----------------------------------------------------------
                           Stratus-List Digest Archive
                                      ---
                     Total Messages Posted Tue 05/02/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:24 PM - Rotor gap  (Tim & Diane Shankland)
     2. 05:51 PM - Re: Rotor gap  (LarryMcFarland)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:24:42 PM PST US
From: Tim & Diane Shankland <tshank@core.com>
Subject: Stratus-List: Rotor gap

--> Stratus-List message posted by: Tim & Diane Shankland <tshank@core.com>

I'm trying to find out the the proper gap is between the magnetic pickup 
in the distributor the the rotor that triggers it on a Stratus Subaru, 
0.020 won't work and 0.011 will, but what is the spec on this?

Tim Shankland






 
 
 



________________________________  Message 2  _____________________________________


Time: 05:51:22 PM PST US
From: LarryMcFarland <larry@macsmachine.com>
Subject: Re: Stratus-List: Rotor gap

--> Stratus-List message posted by: LarryMcFarland <larry@macsmachine.com>

Tim,
The factory gap setting is .008 to .016.  A smaller gap will result in a 
spark at a lower rpm than with the larger gap.
Play in the distributor shaft should not be allowed to take the gap out 
of the tolerance range.
Taken from the instruction manual by Paul Messenger.

Larry McFarland - 601HDS at www.macsmachine.com

Tim & Diane Shankland wrote:

>--> Stratus-List message posted by: Tim & Diane Shankland <tshank@core.com>
>
>I'm trying to find out the the proper gap is between the magnetic pickup 
>in the distributor the the rotor that triggers it on a Stratus Subaru, 
>0.020 won't work and 0.011 will, but what is the spec on this?
>
>Tim Shankland
>
>
> 
> 
> 
>
>
>  
>