---------------------------------------------------------- Stratus-List Digest Archive --- Total Messages Posted Wed 08/03/05: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:32 AM - Re: Fuel Pump ? (Hans Teijgeler) 2. 05:59 AM - Re: Fuel Pump ? (Larry McFarland) 3. 07:43 AM - Re: Fuel Pump ? (Hinde, Frank George (Corvallis)) ________________________________ Message 1 _____________________________________ Time: 12:32:12 AM PST US From: "Hans Teijgeler" Subject: Re: Stratus-List: Fuel Pump ? (not processed: message from valid local sender) --> Stratus-List message posted by: "Hans Teijgeler" Andy, 18 gauge will do just fine. 20 might even do, but I don't think you'll want to go that small. Too fragile. Hans -----Original Message----- From: "Andy Fultz" Subject: Stratus-List: Fuel Pump ? > --> Stratus-List message posted by: "Andy Fultz" > > > Do any of you guys have any idea about the current requirements for the > Facet Fuel Pump that STRATUS shipped with their EA-81 engine. It is a > Facet > # 40106 I think. I need to know what size wire to use to run the > thing. > Thanks > > Andy F. > > > > > > ________________________________ Message 2 _____________________________________ Time: 05:59:12 AM PST US From: Larry McFarland Subject: Re: Stratus-List: Fuel Pump ? --> Stratus-List message posted by: Larry McFarland Andy, I used 16 gage for my four 40105 Facet pumps. Larry McFarland - 601HDS at www.macsmachine.com do not archive Andy Fultz wrote: >--> Stratus-List message posted by: "Andy Fultz" > > >Do any of you guys have any idea about the current requirements for the >Facet Fuel Pump that STRATUS shipped with their EA-81 engine. It is a Facet ># 40106 I think. I need to know what size wire to use to run the thing. >Thanks > >Andy F. > > > > ________________________________ Message 3 _____________________________________ Time: 07:43:18 AM PST US Subject: RE: Stratus-List: Fuel Pump ? From: "Hinde, Frank George (Corvallis)" --> Stratus-List message posted by: "Hinde, Frank George (Corvallis)" The 40106 is the correct one. I assume you are not going to rely on a single pump? You really should have a second for redundancy. The pumps draw just over an amp and I use 5 amp fused circuit to each pump. Frank 601HDS stratus with Ram Heads 370 hours -----Original Message----- From: owner-stratus-list-server@matronics.com [mailto:owner-stratus-list-server@matronics.com] On Behalf Of Larry McFarland Subject: Re: Stratus-List: Fuel Pump ? --> Stratus-List message posted by: Larry McFarland --> Andy, I used 16 gage for my four 40105 Facet pumps. Larry McFarland - 601HDS at www.macsmachine.com do not archive Andy Fultz wrote: >--> Stratus-List message posted by: "Andy Fultz" > > >Do any of you guys have any idea about the current requirements for the >Facet Fuel Pump that STRATUS shipped with their EA-81 engine. It is a >Facet # 40106 I think. I need to know what size wire to use to run the thing. >Thanks > >Andy F. > > > >