---------------------------------------------------------- Stratus-List Digest Archive --- Total Messages Posted Sat 03/27/04: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:36 PM - Re: Stratus first run-ups (Bill Cardell) ________________________________ Message 1 _____________________________________ Time: 04:36:29 PM PST US From: Bill Cardell Subject: RE: Stratus-List: Stratus first run-ups --> Stratus-List message posted by: Bill Cardell Ones I've seen were mild steel. Bill Cardell (TurboDog's Dad) Flyin' Miata www.flyinmiata.com www.fmprotege.com 970-242-3800 -----Original Message----- From: gary [mailto:FlyinK@efortress.com] Subject: Re: Stratus-List: Stratus first run-ups --> Stratus-List message posted by: "gary" was that on stainless or mild steel exhaust? i've heard not to wrap mild steel but that stainless was ok. i also ceramic coated mine before wrapping and that is supposed to help. gary ----- Original Message ----- From: "Bill Cardell" Subject: RE: Stratus-List: Stratus first run-ups > --> Stratus-List message posted by: Bill Cardell > > I think I'd be looking annually. We've seen some Miata headers just > completely fall apart under the heat wrap, plus I tried it on a turbo > downpipe and it self destructed. > > Bill Cardell (TurboDog's Dad) > bill@flyinmiata.com > Flyin' Miata > 1-800-359-6957 (sales only) > 970-242-3800 (tech support) > http://flyinmiata.com > http://flyinprotege.com > > -----Original Message----- > From: Larry McFarland [mailto:larrymc@qconline.com] > To: stratus-list@matronics.com > Subject: Re: Stratus-List: Stratus first run-ups > > > --> Stratus-List message posted by: "Larry McFarland" > > > Bill, > Is this something that happens rapidly or does it > occur over a period of 3 to 5 years? Or would you include this to > your annual inspection? > > Larry > > Subject: RE: Stratus-List: Stratus first run-ups > > > > --> Stratus-List message posted by: Bill Cardell > > --> > > > > Larry, > > Please do a periodic check of your exhaust pipes under the wrap. > Experience > > I've had with the wrap is that it takes the welds out, I suspect it > > is concentrating too much heat. Does what it is supposed to (the > > good part), > > but I'm just scared of what it's doing to the pipes below it. YMMV > > > > advertising on the Matronics Forums.