----------------------------------------------------------
                           Seaplane-List Digest Archive
                                      ---
                     Total Messages Posted Mon 02/06/06: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:04 PM - ready to calk and rivet the first float  (Malcolmbru@aol.com)
     2. 06:26 PM - Re: ready to calk and rivet the first float  (jnbolding1)
     3. 11:54 PM - Re: ready to calk and rivet the first float  (_)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:04:10 PM PST US
From: Malcolmbru@aol.com
Subject: Seaplane-List: ready to calk and rivet the first float

--> Seaplane-List message posted by: Malcolmbru@aol.com

I am ready to calk the first float should I let it set up befour I   revit  
it or do both stepes at the same time?







 
 
 



________________________________  Message 2  _____________________________________


Time: 06:26:15 PM PST US
From: "jnbolding1" <jnbolding1@mail.ev1.net>
Subject: Re: Seaplane-List: ready to calk and rivet the first float

--> Seaplane-List message posted by: "jnbolding1" <jnbolding1@mail.ev1.net>

---------- Original Message ----------------------------------
From: Malcolmbru@aol.com

>--> Seaplane-List message posted by: Malcolmbru@aol.com
>
>I am ready to calk the first float should I let it set up befour I   revit  
>it or do both stepes at the same time?
>
Both at the same time, the clecos and rivets will pull the skin and bulkheads together,
leaving a "gasket" of the goo between them. Have fun , it's a messy operation,
I have started wearing vinyl gloves.  John






 
 
 



________________________________  Message 3  _____________________________________


Time: 11:54:20 PM PST US
From: "_" <raymondj@frontiernet.net>
Subject: Re: Seaplane-List: ready to calk and rivet the first float

--> Seaplane-List message posted by: "_" <raymondj@frontiernet.net>

Hi,

    I'm hoping to build a set of floats sometime in the distant future. I 
was wondering which floats you guys had built / are building and where you 
got the plans.

Thanks,
Rayj
Minnesota

----- Original Message ----- 
From: "jnbolding1" <jnbolding1@mail.ev1.net>
Sent: Monday, February 06, 2006 8:24 PM
Subject: Re: Seaplane-List: ready to calk and rivet the first float


> --> Seaplane-List message posted by: "jnbolding1" 
> <jnbolding1@mail.ev1.net>
>
> ---------- Original Message ----------------------------------
> From: Malcolmbru@aol.com
> Date: Mon, 6 Feb 2006 21:03:19 EST
>
>>--> Seaplane-List message posted by: Malcolmbru@aol.com
>>
>>I am ready to calk the first float should I let it set up befour I   revit
>>it or do both stepes at the same time?
>>
> Both at the same time, the clecos and rivets will pull the skin and 
> bulkheads together, leaving a "gasket" of the goo between them. Have fun , 
> it's a messy operation, I have started wearing vinyl gloves.  John
>
>
>