---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Tue 01/29/08: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:36 AM - Re: new excellent fly-in eatery (Bill Boyd) 2. 09:46 AM - Re: new excellent fly-in eatery (Lenleg@aol.com) 3. 03:43 PM - Re: new excellent fly-in eatery (Scott Keadle) 4. 04:37 PM - Re: new excellent fly-in eatery (Bill Repucci) ________________________________ Message 1 _____________________________________ Time: 09:36:18 AM PST US From: "Bill Boyd" Subject: Re: RVSouthEast-List: new excellent fly-in eatery I used to fish with M-80's, too ;-) when we could get them from South Carolina. I seem to recall they were sold "under the counter" at certain fireworks stands along the highway to Florida, and my Dad had to pay premium price for them. Those were the days. -Stormy On Jan 28, 2008 11:47 PM, Bill Repucci wrote: > I'm thinking M-80's will work just fine. They are small and no > modification to the RV is required. > > ________________________________ Message 2 _____________________________________ Time: 09:46:06 AM PST US From: Lenleg@aol.com Subject: Re: RVSouthEast-List: new excellent fly-in eatery No problem ... same idea as golf clubs !! For anyone interested ... let me know. Len In a message dated 1/28/2008 9:15:04 PM Eastern Standard Time, bill28104@yahoo.com writes: Leggette made a golf club holder behind rear baggage, so a fishin stick should be easy stuff...right Legs? ----- Original Message ---- From: Bill Boyd Sent: Monday, January 28, 2008 8:48:57 PM Subject: Re: RVSouthEast-List: new excellent fly-in eatery Remove wingtip. Pass loose fitting capped pvc thinwall into a series of lightening holes spanwise. JB weld in place. Make darn sure this contraption does not come near your aileron pushrod stuff! Just an idea. Might also be able to sling it out of the way aft of the baggage bulkhead with same considerations for the elevator push tubes. Consulting the builder (Rick) might be wise. -Stormy On Jan 28, 2008 5:31 PM, JIM HIGGINS <_JHiggins@a1roofingandsiding.com_ (mailto:JHiggins@a1roofingandsiding.com) > wrote: Absolutely! Now I just have to figure out how to get a 9' rod into my plane. J Jim -----Original Message----- From: _owner-rvsoutheast-list-server@matronics.com_ (mailto:owner-rvsoutheast-list-server@matronics.com) [mailto:_owner-rvsoutheast-list-server@matronics.com_ (mailto:owner-rvsoutheast-list-server@matronics.com) ] On Behalf Of _tadsargent@bellsouth.net_ (mailto:tadsargent@bellsouth.net) Sent: Monday, January 28, 2008 5:20 PM Subject: RE: RVSouthEast-List: new excellent fly-in eatery Jim fly fishing is a hobby of mine as well. I would like to join you on a TN. trip or NC excursion. Tad Sargent -------------- Original message from "JIM HIGGINS" <_JHiggins@A1RoofingAndSiding.com_ (mailto:JHiggins@A1RoofingAndSiding.com) >: -------------- > > > Hi Ron. I've been flying a Titan Tornado the last couple of years, just > got my new 7 (purchased from Rick Gray in Ohio) a few months ago, and > loving it. Painting is scheduled in a few months. I have no experience > with formation, and just a little bit of aerobatics (loops/rolls). I > would be interested in ALL aspects of flying, and always looking to > learn more. > Also, in case anybody cares, I'm an avid fly fisherman, that's my other > hobby, and plan on flying up to Elizabethton, TN on occasion to soak a > couple of flies. > > Jim > > -----Original Message----- &g t; From: _owner-rvsoutheast-list-server@matronics.com_ (mailto:owner-rvsoutheast-list-server@matronics.com) > [mailto:_owner-rvsoutheast-list-server@matronics.com_ (mailto:owner-rvsoutheast-list-server@matronics.com) ] On Behalf Of Ron > Schreck > Sent: Monday, January 28, 2008 7:46 AM > To: _rvsoutheast-list@matronics.com_ (mailto:rvsoutheast-list@matronics.com) > Subject: Re: RVSouthEast-List: new excellent fly-in eatery > > > > Jim, > > There are lots of RV folks in the area and we get together for $100 > burgers, > cross-country trips, formation flying and aerobatics. Tell us your > background and interests and we'll gladly welcome you aboard. > > Ron Schreck > RV-8, "Miss Izzy" > Gold Hill Airpark, (NC25) > > ----- Original Message ----- > From: "bill crothers" > To: > Sent: Sunday, January 27, 2008 9:51 PM > Sub ject: Re: RVSouthEast-List: new excellent fly-in eatery > > > > --> RVSouthEast-List message posted by: bill crothers > > > > > > Give me a call at 704-560-1892...I'm the RV-8 military style on N. end > of > > 28A. Bill (Reno) > > > > ----- Original Message ---- > > From: JIM HIGGINS > > To: _rvsoutheast-list@matronics.com_ (mailto:rvsoutheast-list@matronics.com) > > Sent: Sunday, January 27, 2008 8:01:50 PM > > Subject: RE: RVSouthEast-List: new excellent fly-in eatery > > > > > > > > Hi group. As a new RV-7 owner in Charlotte, and new to this group, I > > haven't seen where many members are posting information about informal > > flying, or get togethers. I would love to meet up wit h locals for > > burgers, new places to eat, informal formation or just whatever. Hope > to > > see more posting, and to meet more of my fellow RVers out there. > > > > Jim Higgins > > 28A (Goose Creek) > > > > -----Original Message----- > > From: _owner-rvsoutheast-list-server@matronics.com_ (mailto:owner-rvsoutheast-list-server@matronics.com) > > [mailto:_owner-rvsoutheast-list-server@matronics.com_ (mailto:owner-rvsoutheast-list-server@matronics.com) ] On Behalf Of bill > > crothers > > Sent: Sunday, January 27, 2008 5:01 PM > > To: SERV > > Subject: RVSouthEast-List: new excellent fly-in eatery > > > > > > > > Several of us went to Carthage today for lunch on the field at 5nc3. > > Pik-n-Pig was excellent. Great food, great service and cool ambiance, > > set up like an old country store/post offic e. Rec es Nav - The RVSouthEast-List Email Forum - --> _http://www.matronics.com/Navigator?RVSouthEast-List_ (http://www.matronics.com/Navigator?RVSouthEast-List) - MATRONICS WEB FORUMS - --> _http://forums.matronics.com_ (http://forums.matronics.com/) - List Contribution Web Site - Thank you for your generous support! -Matt Dralle, List Admin. --> _http://www.matronics.com/contribution_ (http://www.matronics.com/contribution) ____________________________________ Be a better friend, newshound, and (http://www.matronics.com/Navigator?RVSouthEast-List) (http://www.matronics.com/contribution) **************Start the year off right. Easy ways to stay in shape. http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489 ________________________________ Message 3 _____________________________________ Time: 03:43:07 PM PST US Subject: RVSouthEast-List: Re: new excellent fly-in eatery From: "Scott Keadle" Hi Jim. Tad and I have been working together on my RV-10 project for more than a year, and neither one knew until today that the other one was interested in fly fishing. Maybe he and I should talk about something other than flying sometime while we're working... Anyhow, the 10 should be flying within a month or so, and I'd be interested in this fly-fishing trip that's taking shape. I'm currently based at RUQ. Scott Keadle [quote="tadsargent(at)bellsouth.n"]Jim fly fishing is a hobby of mine as well. I would like to join you on a TN. trip or NC excursion. Tad Sargent [quote]-------------- Original message from "JIM HIGGINS" : -------------- > > > Hi Ron. I've been flying a Titan Tornado the last couple of years, just > got my new 7 (purchased from Rick Gray in Ohio) a few months ago, and > loving it. Painting is scheduled in a few months. I have no experience > with formation, and just a little bit of aerobatics (loops/rolls). I > would be interested in ALL aspects of flying, and always looking to > learn more. > Also, in case anybody cares, I'm an avid fly fisherman, that's my other > hobby, and plan on flying up to Elizabethton, TN on occasion to soak a > couple of flies. > > Jim > > -- -------- Scott Keadle 14A, Lake Norman Airpark N426AK RV-10, final assembly N246SK, Giles 202, flying Read this topic online here: http://forums.matronics.com/viewtopic.php?p=161220#161220 ________________________________ Message 4 _____________________________________ Time: 04:37:16 PM PST US From: "Bill Repucci" Subject: RE: RVSouthEast-List: new excellent fly-in eatery Stormy, It frightens me how much we think alike. How is it you went on to Med school and I went on to detention? Bill R. -----Original Message----- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast-list-server@matronics.com] On Behalf Of Bill Boyd Sent: Tuesday, January 29, 2008 12:32 PM Subject: Re: RVSouthEast-List: new excellent fly-in eatery I used to fish with M-80's, too ;-) when we could get them from South Carolina. I seem to recall they were sold "under the counter" at certain fireworks stands along the highway to Florida, and my Dad had to pay premium price for them. Those were the days. -Stormy On Jan 28, 2008 11:47 PM, Bill Repucci wrote: I'm thinking M-80's will work just fine. They are small and no modification to the RV is required. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rvsoutheast-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RVSouthEast-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rvsoutheast-list Browse Digests http://www.matronics.com/digest/rvsoutheast-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.