---------------------------------------------------------- Stratus-List Digest Archive --- Total Messages Posted Mon 01/30/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:28 AM - Re: Re: ignition module wiring (Hinde, Frank George (Corvallis)) ________________________________ Message 1 _____________________________________ Time: 07:28:32 AM PST US Subject: RE: Stratus-List: re: ignition module wiring From: "Hinde, Frank George (Corvallis)" --> Stratus-List message posted by: "Hinde, Frank George (Corvallis)" Yes I had to wire mine up the way Bill said...even though the original instructions showed the W & G wires reversed...It didn't work this way. One thing missing from the instructions below is the ground needed for the stud...This HAS to be a very good ground, I uses a separate wire back to the engine block just to make sure. Frank -----Original Message----- From: owner-stratus-list-server@matronics.com [mailto:owner-stratus-list-server@matronics.com] On Behalf Of Bill Morelli Sent: Friday, January 27, 2006 4:31 PM Subject: Stratus-List: re: ignition module wiring --> Stratus-List message posted by: "Bill Morelli" Mag Pickup + (usually a red wire) goes to TP45 G Mag Pickup - (usually a white wire) goes to TP45 W Coil + goes to TP45 B Coil - goes to TP45 C Regards, Bill