---------------------------------------------------------- RVSouthEast-List Digest Archive --- Total Messages Posted Fri 10/30/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:24 AM - Re: Re: RVSouthEast-List Digest: 7 Msgs - 10/28/09 (Robert Murillo) 2. 07:24 AM - Re: on fairings (Robert Murillo) 3. 07:26 AM - Re: on fairings (Robert Murillo) 4. 07:28 AM - Re: on fairings (Robert Murillo) ________________________________ Message 1 _____________________________________ Time: 07:24:31 AM PST US From: Robert Murillo Subject: Re: RVSouthEast-List: Re: RVSouthEast-List Digest: 7 Msgs - 10/28/09 STAN: THANKS FOR THE INFO, GODD LOOKINGPLANE BERT --- On Fri, 10/30/09, Speedy11@aol.com wrote: From: Speedy11@aol.com Subject: RVSouthEast-List: Re: RVSouthEast-List Digest: 7 Msgs - 10/28/09 Robert, You can see how I did my fairings.- I'm very happy with them.- The ones on the pants look great (after hours of sanding) and the upper ones fit ve ry nice and are attached with screws so they are very positively attached. - You can nutplate the fuselage even if it is a quickbuild. Here's how I did the lower fairings - http://www.rv-8a.net/2006.htm-scrol l down to Pearl Harbor --Day 7 Dec. Here's how I did the upper fairings - http://www.rv-8a.net/2007.htm-scrol l down to 20 Mar 07. Regards, Stan Sutterfield - Would like o hear sugestions, on how to fasten the fairings on the main leg s of the rv6a. I do not want to drill holes into the fuselage...Suggestions, pictures etc. of best way to do this?--- I meant both, the upper and lower fairings.... - =0A=0A=0A ________________________________ Message 2 _____________________________________ Time: 07:24:31 AM PST US From: Robert Murillo Subject: Re: RVSouthEast-List: on fairings MIKE: THANKS FOR THE INFO... BERT --- On Fri, 10/30/09, N8391Mike@aol.com wrote: From: N8391Mike@aol.com Subject: Re: RVSouthEast-List: on fairings pictures attached - Andre - In a message dated 10/28/2009 10:52:34 A.M. Eastern Daylight Time, robertrv 09@yahoo.com writes: Hi - Would like o hear sugestions, on how to fasten the fairings on the main leg s of the rv6a. I do not want to drill holes into the fuselage...Suggestions, pictures etc. of best way to do this?--- I meant both, the upper and lower fairings.... - thanks - bert - rv6a - do not archaive ist href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www .matronics.com/Navigator?RVSouthEast-List ms.matronics.com/">http://forums.matronics.com tp://www.matronics.com/contribution">http://www.matronics.com/contribution =0A=0A=0A ________________________________ Message 3 _____________________________________ Time: 07:26:08 AM PST US From: Robert Murillo Subject: Re: RVSouthEast-List: on fairings ANDRE: THANKS FOR ALL THE PHOTOS AND INFO.- LOOKS GREAT.. - BERT --- On Thu, 10/29/09, N8391Mike@aol.com wrote: From: N8391Mike@aol.com Subject: Re: RVSouthEast-List: on fairings the bottom fairings are bonded to the wheel pants. The top fairings are pul l against the fuselage with a spring,the fairings were formed over shaped m odeling clay with 4 layers of fiberglass.I did 1 rv6 and two rv7 that way t he 3 aircraft are a shiloh ,SIF,if you like to come and see them . Tomorrow-I will make pictures to send you - Andre - In a message dated 10/28/2009 10:52:34 A.M. Eastern Daylight Time, robertrv 09@yahoo.com writes: Hi - Would like o hear sugestions, on how to fasten the fairings on the main leg s of the rv6a. I do not want to drill holes into the fuselage...Suggestions, pictures etc. of best way to do this?--- I meant both, the upper and lower fairings.... - thanks - bert - rv6a - do not archaive ist href="http://www.matronics.com/Navigator?RVSouthEast-List">http://www .matronics.com/Navigator?RVSouthEast-List ms.matronics.com/">http://forums.matronics.com tp://www.matronics.com/contribution">http://www.matronics.com/contribution =0A=0A=0A ________________________________ Message 4 _____________________________________ Time: 07:28:09 AM PST US From: Robert Murillo Subject: RE: RVSouthEast-List: on fairings Thanks Bill:=C2- I will do that --- On Wed, 10/28/09, Bill Repucci wrote: From: Bill Repucci Subject: RE: RVSouthEast-List: on fairings Bert, =C2- Go to the VAF forum and search on =9Cattach gear leg fairing=9D and you will find lots of info and pictures. =C2- Bill =C2- From: owner-rvsoutheast-list-server@matronics.com [mailto:owner-rvsoutheast -list-server@matronics.com] On Behalf Of Robert Murillo Sent: Wednesday, October 28, 2009 10:19 AM Subject: RVSouthEast-List: on fairings =C2- Hi =C2- Would like o hear sugestions, on how to fasten the fairings on the main leg s of the rv6a. I do not want to drill holes into the fuselage...Suggestions, pictures etc. of best way to do this?=C2-=C2-=C2- I meant both, the upper and lower fairing s.... =C2- thanks =C2- bert =C2- rv6a =C2- do not archaive =C2- =C2- =C2-http://www.matronics.com/Navigator?RVSouthEast-Listhttp ://forums.matronics.comhttp://www.matronics.com/contribution =C2- =0A=0A=0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rvsoutheast-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RVSouthEast-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rvsoutheast-list Browse Digests http://www.matronics.com/digest/rvsoutheast-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.