Today's Message Index:
----------------------
1. 04:36 PM - Re: Stratus first run-ups (Bill Cardell)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Stratus first run-ups |
--> Stratus-List message posted by: Bill Cardell <bill@flyinmiata.com>
Ones I've seen were mild steel.
Bill Cardell (TurboDog's Dad)
Flyin' Miata
www.flyinmiata.com
www.fmprotege.com
970-242-3800
-----Original Message-----
From: gary [mailto:FlyinK@efortress.com]
Subject: Re: Stratus-List: Stratus first run-ups
--> Stratus-List message posted by: "gary" <FlyinK@Efortress.com>
was that on stainless or mild steel exhaust? i've heard not to wrap mild
steel but that stainless was ok. i also ceramic coated mine before wrapping
and that is supposed to help.
gary
----- Original Message -----
From: "Bill Cardell" <bill@flyinmiata.com>
Subject: RE: Stratus-List: Stratus first run-ups
> --> Stratus-List message posted by: Bill Cardell <bill@flyinmiata.com>
>
> I think I'd be looking annually. We've seen some Miata headers just
> completely fall apart under the heat wrap, plus I tried it on a turbo
> downpipe and it self destructed.
>
> Bill Cardell (TurboDog's Dad)
> bill@flyinmiata.com
> Flyin' Miata
> 1-800-359-6957 (sales only)
> 970-242-3800 (tech support)
> http://flyinmiata.com
> http://flyinprotege.com
>
> -----Original Message-----
> From: Larry McFarland [mailto:larrymc@qconline.com]
> To: stratus-list@matronics.com
> Subject: Re: Stratus-List: Stratus first run-ups
>
>
> --> Stratus-List message posted by: "Larry McFarland"
<larrymc@qconline.com>
>
>
> Bill,
> Is this something that happens rapidly or does it
> occur over a period of 3 to 5 years? Or would you include this to
> your annual inspection?
>
> Larry
>
> Subject: RE: Stratus-List: Stratus first run-ups
>
>
> > --> Stratus-List message posted by: Bill Cardell
> > --> <bill@flyinmiata.com>
> >
> > Larry,
> > Please do a periodic check of your exhaust pipes under the wrap.
> Experience
> > I've had with the wrap is that it takes the welds out, I suspect it
> > is concentrating too much heat. Does what it is supposed to (the
> > good
part),
> > but I'm just scared of what it's doing to the pipes below it. YMMV
> >
>
>
advertising on the Matronics Forums.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|