Today's Message Index:
----------------------
1. 06:56 AM - Problem with the CG ()
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Problem with the CG |
\
]Hi:
Would like to hear suggestions or answers to the serious problem I have now
I finish installing the "Altrak Unit" altitude holder.
The isntallatiion as per drawings.everything was tested on the ground it works
OK.
But when I did the flight test, found the plane very unstable. which I pressume
is the C.G being out of the envelope...
Why this? nothing has been changed, as I said installation, standard as per drawings...
I have taken the trouble a lot of work, to remove control surfaces, to check the
elevators, balance, and or
play.
Elevetaros were perfectly balance, I mean perfect...no play on any of the axis...
so now, would appreciate suggestions or ideas...
thanks
Bert
rv6a
do not archive
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|