: rvsoutheast-list@matronics.com
> Subject: Re: RVSouthEast-List: Trip of Trips
>
>
>
> I am hoping to go west next Sept. to Van's
> homecoming plus the other
> interesting stops. Plan on 2 weeks. Anyone
> interested in that time frame?
> Doug Preston
> BHM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
__________________________________________________
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RVSouthEast-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
FL in Jan sounds good to me. I think Len was going to look into a houseboat
adventure down there too.....
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: bill crothers [mailto:bill28104@yahoo.com]
> Sent: Sunday, October 08, 2006 8:06 PM
> To: rvsoutheast-list@matronics.com
> Subject: RE: RVSouthEast-List: Trip of Trips
>
> --> RVSouthEast-List message posted by: bill crothers
> --> <bill28104@yahoo.com>
>
> As a warm-up to a longer trip or 2 next spring/fall, I
> suggest a trip to Key West for a long wkend in January. Much
> to do and no surly aviation bureaucrats like I've encountered
> in Bahamas. If interested, pls.
> advise and I can start researching places to stay.
> Reno Red.
>
> --- Larry Bowen <Larry@bowenaero.com> wrote:
>
> > That's been on my list for years too. Put me down as interested.
> >
> >
> > -
> > Larry Bowen
> > Larry@BowenAero.com
> > http://BowenAero.com <http://bowenaero.com/>
> >
> >
> >
> >
> >
> > _____
> >
> > From: DOUGPFLYRV@aol.com [mailto:DOUGPFLYRV@aol.com]
> >
> > Sent: Sunday, October 08, 2006 1:21 PM
> > To: rvsoutheast-list@matronics.com
> > Subject: Re: RVSouthEast-List: Trip of Trips
> >
> >
> >
> > I am hoping to go west next Sept. to Van's homecoming plus
> the other
> > interesting stops. Plan on 2 weeks. Anyone interested in that time
> > frame?
> > Doug Preston
> > BHM
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> __________________________________________________
>
> Photoshare, and much much more:
>
>
>
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Trip of Trips |
Put me down as interested. Mike Barbee
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I found cobalt bits work well. Keep them lubed with marvel mystery oil
and drill slowely.
Tad Sargent 7A 155hrs
----- Original Message -----
From: Craig
To: rv-list@matronics.com ; rvsoutheast-list@matronics.com
Sent: Sunday, October 08, 2006 5:36 PM
Subject: RVSouthEast-List: Drill bits
I just ran through about a half dozen drill bits drilling the cotter
pin holes in one wheel axle of my RV8A. That is some tough steel! Does
anyone have a suggestion on what kind of drill bits to use here? There
has got to be something tougher than the "titanium" bits I got at Lowes.
Thanks,
Craig Gallenbach
RV8A ...... trying to get it on the gear
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Yeah go get you a dollar masonary bit,it will drill though it.
----- Original Message -----
From: tadsargent
To: rvsoutheast-list@matronics.com
Sent: Sunday, October 08, 2006 9:44 PM
Subject: Re: RVSouthEast-List: Drill bits
I found cobalt bits work well. Keep them lubed with marvel mystery
oil and drill slowely.
Tad Sargent 7A 155hrs
----- Original Message -----
From: Craig
To: rv-list@matronics.com ; rvsoutheast-list@matronics.com
Sent: Sunday, October 08, 2006 5:36 PM
Subject: RVSouthEast-List: Drill bits
I just ran through about a half dozen drill bits drilling the cotter
pin holes in one wheel axle of my RV8A. That is some tough steel! Does
anyone have a suggestion on what kind of drill bits to use here? There
has got to be something tougher than the "titanium" bits I got at Lowes.
Thanks,
Craig Gallenbach
RV8A ...... trying to get it on the gear
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.m
atronics.com/Navigator?RVSouthEast-List
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|