Today's Message Index:
----------------------
1. 05:16 AM - Re: (Bill Repucci)
2. 05:30 AM - Re: (bill crothers)
3. 05:57 AM - windy day (Bill Boyd)
4. 05:57 AM - Re: (Radomir Zaric)
5. 06:33 AM - Re: (bill crothers)
6. 07:35 AM - Re: (bburril)
7. 01:58 PM - Re: windy day (Steve Crimm)
8. 02:46 PM - Re: (Bill Repucci)
9. 03:48 PM - Re: (bill crothers)
10. 07:25 PM - Re: windy day (Bill Boyd)
11. 07:32 PM - Re: windy day (Steve Crimm)
12. 07:51 PM - Re: (Bill Repucci)
13. 07:52 PM - Re: windy day (Bill Boyd)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
NP. Heading out there today to see if it is empty.
Bill
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
bburril
Sent: Saturday, January 20, 2007 12:05 AM
Subject: Re: RVSouthEast-List:
Yes i would like to move to your hanger.Have you got it all cleaned
out?I would be nexd weekend as i'am going to florida for a couple days.
----- Original Message -----
From: Bill Repucci <mailto:bill@repucci.com>
Sent: Friday, January 19, 2007 10:07 PM
Subject: RE: RVSouthEast-List:
Ben,
I thought it would be best to take them that way. You never know what
kind of freaks like you might be surfing the net. ;)
Bill
PS. Do you still want to move your -6 to my hanger?
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
bburril
Sent: Friday, January 19, 2007 8:01 PM
Subject: Re: RVSouthEast-List:
Hey Bill,thanks for making those pictures of you and rad far off.
----- Original Message -----
From: Bill Repucci <mailto:bill@repucci.com>
Sent: Friday, January 19, 2007 7:48 PM
Subject: RVSouthEast-List:
Larry,
Did you get my reply?
If not, here it is...
>Larry, (I can't reply to the list from this account, thus the private
email.)
>
>They are just braided stainless steel lines with the proper AN fitting
(AN4). Nothing special, any speed shop should be able to create them.
>
>I bought mine from <http://www.bsrproducts.com/>
http://www.bsrproducts.com/, which is a local company. Give them a
call, 704-662-0901, tell them the size and length and they will have
them out to you shortly. Ask them to pressure test the lines for you,
that will save you a lot of time. The two longer lines you saw running
down my gear legs and one 14" section for the peddles cost something
like $57 +/-. (I reused one of the 12" lines on the other brake peddle
and replaced the ones I made.) No more leaks of any kind.
>
>BTW, Tad Sargent used the same time line inside his plane so he didn't
have to bend anything.
>
>Bill
>
>
>-----Original Message-----
>>From: Larry Rosen < <mailto:LarryRosen@comcast.net>
LarryRosen@comcast.net>
>>Sent: Jan 16, 2007 10:55 PM
>>To: <mailto:rv9-list@matronics.com> rv9-list@matronics.com
>>Subject: Re: RV9-List: Brake lines
>>
>>--> RV9-List message posted by: Larry Rosen <
<mailto:LarryRosen@comcast.net> LarryRosen@comcast.net>
>>
>>Bill,
>>Saw your photos here < <http://www.repucci.com/bill/fuselage_pg3.html>
http://www.repucci.com/bill/fuselage_pg3.html>.
>>Do you have any specifics on the brake lines you used? Vendor,
>>Manufacture, Model?
>>
>>Larry Rosen
>>RV-10 N205EN (reserved)
>>
>>
>>Bill Repucci wrote:
>>> --> RV9-List message posted by: "Bill Repucci" <
<mailto:bill@repucci.com> bill@repucci.com>
>>>
>>> Good advice!
>>>
>>> Realizing the brake lines on the -9A are different than on the -9
here
>>> is my experience with the -9.
>>>
>>> I did not like the idea of the loop around the brake so I elected to
run
>>> the hard line down the gear leg and transition to a 12" section of
>>> stainless steel flex line. Look great, easy enough to do, etc.
but...
>>>
>>> The fairing would not fit over the union. So, off came those brake
>>> lines and they were replaced with flex lines from the firewall down
to
>>> the brake. Much easier installation. I'll post pictures on my web
site
>>> in a few days. Busy with work right now.
>>>
>>> Bill
>>>
>>> -----Original Message-----
>>> From: <mailto:owner-rv9-list-server@matronics.com>
owner-rv9-list-server@matronics.com
>>> [mailto:owner-rv9-list-server@matronics.com] On Behalf Of Michael
Ice
>>> Sent: Monday, December 11, 2006 3:07 PM
>>> To: <mailto:rv9-list@matronics.com> rv9-list@matronics.com
>>> Subject: Re: RV9-List: Brake lines
>>>
>>>
>>> --> RV9-List message posted by: Michael Ice < <mailto:aurbo@ak.net>
aurbo@ak.net>
>>>
>>> Wayne,
>>>
>>> If you order the brake lines now don't forget to get the firewall
>>> doubler plate. You will still have access to the brake/rudder pedals
for
>>> a long time but it easier to do now. Don't rivet on the front deck
until
>>> you are absolutely sure you don't or won't need any more access to
the
>>> front area.
>>>
>>> Mike Ice
>>> RV-9 Wiring, wiring, wiring
>>>
>>> ----- Original Message -----
>>> From: Wayne < <mailto:wowens@darientel.net> wowens@darientel.net>
>>> Date: Monday, December 11, 2006 10:45 am
>>> Subject: Re: RV9-List: Brake lines
>>> To: <mailto:rv9-list@matronics.com> rv9-list@matronics.com
>>>
>>>
>>>> --> RV9-List message posted by: "Wayne" <
<mailto:wowens@darientel.net> wowens@darientel.net>
>>>>
>>>> Thanks all.
>>>> I called Vans this morning and they told me the brake lines come
>>>> in the
>>>> finishing kit . The fellow who answered my call couldn't
>>>> understand the
>>>> logic of " why the finishing kit not the fuselage kit" either. It
>>>> sure looks
>>>> like it would be easier now than after I have stacked a bunch of
>>>> aluminum on
>>>> top of the pedals.
>>>> ----- Original Message -----
>>>> From: "John Castor" < <mailto:rjcastor@knology.net>
rjcastor@knology.net>
>>>> To: < <mailto:rv9-list@matronics.com> rv9-list@matronics.com>
>>>> Sent: Monday, December 11, 2006 9:41 AM
>>>> Subject: Re: RV9-List: Brake lines
>>>>
>>>>
>>>>
>>>>> --> RV9-List message posted by: "John Castor" <
<mailto:rjcastor@knology.net> rjcastor@knology.net>
>>>>>
>>>>> Wayne,
>>>>> I'm at the same placeinstalling brake lines. I have no part
>>>>>
>>>> labeled VA 188
>>>>
>>>>> but do have a VA 118 which came with the finish kit. These lines
>>>>>
>>>> go from
>>>>
>>>>> pedals to firewall connection. My plans also call for aluminum
>>>>>
>>>> tube from
>>>>
>>>>> gear mount to wheel brake. I have considered flexible for this
>>>>>
>>>> connection.> John Castor
>>>>
>>>>> ----- Original Message -----
>>>>> From: < <mailto:dthomas773@sbcglobal.net>
dthomas773@sbcglobal.net>
>>>>> To: < <mailto:rv9-list@matronics.com> rv9-list@matronics.com>
>>>>> Sent: Sunday, December 10, 2006 9:11 PM
>>>>> Subject: Re: RV9-List: Brake lines
>>>>>
>>>>>
>>>>>
>>>>>> --> RV9-List message posted by: <
<mailto:dthomas773@sbcglobal.net> dthomas773@sbcglobal.net>
>>>>>>
>>>>>> Hi Wayne,
>>>>>> Unless they have changed, flexible brake lines are not provivded.
>>>>>> The instructions will tell you ( at least mine did )that you use
>>>>>> 1/4 inch aluminum tube and create a half loop at the end and then
>>>>>> hook it directly to the brake. I had a local shop fabricate
>>>>>> 18 inch flex lines.
>>>>>>
>>>>>> Dennis Thomas
>>>>>> --- Wayne < <mailto:wowens@darientel.net> wowens@darientel.net>
wrote:
>>>>>>
>>>>>>
>>>>>>> My quick build RV9A kit appears to be short two flexible brake
>>>>>>> lines (VA188). Do those come with the finishing kit instead?
>>>>>>>
>>>>>>> Thanks for the guidance on the fuel return system everyone.
>>>>>>> Wayne
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>> 12/09/2006
>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Features 7-Day Browse,
href="http://www.matronics.com/Navigator?RV9-List">http://www.matronics.
com/Navigator?RV9-List
<http://forums.matronics.com> http://forums.matronics.com
>>
>>
>>
>
>
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.ma
tronics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.ma
tronics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.ma
tronics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
have oil here, will take to Goose this afternoon. Its
$43/ case incl. tax.
--- Bill Repucci <bill@repucci.com> wrote:
> NP. Heading out there today to see if it is empty.
>
> Bill
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> On Behalf Of
> bburril
> Sent: Saturday, January 20, 2007 12:05 AM
> To: rvsoutheast-list@matronics.com
> Subject: Re: RVSouthEast-List:
>
>
> Yes i would like to move to your hanger.Have you got
> it all cleaned
> out?I would be nexd weekend as i'am going to florida
> for a couple days.
>
> ----- Original Message -----
> From: Bill Repucci <mailto:bill@repucci.com>
> To: rvsoutheast-list@matronics.com
> Sent: Friday, January 19, 2007 10:07 PM
> Subject: RE: RVSouthEast-List:
>
> Ben,
>
> I thought it would be best to take them that way.
> You never know what
> kind of freaks like you might be surfing the net.
> ;)
>
> Bill
>
> PS. Do you still want to move your -6 to my hanger?
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> On Behalf Of
> bburril
> Sent: Friday, January 19, 2007 8:01 PM
> To: rvsoutheast-list@matronics.com
> Subject: Re: RVSouthEast-List:
>
>
> Hey Bill,thanks for making those pictures of you and
> rad far off.
>
> ----- Original Message -----
> From: Bill Repucci <mailto:bill@repucci.com>
> To: rvsoutheast-list@matronics.com ;
> LarryRosen@comcast.net
> Sent: Friday, January 19, 2007 7:48 PM
> Subject: RVSouthEast-List:
>
> Larry,
>
> Did you get my reply?
>
> If not, here it is...
>
> >Larry, (I can't reply to the list from this
> account, thus the private
> email.)
> >
> >They are just braided stainless steel lines with
> the proper AN fitting
> (AN4). Nothing special, any speed shop should be
> able to create them.
> >
> >I bought mine from <http://www.bsrproducts.com/>
> http://www.bsrproducts.com/, which is a local
> company. Give them a
> call, 704-662-0901, tell them the size and length
> and they will have
> them out to you shortly. Ask them to pressure test
> the lines for you,
> that will save you a lot of time. The two longer
> lines you saw running
> down my gear legs and one 14" section for the
> peddles cost something
> like $57 +/-. (I reused one of the 12" lines on the
> other brake peddle
> and replaced the ones I made.) No more leaks of any
> kind.
> >
> >BTW, Tad Sargent used the same time line inside his
> plane so he didn't
> have to bend anything.
> >
> >Bill
> >
> >
> >
> >-----Original Message-----
> >>From: Larry Rosen <
> <mailto:LarryRosen@comcast.net>
> LarryRosen@comcast.net>
> >>Sent: Jan 16, 2007 10:55 PM
> >>To: <mailto:rv9-list@matronics.com>
> rv9-list@matronics.com
> >>Subject: Re: RV9-List: Brake lines
> >>
> >>--> RV9-List message posted by: Larry Rosen <
> <mailto:LarryRosen@comcast.net>
> LarryRosen@comcast.net>
> >>
> >>Bill,
> >>Saw your photos here <
> <http://www.repucci.com/bill/fuselage_pg3.html>
> http://www.repucci.com/bill/fuselage_pg3.html>.
> >>Do you have any specifics on the brake lines you
> used? Vendor,
> >>Manufacture, Model?
> >>
> >>Larry Rosen
> >>RV-10 N205EN (reserved)
> >>
> >>
> >>Bill Repucci wrote:
> >>> --> RV9-List message posted by: "Bill Repucci" <
> <mailto:bill@repucci.com> bill@repucci.com>
> >>>
> >>> Good advice!
> >>>
> >>> Realizing the brake lines on the -9A are
> different than on the -9
> here
> >>> is my experience with the -9.
> >>>
> >>> I did not like the idea of the loop around the
> brake so I elected to
> run
> >>> the hard line down the gear leg and transition
> to a 12" section of
> >>> stainless steel flex line. Look great, easy
> enough to do, etc.
> but...
> >>>
> >>> The fairing would not fit over the union. So,
> off came those brake
> >>> lines and they were replaced with flex lines
> from the firewall down
> to
> >>> the brake. Much easier installation. I'll post
> pictures on my web
> site
> >>> in a few days. Busy with work right now.
> >>>
> >>> Bill
> >>>
> >>> -----Original Message-----
> >>> From:
> <mailto:owner-rv9-list-server@matronics.com>
> owner-rv9-list-server@matronics.com
> >>> [mailto:owner-rv9-list-server@matronics.com] On
> Behalf Of Michael
> Ice
> >>> Sent: Monday, December 11, 2006 3:07 PM
> >>> To: <mailto:rv9-list@matronics.com>
> rv9-list@matronics.com
> >>> Subject: Re: RV9-List: Brake lines
> >>>
> >>>
> >>> --> RV9-List message posted by: Michael Ice <
> <mailto:aurbo@ak.net>
> aurbo@ak.net>
> >>>
> >>> Wayne,
> >>>
> >>> If you order the brake lines now don't forget to
> get the firewall
> >>> doubler plate. You will still have access to the
> brake/rudder pedals
> for
> >>> a long time but it easier to do now. Don't rivet
> on the front deck
> until
> >>> you are absolutely sure you don't or won't need
> any more access to
> the
> >>> front area.
> >>>
> >>> Mike Ice
> >>> RV-9 Wiring, wiring, wiring
> >>>
> >>> ----- Original Message -----
> >>> From: Wayne < <mailto:wowens@darientel.net>
> wowens@darientel.net>
> >>> Date: Monday, December 11, 2006 10:45 am
> >>> Subject: Re: RV9-List: Brake lines
> >>> To: <mailto:rv9-list@matronics.com>
> rv9-list@matronics.com
> >>>
> >>>
> >>>> --> RV9-List message posted by: "Wayne" <
> <mailto:wowens@darientel.net> wowens@darientel.net>
> >>>>
> >>>> Thanks all.
> >>>> I called Vans this morning and they told me the
> brake
=== message truncated ==
Need a quick answer? Get one in minutes from people who know.
Ask your question on www.Answers.yahoo.com
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Under a wind advisory up here until noon, then looking at 70% chance
of snow/sleet tomorrow. Winter has come to the mountains. Miriam
just called in from the road and reported that the price of "avgas" at
the local filling station has dropped overnight to $2.09/gallon. Not
too bad compared to what it's been lately. After the 15 cent/gallon
state tax rebate for offroad use, that brings 93 octane in under two
bucks. I can fly on that :-) Just have to test a batch and be sure
no ethanol has begun to creep into the local supply.
Looks like I'll be ferrying gas this weekend and wishing I was in
Florida logging flight time. At least I have no worries about trying
to get home. Best wishes to all the travelers. Fly safe, gang.
-Stormy
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
What time are you guys gonna be there?
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of bill
crothers
Sent: Saturday, January 20, 2007 8:29 AM
Subject: RE: RVSouthEast-List:
have oil here, will take to Goose this afternoon. Its
$43/ case incl. tax.
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I'll be at Goose by 1 pm.
--- Radomir Zaric <vitez@carolina.rr.com> wrote:
> Zaric" <vitez@carolina.rr.com>
>
> What time are you guys gonna be there?
>
>
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> On Behalf Of bill
> crothers
> Sent: Saturday, January 20, 2007 8:29 AM
> To: rvsoutheast-list@matronics.com
> Subject: RE: RVSouthEast-List:
>
> crothers <bill28104@yahoo.com>
>
> have oil here, will take to Goose this afternoon.
> Its
> $43/ case incl. tax.
>
>
>
>
> browse
> Subscriptions page,
> FAQ,
> http://www.matronics.com/Navigator?RVSouthEast-List
>
> Web Forums!
>
>
>
>
>
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: thEast-List: |
MessageSounds good talk to you about friday
----- Original Message -----
From: Bill Repucci
To: rvsoutheast-list@matronics.com
Sent: Saturday, January 20, 2007 8:16 AM
Subject: RE: RVSouthEast-List:
NP. Heading out there today to see if it is empty.
Bill
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
bburril
Sent: Saturday, January 20, 2007 12:05 AM
To: rvsoutheast-list@matronics.com
Subject: Re: RVSouthEast-List:
Yes i would like to move to your hanger.Have you got it all cleaned
out?I would be nexd weekend as i'am going to florida for a couple days.
----- Original Message -----
From: Bill Repucci
To: rvsoutheast-list@matronics.com
Sent: Friday, January 19, 2007 10:07 PM
Subject: RE: RVSouthEast-List:
Ben,
I thought it would be best to take them that way. You never know
what kind of freaks like you might be surfing the net. ;)
Bill
PS. Do you still want to move your -6 to my hanger?
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of
bburril
Sent: Friday, January 19, 2007 8:01 PM
To: rvsoutheast-list@matronics.com
Subject: Re: RVSouthEast-List:
Hey Bill,thanks for making those pictures of you and rad far off.
----- Original Message -----
From: Bill Repucci
To: rvsoutheast-list@matronics.com ; LarryRosen@comcast.net
Sent: Friday, January 19, 2007 7:48 PM
Subject: RVSouthEast-List:
Larry,
Did you get my reply?
If not, here it is...
>Larry, (I can't reply to the list from this account, thus the
private email.)
>
>They are just braided stainless steel lines with the proper AN
fitting (AN4). Nothing special, any speed shop should be able to create
them.
>
>I bought mine from http://www.bsrproducts.com/, which is a local
company. Give them a call, 704-662-0901, tell them the size and length
and they will have them out to you shortly. Ask them to pressure test
the lines for you, that will save you a lot of time. The two longer
lines you saw running down my gear legs and one 14" section for the
peddles cost something like $57 +/-. (I reused one of the 12" lines on
the other brake peddle and replaced the ones I made.) No more leaks of
any kind.
>
>BTW, Tad Sargent used the same time line inside his plane so he
didn't have to bend anything.
>
>Bill
>
>
>
>-----Original Message-----
>>From: Larry Rosen <LarryRosen@comcast.net>
>>Sent: Jan 16, 2007 10:55 PM
>>To: rv9-list@matronics.com
>>Subject: Re: RV9-List: Brake lines
>>
>>--> RV9-List message posted by: Larry Rosen
<LarryRosen@comcast.net>
>>
>>Bill,
>>Saw your photos here
<http://www.repucci.com/bill/fuselage_pg3.html>.
>>Do you have any specifics on the brake lines you used? Vendor,
>>Manufacture, Model?
>>
>>Larry Rosen
>>RV-10 N205EN (reserved)
>>
>>
>>Bill Repucci wrote:
>>> --> RV9-List message posted by: "Bill Repucci"
<bill@repucci.com>
>>>
>>> Good advice!
>>>
>>> Realizing the brake lines on the -9A are different than on the
-9 here
>>> is my experience with the -9.
>>>
>>> I did not like the idea of the loop around the brake so I
elected to run
>>> the hard line down the gear leg and transition to a 12"
section of
>>> stainless steel flex line. Look great, easy enough to do,
etc. but...
>>>
>>> The fairing would not fit over the union. So, off came those
brake
>>> lines and they were replaced with flex lines from the firewall
down to
>>> the brake. Much easier installation. I'll post pictures on
my web site
>>> in a few days. Busy with work right now.
>>>
>>> Bill
>>>
>>> -----Original Message-----
>>> From: owner-rv9-list-server@matronics.com
>>> [mailto:owner-rv9-list-server@matronics.com] On Behalf Of
Michael Ice
>>> Sent: Monday, December 11, 2006 3:07 PM
>>> To: rv9-list@matronics.com
>>> Subject: Re: RV9-List: Brake lines
>>>
>>>
>>> --> RV9-List message posted by: Michael Ice <aurbo@ak.net>
>>>
>>> Wayne,
>>>
>>> If you order the brake lines now don't forget to get the
firewall
>>> doubler plate. You will still have access to the brake/rudder
pedals for
>>> a long time but it easier to do now. Don't rivet on the front
deck until
>>> you are absolutely sure you don't or won't need any more
access to the
>>> front area.
>>>
>>> Mike Ice
>>> RV-9 Wiring, wiring, wiring
>>>
>>> ----- Original Message -----
>>> From: Wayne <wowens@darientel.net>
>>> Date: Monday, December 11, 2006 10:45 am
>>> Subject: Re: RV9-List: Brake lines
>>> To: rv9-list@matronics.com
>>>
>>>
>>>> --> RV9-List message posted by: "Wayne"
<wowens@darientel.net>
>>>>
>>>> Thanks all.
>>>> I called Vans this morning and they told me the brake lines
come
>>>> in the
>>>> finishing kit . The fellow who answered my call couldn't
>>>> understand the
>>>> logic of " why the finishing kit not the fuselage kit"
either. It
>>>> sure looks
>>>> like it would be easier now than after I have stacked a bunch
of
>>>> aluminum on
>>>> top of the pedals.
>>>> ----- Original Message -----
>>>> From: "John Castor" <rjcastor@knology.net>
>>>> To: <rv9-list@matronics.com>
>>>> Sent: Monday, December 11, 2006 9:41 AM
>>>> Subject: Re: RV9-List: Brake lines
>>>>
>>>>
>>>>
>>>>> --> RV9-List message posted by: "John Castor"
<rjcastor@knology.net>
>>>>>
>>>>> Wayne,
>>>>> I'm at the same placeinstalling brake lines. I have no part
>>>>>
>>>> labeled VA 188
>>>>
>>>>> but do have a VA 118 which came with the finish kit. These
lines
>>>>>
>>>> go from
>>>>
>>>>> pedals to firewall connection. My plans also call for
aluminum
>>>>>
>>>> tube from
>>>>
>>>>> gear mount to wheel brake. I have considered flexible for
this
>>>>>
>>>> connection.> John Castor
>>>>
>>>>> ----- Original Message -----
>>>>> From: <dthomas773@sbcglobal.net>
>>>>> To: <rv9-list@matronics.com>
>>>>> Sent: Sunday, December 10, 2006 9:11 PM
>>>>> Subject: Re: RV9-List: Brake lines
>>>>>
>>>>>
>>>>>
>>>>>> --> RV9-List message posted by: <dthomas773@sbcglobal.net>
>>>>>>
>>>>>> Hi Wayne,
>>>>>> Unless they have changed, flexible brake lines are not
provivded.
>>>>>> The instructions will tell you ( at least mine did )that
you use
>>>>>> 1/4 inch aluminum tube and create a half loop at the end
and then
>>>>>> hook it directly to the brake. I had a local shop
fabricate
>>>>>> 18 inch flex lines.
>>>>>>
>>>>>> Dennis Thomas
>>>>>> --- Wayne <wowens@darientel.net> wrote:
>>>>>>
>>>>>>
>>>>>>> My quick build RV9A kit appears to be short two flexible
brake
>>>>>>> lines (VA188). Do those come with the finishing kit
instead?
>>>>>>>
>>>>>>> Thanks for the guidance on the fuel return system
everyone.
>>>>>>> Wayne
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>> 12/09/2006
>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Features 7-Day Browse,
href="http://www.matronics.com/Navigator?RV9-List">http://www.matronics
.com/Navigator?RV9-List
http://forums.matronics.com
>>
>>
>>
>
>
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.m
atronics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.m
atronics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.m
atronics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www.m
atronics.com/Navigator?RVSouthEast-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Here in Atlanta the "Avgas" price at the filling station is 1.99 and at
Sam's Club it was 1.93.
Steve
An RV want to be that owns a Europa XS which is for sale.
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill Boyd
Sent: Saturday, January 20, 2007 08:58
Subject: RVSouthEast-List: windy day
--> <sportav8r@gmail.com>
Under a wind advisory up here until noon, then looking at 70% chance of
snow/sleet tomorrow. Winter has come to the mountains. Miriam just called
in from the road and reported that the price of "avgas" at the local filling
station has dropped overnight to $2.09/gallon. Not too bad compared to what
it's been lately. After the 15 cent/gallon state tax rebate for offroad
use, that brings 93 octane in under two bucks. I can fly on that :-) Just
have to test a batch and be sure no ethanol has begun to creep into the
local supply.
Looks like I'll be ferrying gas this weekend and wishing I was in Florida
logging flight time. At least I have no worries about trying to get home.
Best wishes to all the travelers. Fly safe, gang.
-Stormy
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill,
I was there before you, did you get the check I left you for the first
case?
Let me know the next time you are out there so we can hook up. BTW, I
like the trim you added to your -8.
Bill
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of bill
crothers
Sent: Saturday, January 20, 2007 9:33 AM
Subject: RE: RVSouthEast-List:
--> <bill28104@yahoo.com>
I'll be at Goose by 1 pm.
--- Radomir Zaric <vitez@carolina.rr.com> wrote:
> Zaric" <vitez@carolina.rr.com>
>
> What time are you guys gonna be there?
>
>
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> On Behalf Of bill
> crothers
> Sent: Saturday, January 20, 2007 8:29 AM
> To: rvsoutheast-list@matronics.com
> Subject: RE: RVSouthEast-List:
>
> crothers <bill28104@yahoo.com>
>
> have oil here, will take to Goose this afternoon.
> Its
> $43/ case incl. tax.
>
>
>
>
> browse
> Subscriptions page,
> FAQ,
> http://www.matronics.com/Navigator?RVSouthEast-List
>
> Web Forums!
>
>
>
>
>
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo!
Games. http://videogames.yahoo.com/platform?platform=120121
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Yep, got it, only I forgot to incl. tax of $3. Incl.
it w/ next case. It'll be in Tads hangar.
--- Bill Repucci <bill@repucci.com> wrote:
> Repucci" <bill@repucci.com>
>
> Bill,
>
> I was there before you, did you get the check I left
> you for the first
> case?
>
> Let me know the next time you are out there so we
> can hook up. BTW, I
> like the trim you added to your -8.
>
> Bill
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> On Behalf Of bill
> crothers
> Sent: Saturday, January 20, 2007 9:33 AM
> To: rvsoutheast-list@matronics.com
> Subject: RE: RVSouthEast-List:
>
>
> crothers
> --> <bill28104@yahoo.com>
>
> I'll be at Goose by 1 pm.
> --- Radomir Zaric <vitez@carolina.rr.com> wrote:
>
> > Zaric" <vitez@carolina.rr.com>
> >
> > What time are you guys gonna be there?
> >
> >
> >
> > -----Original Message-----
> > From: owner-rvsoutheast-list-server@matronics.com
> >
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> > On Behalf Of bill
> > crothers
> > Sent: Saturday, January 20, 2007 8:29 AM
> > To: rvsoutheast-list@matronics.com
> > Subject: RE: RVSouthEast-List:
> >
> > crothers <bill28104@yahoo.com>
> >
> > have oil here, will take to Goose this afternoon.
> > Its
> > $43/ case incl. tax.
> >
> >
> >
> >
> > browse
> > Subscriptions page,
> > FAQ,
> >
> http://www.matronics.com/Navigator?RVSouthEast-List
> >
> > Web Forums!
> >
> >
> >
> >
> >
>
>
>
>
> Be a PS3 game guru.
> Get your game face on with the latest PS3 news and
> previews at Yahoo!
> Games.
> http://videogames.yahoo.com/platform?platform=120121
>
>
>
>
>
>
> browse
> Subscriptions page,
> FAQ,
> http://www.matronics.com/Navigator?RVSouthEast-List
>
> Web Forums!
>
>
>
>
>
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Steve,
before you start feeling too sorry for me, I was referring to hi-test
premium 93 octane mogas. Are they selling that for 1.93 at Sam's?
-Stormy
On 1/20/07, Steve Crimm <steve.crimm@stephenscott.com> wrote:
>
> Here in Atlanta the "Avgas" price at the filling station is 1.99 and at
> Sam's Club it was 1.93.
>
> Steve
>
> An RV want to be that owns a Europa XS which is for sale.
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill Boyd
> Sent: Saturday, January 20, 2007 08:58
> To: rvsoutheast-list@matronics.com
> Subject: RVSouthEast-List: windy day
>
> --> <sportav8r@gmail.com>
>
> Under a wind advisory up here until noon, then looking at 70% chance of
> snow/sleet tomorrow. Winter has come to the mountains. Miriam just called
> in from the road and reported that the price of "avgas" at the local filling
> station has dropped overnight to $2.09/gallon. Not too bad compared to what
> it's been lately. After the 15 cent/gallon state tax rebate for offroad
> use, that brings 93 octane in under two bucks. I can fly on that :-) Just
> have to test a batch and be sure no ethanol has begun to creep into the
> local supply.
>
> Looks like I'll be ferrying gas this weekend and wishing I was in Florida
> logging flight time. At least I have no worries about trying to get home.
> Best wishes to all the travelers. Fly safe, gang.
>
> -Stormy
>
>
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
The 93 Octane stuff was going for 2.03
Steve
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill Boyd
Sent: Saturday, January 20, 2007 22:25
Subject: Re: RVSouthEast-List: windy day
--> <sportav8r@gmail.com>
Steve,
before you start feeling too sorry for me, I was referring to hi-test
premium 93 octane mogas. Are they selling that for 1.93 at Sam's?
-Stormy
On 1/20/07, Steve Crimm <steve.crimm@stephenscott.com> wrote:
> --> <steve.crimm@stephenscott.com>
>
> Here in Atlanta the "Avgas" price at the filling station is 1.99 and
> at Sam's Club it was 1.93.
>
> Steve
>
> An RV want to be that owns a Europa XS which is for sale.
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill
> Boyd
> Sent: Saturday, January 20, 2007 08:58
> To: rvsoutheast-list@matronics.com
> Subject: RVSouthEast-List: windy day
>
> --> <sportav8r@gmail.com>
>
> Under a wind advisory up here until noon, then looking at 70% chance
> of snow/sleet tomorrow. Winter has come to the mountains. Miriam
> just called in from the road and reported that the price of "avgas" at
> the local filling station has dropped overnight to $2.09/gallon. Not
> too bad compared to what it's been lately. After the 15 cent/gallon
> state tax rebate for offroad use, that brings 93 octane in under two
> bucks. I can fly on that :-) Just have to test a batch and be sure
> no ethanol has begun to creep into the local supply.
>
> Looks like I'll be ferrying gas this weekend and wishing I was in
> Florida logging flight time. At least I have no worries about trying to
get home.
> Best wishes to all the travelers. Fly safe, gang.
>
> -Stormy
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Will do & thanks!
-----Original Message-----
From: owner-rvsoutheast-list-server@matronics.com
[mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of bill
crothers
Sent: Saturday, January 20, 2007 6:48 PM
Subject: RE: RVSouthEast-List:
--> <bill28104@yahoo.com>
Yep, got it, only I forgot to incl. tax of $3. Incl.
it w/ next case. It'll be in Tads hangar.
--- Bill Repucci <bill@repucci.com> wrote:
> Repucci" <bill@repucci.com>
>
> Bill,
>
> I was there before you, did you get the check I left
> you for the first
> case?
>
> Let me know the next time you are out there so we
> can hook up. BTW, I
> like the trim you added to your -8.
>
> Bill
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> On Behalf Of bill
> crothers
> Sent: Saturday, January 20, 2007 9:33 AM
> To: rvsoutheast-list@matronics.com
> Subject: RE: RVSouthEast-List:
>
>
> crothers
> --> <bill28104@yahoo.com>
>
> I'll be at Goose by 1 pm.
> --- Radomir Zaric <vitez@carolina.rr.com> wrote:
>
> > Zaric" <vitez@carolina.rr.com>
> >
> > What time are you guys gonna be there?
> >
> >
> >
> > -----Original Message-----
> > From: owner-rvsoutheast-list-server@matronics.com
> >
> [mailto:owner-rvsoutheast-list-server@matronics.com]
> > On Behalf Of bill
> > crothers
> > Sent: Saturday, January 20, 2007 8:29 AM
> > To: rvsoutheast-list@matronics.com
> > Subject: RE: RVSouthEast-List:
> >
> > crothers <bill28104@yahoo.com>
> >
> > have oil here, will take to Goose this afternoon.
> > Its
> > $43/ case incl. tax.
> >
> >
> >
> >
> > browse
> > Subscriptions page,
> > FAQ,
> >
> http://www.matronics.com/Navigator?RVSouthEast-List
> >
> > Web Forums!
> >
> >
> >
> >
> >
>
>
>
>
> Be a PS3 game guru.
> Get your game face on with the latest PS3 news and
> previews at Yahoo!
> Games.
> http://videogames.yahoo.com/platform?platform=120121
>
>
>
>
>
>
> browse
> Subscriptions page,
> FAQ,
> http://www.matronics.com/Navigator?RVSouthEast-List
>
> Web Forums!
>
>
>
>
>
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo!
Games. http://videogames.yahoo.com/platform?platform=120121
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Good price, then. Up here, it's standard to see a 10-cent stagger
between grades, so regular at 1.93 means mid grade at 2.03 and super
at 2.13.
High-compression pistons = no more regular mogas for me; not at all
sure the hp boost was worth that sacrifice, let me tell you.
-Stormy
On 1/20/07, Steve Crimm <steve.crimm@stephenscott.com> wrote:
>
> The 93 Octane stuff was going for 2.03
>
> Steve
>
> -----Original Message-----
> From: owner-rvsoutheast-list-server@matronics.com
> [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill Boyd
> Sent: Saturday, January 20, 2007 22:25
> To: rvsoutheast-list@matronics.com
> Subject: Re: RVSouthEast-List: windy day
>
> --> <sportav8r@gmail.com>
>
> Steve,
>
> before you start feeling too sorry for me, I was referring to hi-test
> premium 93 octane mogas. Are they selling that for 1.93 at Sam's?
>
> -Stormy
>
> On 1/20/07, Steve Crimm <steve.crimm@stephenscott.com> wrote:
> > --> <steve.crimm@stephenscott.com>
> >
> > Here in Atlanta the "Avgas" price at the filling station is 1.99 and
> > at Sam's Club it was 1.93.
> >
> > Steve
> >
> > An RV want to be that owns a Europa XS which is for sale.
> >
> > -----Original Message-----
> > From: owner-rvsoutheast-list-server@matronics.com
> > [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill
> > Boyd
> > Sent: Saturday, January 20, 2007 08:58
> > To: rvsoutheast-list@matronics.com
> > Subject: RVSouthEast-List: windy day
> >
> > --> <sportav8r@gmail.com>
> >
> > Under a wind advisory up here until noon, then looking at 70% chance
> > of snow/sleet tomorrow. Winter has come to the mountains. Miriam
> > just called in from the road and reported that the price of "avgas" at
> > the local filling station has dropped overnight to $2.09/gallon. Not
> > too bad compared to what it's been lately. After the 15 cent/gallon
> > state tax rebate for offroad use, that brings 93 octane in under two
> > bucks. I can fly on that :-) Just have to test a batch and be sure
> > no ethanol has begun to creep into the local supply.
> >
> > Looks like I'll be ferrying gas this weekend and wishing I was in
> > Florida logging flight time. At least I have no worries about trying to
> get home.
> > Best wishes to all the travelers. Fly safe, gang.
> >
> > -Stormy
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|