Today's Message Index:
----------------------
1. 06:13 AM - Fw: Setting Timing (Hugh & Sherry)
2. 07:36 AM - Re: Fw: Setting Timing (Bill Morelli)
3. 02:36 PM - Re: Fw: Setting Timing (The Meiste's)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Stratus-List message posted by: "Hugh & Sherry" <hugs.mackenzie@sympatico.ca>
Kelly,
I have rebuilt my engine due to a couple self inflicted issues (there should
be an e-mail in the archives on how I got to where I am now). I have the
engine mostly assembled and I will be putting it back in the plane in the
next week or so. Am looking forward to seeing how it runs.
Hugh
>
> Thanks for the info Hugh!
> Can I ask why you had to do your timing, having problems or just checking
> it?
> Did the 32 deg at 4,000 rpm seem to set it about right?
> Thanks again,
>
> Kelly
> (STILL waiting for my new distributor to arrive!)
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Setting Timing |
--> Stratus-List message posted by: Bill Morelli <billvt@together.net>
What is an adjustable advance timing light?
BIll
At 10:41 AM 8/27/2003 -0400, you wrote:
>--> Stratus-List message posted by: "Hugh & Sherry"
><hugs.mackenzie@sympatico.ca>
>
> I had the same question a week or so ago. Here is the info I got from
>Mykal's.
>
>
>THEN USE A TIMING LITE WITH AN ADJUSTABLE ADVANCE ON IT .
>SET AT 32 DEGREES AND REV ENG. TO APROX 4000 RPM ADJUST DIST TIMING SO THE
>TIMING MARK ON THE PULLY LINES UP WITH THE CENTER OF THE TOP OF THE CASE
>HAVES
>WHEAR WE HAD A RED MARK.
>
>Hugh
>----- Original Message -----
>From: "The Meiste's" <meiste@essex1.com>
>To: <stratus-list@matronics.com>
>Subject: Stratus-List: Setting Timing
>
>
> > --> Stratus-List message posted by: "The Meiste's" <meiste@essex1.com>
> >
> > You need to set the timing .and that is 30 to 32 degrees total advance at
>4000 rpm.
> >
> > Mykal Templeman,Stratus.
> >
> >
> > List,
> > Mykal states to set the timing on the Stratus EA-81 to 30 to 32 at 4,000
>rpm.
> > My question is how?
> > The only markings I can see is the white dot on the rear pulley which
>aligns with the red mark on the block that seems to indicate TDC.
> > Thanks for any suggestions,
> >
> > Kelly
> >
> >
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Setting Timing |
--> Stratus-List message posted by: "The Meiste's" <meiste@essex1.com>
Bill,
It's basically a standard timing light with an adjustable knob to set the
degree off advance you wish.
So on our Stratus we just turn the dial on the light to 32 deg and adjust
the dist so the red line on the block & the white dot on the pulley are
aligned. Supposedly this will set the engine at 32 deg (at 4,000 RPM). At
least that's how I think it's to be done. Now if I can only borrow one of
these fancy lights from a local car buff. I don't really want to go out &
spend $100 on something I HOPE to rarely use.
Here's a link to a cheap one in the JCW collection.
http://www.jcwhitney.com/product.jhtml?CATID=437408&BQ=jcw2
Kelly
(STILL waiting for my new dist!)
----- Original Message -----
From: "Bill Morelli" <billvt@together.net>
Subject: Re: Fw: Stratus-List: Setting Timing
> --> Stratus-List message posted by: Bill Morelli <billvt@together.net>
>
> What is an adjustable advance timing light?
>
> BIll
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|