---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Sat 01/24/09: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:54 AM - Re: Aircraft Engines on "How it's Made" (N38CW) 2. 04:04 AM - Re: hihi (Steve Glasgow) 3. 05:30 AM - Re: Aircraft Engines on "How it's Made" (Dale Ensing) 4. 02:54 PM - Re: hi (bert murillo) 5. 06:16 PM - on altrak (bert murillo) ________________________________ Message 1 _____________________________________ Time: 03:54:06 AM PST US Subject: RVSouthEast-List: Re: Aircraft Engines on "How it's Made" From: "N38CW" I missed it at 9:00 so I watched it at midnight. It was pretty good, but could have been longer... I searched for it online but haven't found it anywhere. I did see a "Featured Story" about it on Lycoming's website though. They tell about the filming process, and at the end mention the future air times. http://www.lycoming.textron.com/news-and-events/featured-stories/index.html -------- Bill Settle RV-8 Wings (Still) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226506#226506 ________________________________ Message 2 _____________________________________ Time: 04:04:23 AM PST US From: "Steve Glasgow" Subject: Re: RVSouthEast-List: hihi Try B&C at http://www.bandcspecialty.com/ Click on Products and scroll down to S906-1-20. Cappy ________________________________ Message 3 _____________________________________ Time: 05:30:00 AM PST US From: "Dale Ensing" Subject: Re: RVSouthEast-List: Aircraft Engines on "How it's Made" You didn't miss much Larry. It was very general and nothing new to anyone w ho has been around aircraft engines. ----- Original Message ----- From: Larry Bowen To: rvsoutheast-list@matronics.com Sent: Friday, January 23, 2009 9:58 PM Subject: Re: RVSouthEast-List: Aircraft Engines on "How it's Made" Time Warner didn't carry it at my place. If you see it on line let us kn ow! -- Larry Bowen Larry@BowenAero.com http://BowenAero.com On Fri, Jan 23, 2009 at 12:40 PM, N38CW wrote: et> Discovery Science Channel tonight, 9pm EST... Saw this on VAF. http://www.vansairforce.com/community/showthread.php?t=38772 -------- Bill Settle RV-8 Wings (Still) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226383#226383 ========== - st-List" target="_blank">http://www.matronics.com/Navigator?RVSouthEa st-List ========== MS - k">http://forums.matronics.com ========== e - -Matt Dralle, List Admin. t="_blank">http://www.matronics.com/contribution ========== ________________________________ Message 4 _____________________________________ Time: 02:54:14 PM PST US From: bert murillo Subject: Re: RVSouthEast-List: hi John: thanks for the suggestions - bert rv6a --- On Fri, 1/23/09, John Myers wrote: From: John Myers Subject: Re: RVSouthEast-List: hi s> Bert http://www.aircraftspruce.com/catalog/elpages/shieldwire.php or as someone else said get some servo wire from Stein (his will be less expensive for what you need) http://www.steinair.com/wire.htm Or if you can't wait, then twist up some of your own.---Chuck up the wire you need in a drill, tie down the other end stretch it taut and roll your own if you are aware of the wires that you are trying to control noise from or to.- Twisting won't have any appreciable negative effect on the signal s of the AP but will help with noise emissions and/or immunity. Sorry, I don't drink and fly as my bladder is much smaller than my tanks anyway, so can't answer the other question. I do keep a capped bottle of water in the plane but nothing else.- I don' t allow any cola in the plane because of what happens WHEN it gets spilled - not pretty what phosphoric acid does down under the floor panels. John ----- Original Message ----- From: "Bert Murillo" Sent: Friday, January 23, 2009 3:53 PM Subject: RVSouthEast-List: hi > > Hello: > > Maybe a silly question,- any ideas how to hold your coffe, on long > trips, or any beverage..I tried to use one of those auto cup holders, > > with velcro it does not look so good...Maybe one of you talented > persons, have as better idea.. > > 2- Question 2,, I have asked, but no reply,, can one get a 20 gauge > electrical wire, that is shielded?- I cannot find it thru regular > outlets... > > is for the Altrac... > > Thaks for suggestions ideas, > > bert > > rv6a > do not archive... > > le, List Admin. =0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 06:16:08 PM PST US From: bert murillo Subject: RVSouthEast-List: on altrak Hi: I just got my brand new Altrak unit. the question is, on installation, is any way to install this, without having to drill out the rivets from the floor rib...?On the prints looks like one has to remove at least three rivets, on top and 3 at the bottom, on the floor? If this is not done, the plate tha holds the unit, will not set flush against the rib...I guess I want to get out of that job, it may not be as hard as my mind is telling me. Appreciate comments and suggestions, for those already with their unit in operation.. bert rv6a do not archive ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rvsoutheast-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RVSouthEast-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rvsoutheast-list Browse Digests http://www.matronics.com/digest/rvsoutheast-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.