Today's Message Index:
----------------------
1. 07:28 AM - Re: Re: ignition module wiring (Hinde, Frank George (Corvallis))
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | re: ignition module wiring |
--> Stratus-List message posted by: "Hinde, Frank George (Corvallis)" <frank.hinde@hp.com>
Yes I had to wire mine up the way Bill said...even though the original
instructions showed the W & G wires reversed...It didn't work this way.
One thing missing from the instructions below is the ground needed for
the stud...This HAS to be a very good ground, I uses a separate wire
back to the engine block just to make sure.
Frank
-----Original Message-----
From: owner-stratus-list-server@matronics.com
[mailto:owner-stratus-list-server@matronics.com] On Behalf Of Bill
Morelli
Sent: Friday, January 27, 2006 4:31 PM
Subject: Stratus-List: re: ignition module wiring
--> Stratus-List message posted by: "Bill Morelli" <billvt@together.net>
Mag Pickup + (usually a red wire) goes to TP45 G
Mag Pickup - (usually a white wire) goes to TP45 W Coil + goes to TP45
B Coil - goes to TP45 C
Regards,
Bill
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|