---------------------------------------------------------- Stratus-List Digest Archive --- Total Messages Posted Wed 05/03/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:42 PM - Re: Rotor gap (Tim & Diane Shankland) ________________________________ Message 1 _____________________________________ Time: 05:42:38 PM PST US From: Tim & Diane Shankland Subject: Re: Stratus-List: Rotor gap --> Stratus-List message posted by: Tim & Diane Shankland Thanks, that's what I was looking for. Tim Do not archive LarryMcFarland wrote: >--> Stratus-List message posted by: LarryMcFarland > >Tim, >The factory gap setting is .008 to .016. A smaller gap will result in a >spark at a lower rpm than with the larger gap. >Play in the distributor shaft should not be allowed to take the gap out >of the tolerance range. >Taken from the instruction manual by Paul Messenger. > >Larry McFarland - 601HDS at www.macsmachine.com > >Tim & Diane Shankland wrote: > > > >>--> Stratus-List message posted by: Tim & Diane Shankland >> >>I'm trying to find out the the proper gap is between the magnetic pickup >>in the distributor the the rotor that triggers it on a Stratus Subaru, >>0.020 won't work and 0.011 will, but what is the spec on this? >> >>Tim Shankland >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > > > > > > > > >