---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Sun 10/08/06: 22 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:27 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (dwmillsap@netzero.net) 2. 05:28 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Steve Glasgow) 3. 06:20 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Bill Repucci) 4. 08:40 AM - Re: SERV Shirts, Hats, T-Shirts (Lenleg@aol.com) 5. 08:44 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen) 6. 08:48 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen) 7. 10:17 AM - Re: SERV Shirts, Hats, T-Shirts (Robbie Walker) 8. 10:21 AM - Re: Trip of Trips (DOUGPFLYRV@aol.com) 9. 10:22 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Dale Ensing) 10. 10:55 AM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Paul D. Franzon) 11. 02:37 PM - Drill bits (Craig) 12. 02:44 PM - Re: Drill bits (Radomir Zaric) 13. 04:17 PM - Re: Drill bits (Craig) 14. 04:35 PM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen) 15. 04:53 PM - Re: Trip of Trips (Larry Bowen) 16. 05:14 PM - Re: Goldsboro Wings Weekend, RV Seminar, Nov 4th (Larry Bowen) 17. 05:32 PM - Re: Drill bits (Ed Anderson) 18. 05:38 PM - Re: Trip of Trips (bill crothers) 19. 05:57 PM - Re: Trip of Trips (Larry Bowen) 20. 06:38 PM - Re: Trip of Trips (TWOBARBEE@wmconnect.com) 21. 06:44 PM - Re: Drill bits (tadsargent) 22. 08:56 PM - Re: Drill bits (ben burril) ________________________________ Message 1 _____________________________________ Time: 04:27:55 AM PST US From: "dwmillsap@netzero.net" Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Yes, Dennis is committed to this event...he had obligated himself to be there before the list discussion due to his connection through the unive rsity or the local EAA chapter (I don't know which). Anyway, he has alre ady arranged to deliver his plane on Friday with me as ground crew, then pick it up on Sunday with someone else driving him down. Count on him t o be there. You can email him at millsapd@ecu.edu if you want to discuss specifics, or call him at work at 252-328-6597. Lori -- "Larry Bowen" wrote: --> RVSouthEast-List message posted by: "Larry Bowen" In response to the email below, the following folks showed an interest b ack in August: Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Pa ul D. Franzon & Len Leggette. We are less than a month away now. Is everyone still in? I have a slight complication in that my conditional inspection is due by then end of Oct, so unless I get cracking on it, my plane will likely be in pieces in November. - Larry Bowen Larry@BowenAero.com http://BowenAero.com ======================== ======== Aug 5th: I got a call from the FAA the other day. Before I could voice my alibi, he told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. He's looking for a couple volunteers to do presentation on the RV's and what it takes to build and fly them. Sort of like the presentation Len and I did for the Winston-Salem airport group a couple months ago. I told him I wo uld ask the group if anyone was available/interested. It would be a 40-50 minute presentation in a classroom type environment. Maybe a slideshow, questions from the attendees, etc. I'm thinking 3-4 people who are well into their kit or flying would be good. Who would be willing to participate? -LB ======================== =========== ======================== =========== ======================== =========== ======================== =========== ======================== ===========

Yes, Dennis is committed to this event...he had obligated himse lf to be there before the list discussion due to his connection through the university or the local EAA chapter (I don't know which). Anyway, he has already arranged to deliver his plane on Friday with me as ground c rew, then pick it up on Sunday with someone else driving him down. Count on him to be there.

You can email him at millsapd@ecu .edu if you want to discuss specifics, or call him at work at 252-32 8-6597.

Lori

-- "Larry Bowen" <Larry@bowenaero.com&g t; wrote:
--> RVSouthEast-List message posted& nbsp;by: "Larry Bowen" <Larry@BowenAero.com>

In response to the email below, the following folks showed an interest back
in&n bsp;August:

Bill Repucci, Ron Schreck, Steve& nbsp;Glasgow, Denis Millsap, Dale Ensing, Paul< BR>D. Franzon & Len Leggette.

We are less than a month away now.  Is everyone still in?

I have a slight complication in that my conditional inspe ction is due by
then end of Oct, s o unless I get cracking on it, my&nbs p;plane will likely be in
pieces in Nov ember.

-
Larry Bowen
Larry@BowenAero.com
http://Bow enAero.com

================== ===============

Aug 5th:
I got a call from the FAA the other day. Before I could voice my al ibi, he
told me it was regarding the&nb sp;Wings Weekend on November 4th at Goldsb oro, NC.
He's looking for a couple volu nteers to do presentation on the RV's ;and what
it takes to build and fly&nbs p;them. Sort of like the presentation Len& nbsp;and I did
for the Winston-Salem airport group a couple months ago. I told&nb sp;him I would
ask the group if anyone& nbsp;was available/interested. It would be a&nb sp;40-50
minute presentation in a classroom type environment. Maybe a slideshow,
questions&nb sp;from the attendees, etc. I'm thinking 3 -4 people who are well
into their kit&n bsp;or flying would be good.

Who would&n ======================== ========================      - The RVSouthEast-List Emai many List utilities such as the Subscripti ======================== ========================         - NEW MATRONIC now also available via the Web Forum ======================== sp;         - NEW nfo to the Matronics Email List Wiki!
_ ======================== ========================        - List Contribution& p;           &nbs p;           &nbs ======================== ======================== =======

________________________________ Message 2 _____________________________________ Time: 05:28:49 AM PST US From: "Steve Glasgow" Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th There is an event for aircraft owners at JQF so I'm out. Cappy ----- Original Message ----- From: Larry Bowen To: rvsoutheast-list@matronics.com Sent: Saturday, October 07, 2006 10:11 PM Subject: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th --> RVSouthEast-List message posted by: "Larry Bowen" In response to the email below, the following folks showed an interest back in August: Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul D. Franzon & Len Leggette. We are less than a month away now. Is everyone still in? I have a slight complication in that my conditional inspection is due by then end of Oct, so unless I get cracking on it, my plane will likely be in pieces in November. - Larry Bowen Larry@BowenAero.com http://BowenAero.com ======= Aug 5th: I got a call from the FAA the other day. Before I could voice my alibi, he told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. He's looking for a couple volunteers to do presentation on the RV's and what it takes to build and fly them. Sort of like the presentation Len and I did for the Winston-Salem airport group a couple months ago. I told him I would ask the group if anyone was available/interested. It would be a 40-50 minute presentation in a classroom type environment. Maybe a slideshow, questions from the attendees, etc. I'm thinking 3-4 people who are well into their kit or flying would be good. Who would be willing to participate? -LB ________________________________ Message 3 _____________________________________ Time: 06:20:56 AM PST US From: "Bill Repucci" Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Now that we are still "in", what would you like us to talk about and what is the format? Since I'm still building I thought I could talk for about 15 minutes on the following: - Selecting and setting up your shop - Finding time to build - involving your spouse and kids - Selecting options and the impact to your budget (Time and $$$) - Keeping motivated - Safety precautions while building - Resources (Local help, books and web sites) - Having fun while building (That seems like a lot but it will go quick) That will leave technical stuff to the Tech counselors. Will you have an overhead projector and computer available? If not I can bring handouts to cover the bullet items listed above. Bill R. -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of dwmillsap@netzero.net Sent: Sunday, October 08, 2006 7:26 AM Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Yes, Dennis is committed to this event...he had obligated himself to be there before the list discussion due to his connection through the university or the local EAA chapter (I don't know which). Anyway, he has already arranged to deliver his plane on Friday with me as ground crew, then pick it up on Sunday with someone else driving him down. Count on him to be there. You can email him at millsapd@ecu.edu if you want to discuss specifics, or call him at work at 252-328-6597. Lori -- "Larry Bowen" wrote: --> RVSouthEast-List message posted by: "Larry Bowen" In response to the email below, the following folks showed an interest back in August: Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul D. Franzon & Len Leggette. We are less than a month away now. Is everyone still in? I have a slight complication in that my conditional inspection is due by then end of Oct, so unless I get cracking on it, my plane will likely be in pieces in November. - Larry Bowen Larry@BowenAero.com http://BowenAero.com ================================ Aug 5th: I got a call from the FAA the other day. Before I could voice my alibi, he told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. He's looking for a couple volunteers to do presentation on the RV's and what it takes to build and fly them. Sort of like the presentation Len and I did for the Winston-Salem airport group a couple months ago. I told him I would ask the group if anyone was available/interested. It would be a 40-50 minute presentation in a classroom type environment. Maybe a slideshow, questions from the attendees, etc. I'm thinking 3-4 people who are well into their kit or flying would be good. Who would&n================================================ - The RVSouthEast-List Emaimany List utilities such as the Subscripti================================================ - NEW MATRONIC now also available via the Web Forum========================sp; - NEW nfo to the Matronics Email List Wiki! _================================================ - List Contribution&p; &nbs====================================================== ________________________________ Message 4 _____________________________________ Time: 08:40:00 AM PST US From: Lenleg@aol.com Subject: Re: RVSouthEast-List: SERV Shirts, Hats, T-Shirts In a message dated 10/7/2006 1:16:16 P.M. Eastern Standard Time, robbie@atlanticpkg.com writes: If you do a run you can count on me for at least 2 hats... but I doubt that you're going to run 3X tee-shirts, huh? Robbie Walker It will all be special order ... you can get whatever size you would like !!! Len ________________________________ Message 5 _____________________________________ Time: 08:44:37 AM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th We've sort of been given a blank slate as far as the format and content goes. We need to decide what to discuss and divvy things up accordingly. You list some great points below and we can build upon those. Another one I remember from when we first discussed this in August, is Paul's point of view as buyer rather than builder. Some others off the top of my head might be painting, ongoing maintenance, insurance, tailwheel/tricycle, liability when selling, etc, etc. The link below is a copy of the slideshow Len & I gave to the Winston-Salem Aviation Assoc last year. It loosely chronicles my six years building. I sort of winged the verbiage behind each slide. The presentation was well received. We can use the format as a template, or not. http://picasaweb.google.com/lcbowen/RVPresentation I plan to have a laptop there, and was told a PC projector will be made available as well. All ideas and input are welcome. - Larry Bowen, RV-8 233 Hrs. Larry@BowenAero.com http://BowenAero.com _____ From: Bill Repucci [mailto:bill@repucci.com] Sent: Sunday, October 08, 2006 9:21 AM Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Now that we are still "in", what would you like us to talk about and what is the format? Since I'm still building I thought I could talk for about 15 minutes on the following: - Selecting and setting up your shop - Finding time to build - involving your spouse and kids - Selecting options and the impact to your budget (Time and $$$) - Keeping motivated - Safety precautions while building - Resources (Local help, books and web sites) - Having fun while building (That seems like a lot but it will go quick) That will leave technical stuff to the Tech counselors. Will you have an overhead projector and computer available? If not I can bring handouts to cover the bullet items listed above. Bill R. -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of dwmillsap@netzero.net Sent: Sunday, October 08, 2006 7:26 AM Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Yes, Dennis is committed to this event...he had obligated himself to be there before the list discussion due to his connection through the university or the local EAA chapter (I don't know which). Anyway, he has already arranged to deliver his plane on Friday with me as ground crew, then pick it up on Sunday with someone else driving him down. Count on him to be there. You can email him at millsapd@ecu.edu if you want to discuss specifics, or call him at work at 252-328-6597. Lori -- "Larry Bowen" wrote: --> RVSouthEast-List message posted by: "Larry Bowen" In response to the email below, the following folks showed an interest back in August: Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul D. Franzon & Len Leggette. We are less than a month away now. Is everyone still in? I have a slight complication in that my conditional inspection is due by then end of Oct, so unless I get cracking on it, my plane will likely be in pieces in November. - Larry Bowen Larry@BowenAero.com http://BowenAero.com ================================ Aug 5th: I got a call from the FAA the other day. Before I could voice my alibi, he told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. He's looking for a couple volunteers to do presentation on the RV's and what it takes to build and fly them. Sort of like the presentation Len and I did for the Winston-Salem airport group a couple months ago. I told him I would ask the group if anyone was available/interested. It would be a 40-50 minute presentation in a classroom type environment. Maybe a slideshow, questions from the attendees, etc. I'm thinking 3-4 people who are well into their kit or flying would be good. Who would&n======================= - The RVSouthEast-List Emaimany List utilities such as the Subscripti======================= - NEW MATRONIC now also available via the Web Forum========================sp; - NEW nfo to the Matronics Email List Wiki! _======================= - List Contribution&p; &nbs============================= href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron ics.com/Navigator?RVSouthEast-List href="http://forums.matronics.com">http://forums.matronics.com href="http://wiki.matronics.com">http://wiki.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ________________________________ Message 6 _____________________________________ Time: 08:48:31 AM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Another thing we did was show a Ed Hicks photo slideshow before and after the "feature presenation" (with his blessing). That went over well too.... - Larry Bowen Larry@BowenAero.com http://BowenAero.com _____ From: Larry Bowen [mailto:Larry@bowenaero.com] Sent: Sunday, October 08, 2006 11:44 AM Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th We've sort of been given a blank slate as far as the format and content goes. We need to decide what to discuss and divvy things up accordingly. You list some great points below and we can build upon those. Another one I remember from when we first discussed this in August, is Paul's point of view as buyer rather than builder. Some others off the top of my head might be painting, ongoing maintenance, insurance, tailwheel/tricycle, liability when selling, etc, etc. The link below is a copy of the slideshow Len & I gave to the Winston-Salem Aviation Assoc last year. It loosely chronicles my six years building. I sort of winged the verbiage behind each slide. The presentation was well received. We can use the format as a template, or not. http://picasaweb.google.com/lcbowen/RVPresentation I plan to have a laptop there, and was told a PC projector will be made available as well. All ideas and input are welcome. - Larry Bowen, RV-8 233 Hrs. Larry@BowenAero.com http://BowenAero.com _____ From: Bill Repucci [mailto:bill@repucci.com] Sent: Sunday, October 08, 2006 9:21 AM Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Now that we are still "in", what would you like us to talk about and what is the format? Since I'm still building I thought I could talk for about 15 minutes on the following: - Selecting and setting up your shop - Finding time to build - involving your spouse and kids - Selecting options and the impact to your budget (Time and $$$) - Keeping motivated - Safety precautions while building - Resources (Local help, books and web sites) - Having fun while building (That seems like a lot but it will go quick) That will leave technical stuff to the Tech counselors. Will you have an overhead projector and computer available? If not I can bring handouts to cover the bullet items listed above. Bill R. -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of dwmillsap@netzero.net Sent: Sunday, October 08, 2006 7:26 AM Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Yes, Dennis is committed to this event...he had obligated himself to be there before the list discussion due to his connection through the university or the local EAA chapter (I don't know which). Anyway, he has already arranged to deliver his plane on Friday with me as ground crew, then pick it up on Sunday with someone else driving him down. Count on him to be there. You can email him at millsapd@ecu.edu if you want to discuss specifics, or call him at work at 252-328-6597. Lori -- "Larry Bowen" wrote: --> RVSouthEast-List message posted by: "Larry Bowen" In response to the email below, the following folks showed an interest back in August: Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul D. Franzon & Len Leggette. We are less than a month away now. Is everyone still in? I have a slight complication in that my conditional inspection is due by then end of Oct, so unless I get cracking on it, my plane will likely be in pieces in November. - Larry Bowen Larry@BowenAero.com http://BowenAero.com ================================ Aug 5th: I got a call from the FAA the other day. Before I could voice my alibi, he told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. He's looking for a couple volunteers to do presentation on the RV's and what it takes to build and fly them. Sort of like the presentation Len and I did for the Winston-Salem airport group a couple months ago. I told him I would ask the group if anyone was available/interested. It would be a 40-50 minute presentation in a classroom type environment. Maybe a slideshow, questions from the attendees, etc. I'm thinking 3-4 people who are well into their kit or flying would be good. Who would&n======================= - The RVSouthEast-List Emaimany List utilities such as the Subscripti======================= - NEW MATRONIC now also available via the Web Forum========================sp; - NEW nfo to the Matronics Email List Wiki! _======================= - List Contribution&p; &nbs============================= href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron ics.com/Navigator?RVSouthEast-List href="http://forums.matronics.com">http://forums.matronics.com href="http://wiki.matronics.com">http://wiki.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron ics.com/Navigator?RVSouthEast-List href="http://forums.matronics.com">http://forums.matronics.com href="http://wiki.matronics.com">http://wiki.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ________________________________ Message 7 _____________________________________ Time: 10:17:36 AM PST US From: Robbie Walker Subject: Re: RVSouthEast-List: SERV Shirts, Hats, T-Shirts Well, then I'm in four a few shirts too, tee-shirts & collared. FYI, folks, I completed my flight review and medical renewal last week, so it's back to renting Skyhawks for the time being. Robbie On Oct 8, 2006, at 11:39 AM, Lenleg@aol.com wrote: > In a message dated 10/7/2006 1:16:16 P.M. Eastern Standard Time, > robbie@atlanticpkg.com writes: > If you do a run you can count on me for at least 2 hats... but I > doubt that you're going to run 3X tee-shirts, huh? > > Robbie Walker > > It will all be special order ... you can get whatever size you > would like !!! > > Len > > ________________________________ Message 8 _____________________________________ Time: 10:21:16 AM PST US From: DOUGPFLYRV@aol.com Subject: Re: RVSouthEast-List: Trip of Trips I am hoping to go west next Sept. to Van's homecoming plus the other interesting stops. Plan on 2 weeks. Anyone interested in that time frame? Doug Preston BHM ________________________________ Message 9 _____________________________________ Time: 10:22:22 AM PST US From: "Dale Ensing" Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th --> RVSouthEast-List message posted by: "Dale Ensing" Sorry Larry, There has been a little change in my plans. I am now scheduled for surgery on Nov 2nd. Will be in hospital 3 or 4 days then out of action for two weeks. After that ???? Dale Ensing ----- Original Message ----- From: "Larry Bowen" Sent: Saturday, October 07, 2006 10:11 PM Subject: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th > --> RVSouthEast-List message posted by: "Larry Bowen" > > In response to the email below, the following folks showed an interest back > in August: > > Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul > D. Franzon & Len Leggette. > > We are less than a month away now. Is everyone still in? > > I have a slight complication in that my conditional inspection is due by > then end of Oct, so unless I get cracking on it, my plane will likely be in > pieces in November. > > - > Larry Bowen > Larry@BowenAero.com > http://BowenAero.com > > ================================ > > Aug 5th: > > I got a call from the FAA the other day. Before I could voice my alibi, he > told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. > He's looking for a couple volunteers to do presentation on the RV's and what > it takes to build and fly them. Sort of like the presentation Len and I did > for the Winston-Salem airport group a couple months ago. I told him I would > ask the group if anyone was available/interested. It would be a 40-50 > minute presentation in a classroom type environment. Maybe a slideshow, > questions from the attendees, etc. I'm thinking 3-4 people who are well > into their kit or flying would be good. > > Who would be willing to participate? > > -LB > > ________________________________ Message 10 ____________________________________ Time: 10:55:46 AM PST US From: "Paul D. Franzon" Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th I hope to still make it. I will be in CA that week and my schedule is not finalized yet. Paul D. Franzon Alumni Distinguished Professor of ECE, 443 Monteith GRC ECE, Box 7911, Raleigh, NC 27695 MRC 223, 2410 Campus Shore Dr., Raleigh NC 27604 paulf@ncsu.edu , www.ece.ncsu.edu/erl/faculty/paulf.html _____ From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Larry Bowen Sent: Sunday, October 08, 2006 11:44 AM Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th We've sort of been given a blank slate as far as the format and content goes. We need to decide what to discuss and divvy things up accordingly. You list some great points below and we can build upon those. Another one I remember from when we first discussed this in August, is Paul's point of view as buyer rather than builder. Some others off the top of my head might be painting, ongoing maintenance, insurance, tailwheel/tricycle, liability when selling, etc, etc. The link below is a copy of the slideshow Len & I gave to the Winston-Salem Aviation Assoc last year. It loosely chronicles my six years building. I sort of winged the verbiage behind each slide. The presentation was well received. We can use the format as a template, or not. http://picasaweb.google.com/lcbowen/RVPresentation I plan to have a laptop there, and was told a PC projector will be made available as well. All ideas and input are welcome. - Larry Bowen, RV-8 233 Hrs. Larry@BowenAero.com http://BowenAero.com _____ From: Bill Repucci [mailto:bill@repucci.com] Sent: Sunday, October 08, 2006 9:21 AM Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Now that we are still "in", what would you like us to talk about and what is the format? Since I'm still building I thought I could talk for about 15 minutes on the following: - Selecting and setting up your shop - Finding time to build - involving your spouse and kids - Selecting options and the impact to your budget (Time and $$$) - Keeping motivated - Safety precautions while building - Resources (Local help, books and web sites) - Having fun while building (That seems like a lot but it will go quick) That will leave technical stuff to the Tech counselors. Will you have an overhead projector and computer available? If not I can bring handouts to cover the bullet items listed above. Bill R. -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of dwmillsap@netzero.net Sent: Sunday, October 08, 2006 7:26 AM Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Yes, Dennis is committed to this event...he had obligated himself to be there before the list discussion due to his connection through the university or the local EAA chapter (I don't know which). Anyway, he has already arranged to deliver his plane on Friday with me as ground crew, then pick it up on Sunday with someone else driving him down. Count on him to be there. You can email him at millsapd@ecu.edu if you want to discuss specifics, or call him at work at 252-328-6597. Lori -- "Larry Bowen" wrote: --> RVSouthEast-List message posted by: "Larry Bowen" In response to the email below, the following folks showed an interest back in August: Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul D. Franzon & Len Leggette. We are less than a month away now. Is everyone still in? I have a slight complication in that my conditional inspection is due by then end of Oct, so unless I get cracking on it, my plane will likely be in pieces in November. - Larry Bowen Larry@BowenAero.com http://BowenAero.com ================================ Aug 5th: I got a call from the FAA the other day. Before I could voice my alibi, he told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. He's looking for a couple volunteers to do presentation on the RV's and what it takes to build and fly them. Sort of like the presentation Len and I did for the Winston-Salem airport group a couple months ago. I told him I would ask the group if anyone was available/interested. It would be a 40-50 minute presentation in a classroom type environment. Maybe a slideshow, questions from the attendees, etc. I'm thinking 3-4 people who are well into their kit or flying would be good. Who would&n======================= - The RVSouthEast-List Emaimany List utilities such as the Subscripti======================= - NEW MATRONIC now also available via the Web Forum========================sp; - NEW nfo to the Matronics Email List Wiki! _======================= - List Contribution&p; &nbs============================= href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron ics.com/Navigator?RVSouthEast-List href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.matron ics.com/Navigator?RVSouthEast-List ________________________________ Message 11 ____________________________________ Time: 02:37:15 PM PST US From: Craig Subject: RVSouthEast-List: Drill bits I just ran through about a half dozen drill bits drilling the cotter pin holes in one wheel axle of my RV8A. That is some tough steel! Does anyone have a suggestion on what kind of drill bits to use here? There has got to be something tougher than the "titanium" bits I got at Lowes. Thanks, Craig Gallenbach RV8A ...... trying to get it on the gear ________________________________ Message 12 ____________________________________ Time: 02:44:46 PM PST US From: "Radomir Zaric" Subject: RE: RVSouthEast-List: Drill bits You lubing it? We drilled those a few weeks ago at Bill's house and it was a snap.. didn't take much (same bit for both legs).. also, low speed on the drill would help too.. (eg, I wouldn't use air drill for that) >From my general experience, cobalt bits lasted longer than hss bits especially if you try drilling any steel parts. _____ From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Craig Sent: Sunday, October 08, 2006 5:37 PM Subject: RVSouthEast-List: Drill bits I just ran through about a half dozen drill bits drilling the cotter pin holes in one wheel axle of my RV8A. That is some tough steel! Does anyone have a suggestion on what kind of drill bits to use here? There has got to be something tougher than the "titanium" bits I got at Lowes. Thanks, Craig Gallenbach RV8A ...... trying to get it on the gear ________________________________ Message 13 ____________________________________ Time: 04:17:10 PM PST US From: Craig Subject: RE: RVSouthEast-List: Drill bits I was lubing it, but I also was using high speed (air drill). I'll try it a bit slower. Craig ________________________________ Message 14 ____________________________________ Time: 04:35:15 PM PST US Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th From: "Larry Bowen" --> RVSouthEast-List message posted by: "Larry Bowen" No prob, here's to a speedy recovery.... -- Larry Bowen Larry@BowenAero.com http://BowenAero.com Dale Ensing wrote: > --> RVSouthEast-List message posted by: "Dale Ensing" > > > Sorry Larry, > There has been a little change in my plans. I am now scheduled for surgery > on Nov 2nd. Will be in hospital 3 or 4 days then out of action for two > weeks. After that ???? > Dale Ensing > > ----- Original Message ----- > From: "Larry Bowen" > To: > Sent: Saturday, October 07, 2006 10:11 PM > Subject: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th > > >> --> RVSouthEast-List message posted by: "Larry Bowen" > >> >> In response to the email below, the following folks showed an interest > back >> in August: >> >> Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, >> Paul >> D. Franzon & Len Leggette. >> >> We are less than a month away now. Is everyone still in? >> >> I have a slight complication in that my conditional inspection is due by >> then end of Oct, so unless I get cracking on it, my plane will likely be > in >> pieces in November. >> >> - >> Larry Bowen >> Larry@BowenAero.com >> http://BowenAero.com >> >> ================================ >> >> Aug 5th: >> >> I got a call from the FAA the other day. Before I could voice my alibi, >> he >> told me it was regarding the Wings Weekend on November 4th at Goldsboro, > NC. >> He's looking for a couple volunteers to do presentation on the RV's and > what >> it takes to build and fly them. Sort of like the presentation Len and I > did >> for the Winston-Salem airport group a couple months ago. I told him I > would >> ask the group if anyone was available/interested. It would be a 40-50 >> minute presentation in a classroom type environment. Maybe a slideshow, >> questions from the attendees, etc. I'm thinking 3-4 people who are well >> into their kit or flying would be good. >> >> Who would be willing to participate? >> >> -LB >> >> >> >> > > ________________________________ Message 15 ____________________________________ Time: 04:53:32 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: Trip of Trips That's been on my list for years too. Put me down as interested. - Larry Bowen Larry@BowenAero.com http://BowenAero.com _____ From: DOUGPFLYRV@aol.com [mailto:DOUGPFLYRV@aol.com] Sent: Sunday, October 08, 2006 1:21 PM Subject: Re: RVSouthEast-List: Trip of Trips I am hoping to go west next Sept. to Van's homecoming plus the other interesting stops. Plan on 2 weeks. Anyone interested in that time frame? Doug Preston BHM ________________________________ Message 16 ____________________________________ Time: 05:14:39 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Great. Thx, Lori. - Larry Bowen Larry@BowenAero.com http://BowenAero.com _____ From: dwmillsap@netzero.net [mailto:dwmillsap@netzero.net] Sent: Sunday, October 08, 2006 7:26 AM Subject: Re: RVSouthEast-List: Goldsboro Wings Weekend, RV Seminar, Nov 4th Yes, Dennis is committed to this event...he had obligated himself to be there before the list discussion due to his connection through the university or the local EAA chapter (I don't know which). Anyway, he has already arranged to deliver his plane on Friday with me as ground crew, then pick it up on Sunday with someone else driving him down. Count on him to be there. You can email him at millsapd@ecu.edu if you want to discuss specifics, or call him at work at 252-328-6597. Lori -- "Larry Bowen" wrote: --> RVSouthEast-List message posted by: "Larry Bowen" In response to the email below, the following folks showed an interest back in August: Bill Repucci, Ron Schreck, Steve Glasgow, Denis Millsap, Dale Ensing, Paul D. Franzon & Len Leggette. We are less than a month away now. Is everyone still in? I have a slight complication in that my conditional inspection is due by then end of Oct, so unless I get cracking on it, my plane will likely be in pieces in November. - Larry Bowen Larry@BowenAero.com http://BowenAero.com ================================ Aug 5th: I got a call from the FAA the other day. Before I could voice my alibi, he told me it was regarding the Wings Weekend on November 4th at Goldsboro, NC. He's looking for a couple volunteers to do presentation on the RV's and what it takes to build and fly them. Sort of like the presentation Len and I did for the Winston-Salem airport group a couple months ago. I told him I would ask the group if anyone was available/interested. It would be a 40-50 minute presentation in a classroom type environment. Maybe a slideshow, questions from the attendees, etc. I'm thinking 3-4 people who are well into their kit or flying would be good. Who would&n================================================ - The RVSouthEast-List Emaimany List utilities such as the Subscripti================================================ - NEW MATRONIC now also available via the Web Forum========================sp; - NEW nfo to the Matronics Email List Wiki! _================================================ - List Contribution&p; &nbs====================================================== ________________________________ Message 17 ____________________________________ Time: 05:32:49 PM PST US From: "Ed Anderson" Subject: Re: RVSouthEast-List: Drill bits Craig, I used cobalt drill bits, drill slowly - like 200-300 rpm, use oil. Spinning too fast can further harden the metal in the hole you are drilling as well as dull your bit. Ed Ed Anderson Rv-6A N494BW Rotary Powered Matthews, NC eanderson@carolina.rr.com http://members.cox.net/rogersda/rotary/configs.htm#N494BW http://www.dmack.net/mazda/index.html ----- Original Message ----- From: Craig To: rv-list@matronics.com ; rvsoutheast-list@matronics.com Sent: Sunday, October 08, 2006 5:36 PM Subject: RVSouthEast-List: Drill bits I just ran through about a half dozen drill bits drilling the cotter pin holes in one wheel axle of my RV8A. That is some tough steel! Does anyone have a suggestion on what kind of drill bits to use here? There has got to be something tougher than the "titanium" bits I got at Lowes. Thanks, Craig Gallenbach RV8A ...... trying to get it on the gear ________________________________ Message 18 ____________________________________ Time: 05:38:34 PM PST US From: bill crothers Subject: RE: RVSouthEast-List: Trip of Trips --> RVSouthEast-List message posted by: bill crothers As a warm-up to a longer trip or 2 next spring/fall, I suggest a trip to Key West for a long wkend in January. Much to do and no surly aviation bureaucrats like I've encountered in Bahamas. If interested, pls. advise and I can start researching places to stay. Reno Red. --- Larry Bowen wrote: > That's been on my list for years too. Put me down > as interested. > > > - > Larry Bowen > Larry@BowenAero.com > http://BowenAero.com > > > > > > _____ > > From: DOUGPFLYRV@aol.com [mailto:DOUGPFLYRV@aol.com] > > Sent: Sunday, October 08, 2006 1:21 PM > To: rvsoutheast-list@matronics.com > Subject: Re: RVSouthEast-List: Trip of Trips > > > > I am hoping to go west next Sept. to Van's > homecoming plus the other > interesting stops. Plan on 2 weeks. Anyone > interested in that time frame? > Doug Preston > BHM > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > __________________________________________________ ________________________________ Message 19 ____________________________________ Time: 05:57:48 PM PST US From: "Larry Bowen" Subject: RE: RVSouthEast-List: Trip of Trips --> RVSouthEast-List message posted by: "Larry Bowen" FL in Jan sounds good to me. I think Len was going to look into a houseboat adventure down there too..... - Larry Bowen Larry@BowenAero.com http://BowenAero.com > -----Original Message----- > From: bill crothers [mailto:bill28104@yahoo.com] > Sent: Sunday, October 08, 2006 8:06 PM > To: rvsoutheast-list@matronics.com > Subject: RE: RVSouthEast-List: Trip of Trips > > --> RVSouthEast-List message posted by: bill crothers > --> > > As a warm-up to a longer trip or 2 next spring/fall, I > suggest a trip to Key West for a long wkend in January. Much > to do and no surly aviation bureaucrats like I've encountered > in Bahamas. If interested, pls. > advise and I can start researching places to stay. > Reno Red. > > --- Larry Bowen wrote: > > > That's been on my list for years too. Put me down as interested. > > > > > > - > > Larry Bowen > > Larry@BowenAero.com > > http://BowenAero.com > > > > > > > > > > > > _____ > > > > From: DOUGPFLYRV@aol.com [mailto:DOUGPFLYRV@aol.com] > > > > Sent: Sunday, October 08, 2006 1:21 PM > > To: rvsoutheast-list@matronics.com > > Subject: Re: RVSouthEast-List: Trip of Trips > > > > > > > > I am hoping to go west next Sept. to Van's homecoming plus > the other > > interesting stops. Plan on 2 weeks. Anyone interested in that time > > frame? > > Doug Preston > > BHM > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > __________________________________________________ > > Photoshare, and much much more: > > > ________________________________ Message 20 ____________________________________ Time: 06:38:09 PM PST US From: TWOBARBEE@wmconnect.com Subject: Re: RVSouthEast-List: Trip of Trips Put me down as interested. Mike Barbee ________________________________ Message 21 ____________________________________ Time: 06:44:54 PM PST US From: "tadsargent" Subject: Re: RVSouthEast-List: Drill bits I found cobalt bits work well. Keep them lubed with marvel mystery oil and drill slowely. Tad Sargent 7A 155hrs ----- Original Message ----- From: Craig To: rv-list@matronics.com ; rvsoutheast-list@matronics.com Sent: Sunday, October 08, 2006 5:36 PM Subject: RVSouthEast-List: Drill bits I just ran through about a half dozen drill bits drilling the cotter pin holes in one wheel axle of my RV8A. That is some tough steel! Does anyone have a suggestion on what kind of drill bits to use here? There has got to be something tougher than the "titanium" bits I got at Lowes. Thanks, Craig Gallenbach RV8A ...... trying to get it on the gear ________________________________ Message 22 ____________________________________ Time: 08:56:18 PM PST US From: "ben burril" Subject: Re: RVSouthEast-List: Drill bits Yeah go get you a dollar masonary bit,it will drill though it. ----- Original Message ----- From: tadsargent To: rvsoutheast-list@matronics.com Sent: Sunday, October 08, 2006 9:44 PM Subject: Re: RVSouthEast-List: Drill bits I found cobalt bits work well. Keep them lubed with marvel mystery oil and drill slowely. Tad Sargent 7A 155hrs ----- Original Message ----- From: Craig To: rv-list@matronics.com ; rvsoutheast-list@matronics.com Sent: Sunday, October 08, 2006 5:36 PM Subject: RVSouthEast-List: Drill bits I just ran through about a half dozen drill bits drilling the cotter pin holes in one wheel axle of my RV8A. That is some tough steel! Does anyone have a suggestion on what kind of drill bits to use here? There has got to be something tougher than the "titanium" bits I got at Lowes. Thanks, Craig Gallenbach RV8A ...... trying to get it on the gear href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.m atronics.com/Navigator?RVSouthEast-List