----------------------------------------------------------
                           Stratus-List Digest Archive
                                      ---
                     Total Messages Posted Wed 01/12/05: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:45 PM - Re: bearing maintenance  (Weston, Jim)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:45:50 PM PST US
Subject: RE: Stratus-List: bearing maintenance
From: "Weston, Jim" <Jim.Weston@delta.com>

--> Stratus-List message posted by: "Weston, Jim" <Jim.Weston@delta.com>

I assume that you have noticed that there is a very large locking washer
with bend down tabs to hold it in place.  You need to bend the tabs up.

Jim Weston
601HDS
Concord, Ga 

-----Original Message-----
From: owner-stratus-list-server@matronics.com
[mailto:owner-stratus-list-server@matronics.com] On Behalf Of
N53dw@aol.com
Subject: Stratus-List: bearing maintenance

--> Stratus-List message posted by: N53dw@aol.com

Gotta repack my prop shaft bearings.  Can anyone shed some light on how
to remove those nuts off the back of the prop shaft?  I tried the
hammer-and-drift punch routine.  Didn't even budge.  Those are come fine
maintenance instructions in the manual, eh?

Danny Williamson
Kitfox 5